7 warehouses in Europe
Klüber Summit
-
Klüber Summit PS 300
Quick orderingMore infoKlüber Summit PS 300
Semi-synthetic air compressor oils for oil change intervals up to 5,000 operating hours
Application Klüber Summit PS 300
Klüber Summit PS oils have been especially designed for the lubrication of screw-type and reciprocating piston compressors. They are used for oil change intervals up to 5,000 operating hours in oil-injected screw-type compressors. Klüber Summit PS oils can be used for compressors that were previously run with conventional mineral oils. These oils are neutral towards most elastomer seals used in air compressors, therefore leakage is not to be expected. Klüber Summit PS oils are used for compressors which do not achieve the desired maintenance intervals when using mineral oils and where the use of fully synthetic oils would be uneconomical due to ingress of contamination or a low number of operating hours per year. Klüber Summit PS 100 can also be used for the lubrication of turbocompressors, whereas Klüber Summit PS 300 and 400 have been especially developed for reciprocating piston compressors. Klüber Summit PS oils offer good oxidation stability due to the synthetic base oil content, thus minimising oxidation residues in the compressors and extending oil change intervals and the service life of oil filters and separators. Special inhibitors contained in the oil keep the inside of compressors clean and ensure a high efficiency.
Show moreStarting at: € 13,34 / L -
Klüber Summit FG 500
Quick orderingMore infoKlüber Summit FG 500
Fully synthetic compressor oils for the food-processing and pharmaceutical industries
Application Klüber Summit FG 500
Klüber Summit FG oils can be used as vacuum pump oils, evacuating air or inert gases if a food grade oil is required. Klüber Summit FG oils can be used for oil-injected screw-type compressors, reciprocating piston compressors and rotary vane compressors. Klüber Summit FG oils are intended for use in compressors of the food-processing and pharmaceutical industries requiring oilfree compressed air (without oil vapour, which cannot be removed by the oil separator). These oils are also suitable for gear lubrication in oil-free screwtype compressors.
Show moreStarting at: € 28,38 / L -
Klüber Summit HySyn FG 15
Quick orderingMore infoKlüber Summit HySyn FG 15
Fully synthetic compressor oils for the food-processing and pharmaceutical industry
Application Klüber Summit HySyn FG 15
Klüber Summit HySyn oils can be used for oil-injected screwtype compressors, reciprocating piston compressors and centrifugal compressors. Klüber Summit HySyn FG oils are intended for use in compressors of the food-processing and pharmaceutical industry requiring oil-free compressed air (without oil vapour which cannot be removed by the oil separator). Klüber Summit HySyn FG oils can also be used for the lubrication of gears in oil-free screw-type compressors. Owing to their good stability, these oils are also suitable for lowtemperature applications in industrial gears. Furthermore, Klüber Summit HySyn FG 32-46-68 oils are used in chains, particularly those operating at low temperatures, e.g. in freezing tunnels.
Show moreStarting at: € 28,20 / L -
Klüber Summit SH 46
Quick orderingMore infoKlüber Summit SH 46
Synthetic air compressor oils for oil change intervals up to 10,000 operating hours
Application Klüber Summit SH 46
Klüber Summit SH oils have been designed especially for the lubrication of highly loaded, oil-injected screw-type compressors with oil change intervals up to 10,000 operating hours. Klüber Summit SH oils can also be used for compressors that were previously run with mineral oils. They are neutral towards most elastomer seals used in air compressors, therefore leakage is not to be expected. Klüber Summit SH 32 is especially suitable for centrifugal compressors and Klüber Summit SH 100 for reciprocating piston compressors. Klüber Summit SH oils offer good oxidation stability due to the synthetic base oil, thus minimizing oxidation residues in the compressors and extending oil change intervals and the service life of oil filters and separators. Special inhibitors contained in the oils keep the inside of compressors clean. Owing to the evaporation stability of the base oil, the oil vapour content in the compressed air can be considerably reduced compared to conventional mineral oils. This contributes to a reduction of oil consumption and clean compressed air; gumming of pneumatic valves in the compressed air circuit can be prevented as well due to the low oil content of the Klüber Summit SH oils.
Show moreStarting at: € 28,31 / L -
Klüber Summit SH 32
Quick orderingMore infoKlüber Summit SH 32
Synthetic air compressor oils for oil change intervals up to 10,000 operating hours
Application Klüber Summit SH 32
Klüber Summit SH oils have been designed especially for the lubrication of highly loaded, oil-injected screw-type compressors with oil change intervals up to 10,000 operating hours. Klüber Summit SH oils can also be used for compressors that were previously run with mineral oils. They are neutral towards most elastomer seals used in air compressors, therefore leakage is not to be expected. Klüber Summit SH 32 is especially suitable for centrifugal compressors and Klüber Summit SH 100 for reciprocating piston compressors. Klüber Summit SH oils offer good oxidation stability due to the synthetic base oil, thus minimizing oxidation residues in the compressors and extending oil change intervals and the service life of oil filters and separators. Special inhibitors contained in the oils keep the inside of compressors clean. Owing to the evaporation stability of the base oil, the oil vapour content in the compressed air can be considerably reduced compared to conventional mineral oils. This contributes to a reduction of oil consumption and clean compressed air; gumming of pneumatic valves in the compressed air circuit can be prevented as well due to the low oil content of the Klüber Summit SH oils.
Show moreStarting at: € 18,72 / L -
Klüber Summit TM 15
Quick orderingMore infoKlüber Summit TM 15
Air compressor oils enabling oil change intervals up to 3,000 operating hours
Application Klüber Summit TM 15
Klüber Summit TM 15 and Klüber Summit TM 20 were especially developed for the lubrication of oil-injected screwtype compressors. Under normal operating conditions, these oils achieve oil change intervals of up to 3,000* operating hours. Used compressors can be converted from conventional mineral oils to Klüber Summit TM 15 or 20, which are neutral towards most elastomers typically used in air compressors - no leakage is to be expected. Klüber Summit TM oils were developed for compressors where the use of fully synthetic oils is undesirable or where such oils would not make sense economically due to a limited number of operating hours per year. Klüber Summit TM 15 and TM 20 have a synthetic base oil component, providing good resistance to oxidation, reducing the formation of residues in the compressor. The oils contain specific inhibitors to keep compressors clean to improve compressor efficiency. *Normal operating conditions are: discharge temperature max. 85 °C, final discharge pressure max. 8 bar, dry and clean intake air and circulation rate of the oil in the compressor less than 1.5. For higher temperatures, please turn to your contact at Klüber Lubrication.
Show moreStarting at: € 8,21 / L -
Klüber Summit PS 400
Quick orderingMore infoKlüber Summit PS 400
Semi-synthetic air compressor oils for oil change intervals up to 5,000 operating hours
Application Klüber Summit PS 400
Klüber Summit PS oils have been especially designed for the lubrication of screw-type and reciprocating piston compressors. They are used for oil change intervals up to 5,000 operating hours in oil-injected screw-type compressors. Klüber Summit PS oils can be used for compressors that were previously run with conventional mineral oils. These oils are neutral towards most elastomer seals used in air compressors, therefore leakage is not to be expected. Klüber Summit PS oils are used for compressors which do not achieve the desired maintenance intervals when using mineral oils and where the use of fully synthetic oils would be uneconomical due to ingress of contamination or a low number of operating hours per year. Klüber Summit PS 100 can also be used for the lubrication of turbocompressors, whereas Klüber Summit PS 300 and 400 have been especially developed for reciprocating piston compressors. Klüber Summit PS oils offer good oxidation stability due to the synthetic base oil content, thus minimising oxidation residues in the compressors and extending oil change intervals and the service life of oil filters and separators. Special inhibitors contained in the oil keep the inside of compressors clean and ensure a high efficiency.
Show moreStarting at: € 16,17 / L -
Klüber Summit SH 68
Quick orderingMore infoKlüber Summit SH 68
Synthetic air compressor oils for oil change intervals up to 10,000 operating hours
Application Klüber Summit SH 68
Klüber Summit SH oils have been designed especially for the lubrication of highly loaded, oil-injected screw-type compressors with oil change intervals up to 10,000 operating hours. Klüber Summit SH oils can also be used for compressors that were previously run with mineral oils. They are neutral towards most elastomer seals used in air compressors, therefore leakage is not to be expected. Klüber Summit SH 32 is especially suitable for centrifugal compressors and Klüber Summit SH 100 for reciprocating piston compressors. Klüber Summit SH oils offer good oxidation stability due to the synthetic base oil, thus minimizing oxidation residues in the compressors and extending oil change intervals and the service life of oil filters and separators. Special inhibitors contained in the oils keep the inside of compressors clean. Owing to the evaporation stability of the base oil, the oil vapour content in the compressed air can be considerably reduced compared to conventional mineral oils. This contributes to a reduction of oil consumption and clean compressed air; gumming of pneumatic valves in the compressed air circuit can be prevented as well due to the low oil content of the Klüber Summit SH oils.
Show moreStarting at: € 29,69 / L -
Klüber Summit PS 200
Quick orderingMore infoKlüber Summit PS 200
Semi-synthetic air compressor oils for oil change intervals up to 5,000 operating hours
Application Klüber Summit PS 200
Klüber Summit PS oils have been especially designed for the lubrication of screw-type and reciprocating piston compressors. They are used for oil change intervals up to 5,000 operating hours in oil-injected screw-type compressors. Klüber Summit PS oils can be used for compressors that were previously run with conventional mineral oils. These oils are neutral towards most elastomer seals used in air compressors, therefore leakage is not to be expected. Klüber Summit PS oils are used for compressors which do not achieve the desired maintenance intervals when using mineral oils and where the use of fully synthetic oils would be uneconomical due to ingress of contamination or a low number of operating hours per year. Klüber Summit PS 100 can also be used for the lubrication of turbocompressors, whereas Klüber Summit PS 300 and 400 have been especially developed for reciprocating piston compressors. Klüber Summit PS oils offer good oxidation stability due to the synthetic base oil content, thus minimising oxidation residues in the compressors and extending oil change intervals and the service life of oil filters and separators. Special inhibitors contained in the oil keep the inside of compressors clean and ensure a high efficiency.
Show moreStarting at: € 14,40 / L -
Klüber Summit PS 150
Quick orderingMore infoKlüber Summit PS 150
Semi-synthetic air compressor oils for oil change intervals up to 5,000 operating hours
Application Klüber Summit PS 150
Klüber Summit PS oils have been especially designed for the lubrication of screw-type and reciprocating piston compressors. They are used for oil change intervals up to 5,000 operating hours in oil-injected screw-type compressors. Klüber Summit PS oils can be used for compressors that were previously run with conventional mineral oils. These oils are neutral towards most elastomer seals used in air compressors, therefore leakage is not to be expected. Klüber Summit PS oils are used for compressors which do not achieve the desired maintenance intervals when using mineral oils and where the use of fully synthetic oils would be uneconomical due to ingress of contamination or a low number of operating hours per year. Klüber Summit PS 100 can also be used for the lubrication of turbocompressors, whereas Klüber Summit PS 300 and 400 have been especially developed for reciprocating piston compressors. Klüber Summit PS oils offer good oxidation stability due to the synthetic base oil content, thus minimising oxidation residues in the compressors and extending oil change intervals and the service life of oil filters and separators. Special inhibitors contained in the oil keep the inside of compressors clean and ensure a high efficiency.
Show moreStarting at: € 14,40 / L -
Klüber Summit SB 68
Quick orderingMore infoKlüber Summit SB 68
Synthetic air compressor oils for oil change intervals up to 8,000 operating hours
Application Klüber Summit SB 68
Klüber Summit SB oils have been especially designed for screw-type compressors subject to high loads. They are used for oil change intervals up to 8,000 operating hours in air compressors. Klüber Summit SB oils can be used for compressors that were previously run with mineral oils. Klüber Summit SB oils are neutral towards most elastomer seals used in air compressors, therefore leakage is not to be expected. Klüber Summit SB oils offer good oxidation stability due to the synthetic base oil content, thus minimising oxidation residues in the compressors and extending oil change intervals and the service life of oil filters and separators. Special inhibitors contained in the oil keep the inside of compressors clean and ensure a high efficiency. Owing to the evaporation stability of the base oil, the oil vapour content in the compressed air can be reduced several-fold compared to conventional mineral oils. This contributes to a reduction of oil consumption and clean compressed air; it also helps to prevent gumming of pneumatic valves in the compressed air circuit.
Show moreStarting at: € 20,21 / L -
Klüber Summit FG 100
Quick orderingMore infoKlüber Summit FG 100
Fully synthetic compressor oils for the food-processing and pharmaceutical industries
Application Klüber Summit FG 100
Klüber Summit FG oils can be used as vacuum pump oils, evacuating air or inert gases if a food grade oil is required. Klüber Summit FG oils can be used for oil-injected screw-type compressors, reciprocating piston compressors and rotary vane compressors. Klüber Summit FG oils are intended for use in compressors of the food-processing and pharmaceutical industries requiring oilfree compressed air (without oil vapour, which cannot be removed by the oil separator). These oils are also suitable for gear lubrication in oil-free screwtype compressors.
Show moreStarting at: € 21,75 / L -
Klüber Summit LCG 100
Quick orderingMore infoKlüber Summit LCG 100
Synthetic compressor oils for acidic and reactive gases such as landfill and biogases.
Application Klüber Summit LCG 100
The Klüber Summit LCG series was developed for application in screw-type compressors working with natural gases or the reactive and corrosive gases encountered in biogas plants, refineries, EOR processes or the chemical industry. Klüber Summit LCG compressor oils do not contain sulphur or any other elements that might react with chlorine-containing components or acidic gases. They can also be used with gases containing chlorine where mineral oils, esters or polyglycols are not suitable for application. Klüber Summit LCG compressor oils protect surfaces against the corrosive effects of acidic gases such as hydrogen sulphide or carbon dioxide. To select the right viscosity, the composition of the gas flow and all other operating conditions have to be known in detail. Please consult your contact at Klüber Lubrication in this matter.
Show moreStarting at: € 23,91 / L -
Klüber Summit Ultima 68
Quick orderingMore infoKlüber Summit Ultima 68
Synthetic air compressor oils for oil change intervals up to 12,000 operating hours
Application Klüber Summit Ultima 68
Klüber Summit Ultima oils have been especially designed for screw-type compressors subject to high loads. They are used for oil change intervals up to 12,000 operating hours in oilinjected screw-type compressors. Klüber Summit Ultima oils can be used for compressors that were previously run with mineral oils. Klüber Summit Ultima oils are neutral towards most elastomer seals used in air compressors, therefore leakage is not to be expected. Klüber Summit Ultima oils offer better oxidation stability than conventional synthetic oils due to the synthetic base oil content, thus minimising oxidation residues in the compressors and extending oil change intervals and the service life of oil filters and separators. Special inhibitors contained in the oil keep the inside of compressors clean and ensure a high efficiency. Owing to the evaporation stability of the base oil, the oil vapour content in the compressed air can be reduced several-fold compared to conventional mineral oils. This contributes to a reduction of oil consumption and clean compressed air; it also helps to prevent the gumming of pneumatic valves in the compressed air circuit.
Show moreStarting at: € 28,53 / L -
Klüber Summit DSL 46
Quick orderingMore infoKlüber Summit DSL 46
Fully synthetic air compressor oils for oil change intervals up to 8,000 operating hours
Application Klüber Summit DSL 46
The Klüber Summit DSL 32 … 68 oils have been especially designed for oil change intervals up to 8,000 operating hours* in oil-injected screw-type compressors. Klüber Summit DSL 32 and 46 can also be used for the lubrication of centrifugal compressors, whereas Klüber Summit DSL 68 ... 125 is particularly suitable for the lubrication reciprocating piston compressors. Klüber Summit DSL oils are used for compressors that were previously run with conventional mineral oils. These oils are neutral towards most elastomer seals used in air compressors, therefore leakage is not to be expected. Klüber Summit DSL 32 oils are mainly used in reciprocating piston compressors which do not achieve the desired maintenance intervals when using mineral oils or which show severe residue formation (carbon buildups) on valves and in the compression chamber. Klüber Summit DSL 32, 46, and 68 are biodegradable and can therefore be used in eco-sensitive applications. Klüber Summit DSL oils offer good oxidation stability due to the synthetic base oil, thus minimizing oxidation residues in the compressors and extending oil change intervals and the service life of oil filters and separators (screw-type compressors) and valves (reciprocating piston compressors).
Show moreStarting at: € 17,75 / L -
Klüber Summit FG 250
Quick orderingMore infoKlüber Summit FG 250
Volledig synthetische compressoroliën voor de voedselverwerkende en farmaceutische industrie industrieën
Toepassing Klüber Summit FG 250
Klüber Summit FG oliën kunnen worden gebruikt als vacuümpompolie, het afvoeren van lucht of inerte gassen als een voedselveilige olie nodig is. Klüber Summit FG oliën kunnen worden gebruikt voor oliegeïnjecteerde schroeven. compressoren, zuigercompressoren en draaischoepen compressoren. Klüber Summit FG oliën zijn bedoeld voor gebruik in compressoren van de voedselverwerkende en farmaceutische industrie die olievrije perslucht nodig heeft (zonder oliedamp, wat niet kan verwijderd door de olieafscheider). Deze oliën zijn ook geschikt voor de smering van tandwielen in olievrije schroefcompressoren.
Show moreStarting at: € 25,52 / L -
Klüber Summit FG 300
Quick orderingMore infoKlüber Summit FG 300
Fully synthetic compressor oils for the food-processing and pharmaceutical industries
Application Klüber Summit FG 300
Klüber Summit FG oils can be used as vacuum pump oils, evacuating air or inert gases if a food grade oil is required. Klüber Summit FG oils can be used for oil-injected screw-type compressors, reciprocating piston compressors and rotary vane compressors. Klüber Summit FG oils are intended for use in compressors of the food-processing and pharmaceutical industries requiring oilfree compressed air (without oil vapour, which cannot be removed by the oil separator). These oils are also suitable for gear lubrication in oil-free screwtype compressors.
Show moreStarting at: € 26,37 / L -
Klüber Summit NGSH 68
Quick orderingMore infoKlüber Summit NGSH 68
Synthetic gas compressor lubricants
Application Klüber Summit NGSH 68
Klüber Summit NGSH are designed for rotary screw and reciprocating compressors in natural gas service. Due to the varying make-up of gases and operating conditions, please contact your local Klüber representative for specific product recommendations.
Show moreStarting at: € 26,31 / L -
Klüber Summit Ultima 46
Quick orderingMore infoKlüber Summit SH 100
Synthetic air compressor oils for oil change intervals up to 10,000 operating hours
Application Klüber Summit SH 100
Klüber Summit SH oils have been designed especially for the lubrication of highly loaded, oil-injected screw-type compressors with oil change intervals up to 10,000 operating hours. Klüber Summit SH oils can also be used for compressors that were previously run with mineral oils. They are neutral towards most elastomer seals used in air compressors, therefore leakage is not to be expected. Klüber Summit SH 32 is especially suitable for centrifugal compressors and Klüber Summit SH 100 for reciprocating piston compressors. Klüber Summit SH oils offer good oxidation stability due to the synthetic base oil, thus minimizing oxidation residues in the compressors and extending oil change intervals and the service life of oil filters and separators. Special inhibitors contained in the oils keep the inside of compressors clean. Owing to the evaporation stability of the base oil, the oil vapour content in the compressed air can be considerably reduced compared to conventional mineral oils. This contributes to a reduction of oil consumption and clean compressed air; gumming of pneumatic valves in the compressed air circuit can be prevented as well due to the low oil content of the Klüber Summit SH oils.
Show moreStarting at: € 27,50 / L -
Klüber Summit DSL 125
Quick orderingMore infoKlüber Summit DSL 125
Fully synthetic air compressor oils for oil change intervals up to 8,000 operating hours
Application Klüber Summit DSL 125
The Klüber Summit DSL 32 … 68 oils have been especially designed for oil change intervals up to 8,000 operating hours* in oil-injected screw-type compressors. Klüber Summit DSL 32 and 46 can also be used for the lubrication of centrifugal compressors, whereas Klüber Summit DSL 68 ... 125 is particularly suitable for the lubrication reciprocating piston compressors. Klüber Summit DSL oils are used for compressors that were previously run with conventional mineral oils. These oils are neutral towards most elastomer seals used in air compressors, therefore leakage is not to be expected. Klüber Summit DSL 32 oils are mainly used in reciprocating piston compressors which do not achieve the desired maintenance intervals when using mineral oils or which show severe residue formation (carbon buildups) on valves and in the compression chamber. Klüber Summit DSL 32, 46, and 68 are biodegradable and can therefore be used in eco-sensitive applications. Klüber Summit DSL oils offer good oxidation stability due to the synthetic base oil, thus minimizing oxidation residues in the compressors and extending oil change intervals and the service life of oil filters and separators (screw-type compressors) and valves (reciprocating piston compressors).
Show moreStarting at: € 29,35 / L
Our customers value us
"We like your site, it shows that you are experts in lubricants!"
-- Ian Adair
"You deliver quicker than our previous UK supplier!"
-- Cris Scullion
"Surprise to us!
We paid to much in the past"
-- Stuart Wyatt
Our customers value us
"We like your site, it shows that you are experts in lubricants!"
-- Ian Adair
"You deliver quicker than our previous UK supplier!"
-- Cris Scullion
"Surprise to us!
We paid to much in the past"
-- Stuart Wyatt