Biodegradable oil

Klüber Klüberbio AG 39-602

Environmentally acceptable adhesive lubricant for open gears and steel cables

Application Klüber Klüberbio AG 39-602

Klüberbio AG 39-602 was developed for the lubrication of open pinion gears on winches and jack-up platforms, as well as steel cables in contact with water. The product can also be used in other maritime applications that require lubricants to have good water washout resistance, very good anti-corrosion resistance and/or good load-carrying capacity such as with low-speed plain bearings, guide rails and open winch gears.

Q8 da Vinci P 6

A concrete mould release agent designed to give the work-piece a smooth surface finish, whilst ensuring easy release

Applications Q8 da Vinci P 6

The Q8 da Vinci range has been specifically developed for concrete demoulding where the oil creates a layer between the concrete and the mould

This layer is a critical part of the process as the chemistry of the product will cause soap formations at the interface

Q8 da Vinci P 6 is typically used for demoulding of: Prefab sewage pipes, On site elements

Your advantage! Price of Q8 da Vinci P 6 drops automatically in larger quantities.

Klüber Klüberbio LG 39-700 N

Eco-compatible operating lubricant for open gear drives

Application Klüber Klüberbio LG 39-700 N

Klüberbio LG 39-700 N was developed for the lubrication of open gear drives and rack-and-pinion drives as well as for sliding surfaces with high surface pressure. The product can be used in maritime applications requiring good eco-compatibility, a good anticorrosive effect and/or high load-carrying capacity, e.g. in open anchor winch drives, rack and pinions in jack-up lifting systems, slow-moving plain bearings, stern roller bearings on AHTS vessels or rudder systems.

Shell Naturelle Grease S5 V120P 2 

Advanced Biodegradeable Extreme Pressure Grease

Shell Naturelle Grease S5 V120P 2 main applications:

• Heavy duty bearings and general industrial lubrication
• Operation over the temperature range -20° C to 100° C for bearings operating at 75% of the maximum rated speed
  (Can withstand up to 120° C intermittently).
  
  

Shell Naturelle Grease S5 V120P is a biodegradeable grease for use in applications where environmental acceptability is required. Shell Naturelle Grease S5 V120P is base upon a lithium hydroxystearate soap thickener, is free from lead & sodium nitrite and is fortified with extreme pressure, anti-oxidant, anti-wear and anti-rust additives.

Please note!! Price of Shell Naturelle Grease S5 V120P 2 drops automatically in larger quantities.

Klüber Klüberbio LG 39-701 N

Eco-compatible operating lubricant for open gear drives

Application Klüber Klüberbio LG 39-701 N

Klüberbio LG 39-701 N was developed for the lubrication of open gear drives and rack-and-pinion drives as well as for sliding surfaces with high surface pressure. The product can be used in maritime applications requiring good eco-compatibility, a good anticorrosive effect and/or high load-carrying capacity, e.g. in open anchor winch drives, rack and pinions in jack-up lifting systems, slow-moving plain bearings, stern roller bearings on AHTS vessels or rudder systems.

Klüber Klüberbio RM 2-100

Environmentally compatible, synthetic stern tube oils

Application Klüber Klüberbio RM 2-100

Klüberbio RM 2 oils were developed for the lubrication of propeller bushes made of white metal and propeller shaft seals. Klüberbio RM 2 oils are tested and approved by all leading propeller shaft seal manufacturers. Please contact Klüber Lubrication or the seal manufacturer for technical consultation on your specific seal-lubricant combination.

Q8 Holbein Bio Plus 46 previouslyQ8 Holbein Eco 46

Applications Q8 Holbein Bio Plus 46

Hydraulic systems used in sensitive area’s for which environmentally friendly fluids are recommended.

PLANTOHYD 40 N

Environmentally compatible hydraulic and lubricating oils based on natural raw materials, type HETG according to ISO 15380, for mobile and stationary hydraulic equipment

PLANTOHYD 40 N field of applications:

PLANTOHYD 32 N resp. PLANTOHYD 40 N can be used in mobile and stationary hydraulic equipment for which an ISO VG 32 resp. ISO VG 46 hydraulic oil is recommended. The change-over guidelines according to ISO 15380 have to be observed when converting a system to PLANTOHYD N. Repair paints and paints which are not based on 2-component-systems might not be compatible with mineral oil as well as natural raw materials like PLANTOHYD N. The PLANTOHYD N products perform best at tank temperatures between 50 und 60°C. Recommended operating temperature range: -27°C to +70°C.

Please note!! Price of PLANTOHYD 40 N drops automatically in larger quantities.

Shell Naturelle S2 HF 46 previously Naturelle HF-E 46

Fully Synthetic, Biodegradable, Less-flammable Hydraulic Fluid

Shell Naturelle HF-E 46 main applications:

• Mobile / exterior hydraulic applications
• General industrial control equipment and hydraulic systems
• Environmentally sensitive areas
• Industrial operation subject to fire hazards
  

Shell Naturelle Fluid HF-E 46 is an advanced biodegradable and HFDU type less flammable hydraulic fluid for use in hydraulic and power transmission systems. Shell Naturelle Fluid HF-E 46 is readily biodegradable with a low ecotoxicity, particularly suited for use in environmentally sensitive areas and in industrial equipment operating in areas subject to fire hazards, such as in steel mills, surface mines and foundries.

Pay attention! Price of Shell Naturelle HF-E 46 drops automatically in larger quantities.

PLANTO TAC 68

PLANTO TAC 68 field of applications:

PLANTO TAC 68 was developed specially for all lubricated saw chains which are used in the toughest conditions in environmentally sensitive areas such as protected water zones, forests, tree nurseries, etc.

Shell Naturelle S2 HF 32 previously Shell Naturelle HF-E 32

Fully Synthetic, Biodegradable, Less-flammable Hydraulic Fluid

Shell Naturelle HF-E 32 main applications:

• Mobile / exterior hydraulic applications
• General industrial control equipment and hydraulic systems
• Environmentally sensitive areas
• Industrial operation subject to fire hazards
  

Shell Naturelle Fluid HF-E 32 is an advanced biodegradable and HFDU type less flammable hydraulic fluid for use in hydraulic and power transmission systems. Shell Naturelle Fluid HF-E 32 is readily biodegradable with a low ecotoxicity, particularly suited for use in environmentally sensitive areas and in industrial equipment operating in areas subject to fire hazards, such as in steel mills, surface mines and foundries.

Pay attention! Price of Shell Naturelle HF-E 32 drops automatically in larger quantities.

TOTAL BIOHYDRAN TMP 46

Biodegradable Hydraulic Fluid complying with the European Ecolabel criteria.

Applications TOTAL BIOHYDRAN TMP 46

• BIOHYDRAN TMP is a biodagradable synthetic hydraulic fluid offering good lubricating properties. It was designed for demanding hydraulic systems requiring hydraulic fluids with reenforced anti-wear properties
• BIOHYDRAN TMP is recommended for use when incidental spillage in environmentally sensitive areas can occur, eg : forestry works, navigation, off-shore, water catchment areas, ski resorts, hydroelectric stations etc

Your advantage! Price of TOTAL BIOHYDRAN TMP 46 drops automatically in larger quantities.

Total Biomerkan RS

Biodegradable water resistant calcium grease.

Applications Total Biomerkan RS

• BioMERKAN RS is pre-eminently designed for the lubrication of slow rotating slide bearings and articulations used in marine applications such as stern tubes, and ‘industrial’ applications such as conveyor belts
• BioMERKAN RS has been developed for loss lubrication in environmental sensitive areas, is also suitable as a non “EP” general purpose grease in a wide range of ‘outdoor’ applications where water is in frequent contact with the grease.
• Always avoid contamination of the grease by dust and/or dirt when applying. Preferably use a pneumatic pump system.

TOTAL FINASOL BIO

Multipurpose biotechnologic emulsifiable degreaser

Applications TOTAL FINASOL BIO

• Cleaning of vehicle engines and chassis
• Cleaning of cement or tiled floors in workshops, industrial plants, car parks, garages and service stations
• Cleaning of lubrication bays and pits
• Cleaning of oil-fired boiler house floors and petroleum product storage areas
• Cleaning of public works engines
• Cleaning of road and maritim engines
• Removing of tar, gasoline, diesel, kerosene, domestic fuel or oil fuel.
• Cleaning of machine tools and machine parts
• Removing of anti-rust protection coatings
• Cleaning of brushes and tools used for painting

Your advantage! Price of TOTAL FINASOL BIO drops automatically in larger quantities.

TOTAL BIOHYDRAN TMP 68

Biodegradable Hydraulic Fluid complying with the European Ecolabel criteria.

Applications TOTAL BIOHYDRAN TMP 68

• BIOHYDRAN TMP is a biodagradable synthetic hydraulic fluid offering good lubricating properties. It was designed for demanding hydraulic systems requiring hydraulic fluids with reenforced anti-wear properties
• BIOHYDRAN TMP is recommended for use when incidental spillage in environmentally sensitive areas can occur, eg : forestry works, navigation, off-shore, water catchment areas, ski resorts, hydroelectric stations etc

Your advantage! Price of TOTAL BIOHYDRAN TMP 68 drops automatically in larger quantities.

Q8 Holbein HP SE BIO 46

Eco-friendly saturated synthetic ester-based hydraulic oil

Applications Q8 Holbein HP SE BIO 46

Q8 Holbein HP SE Bio 46 is perfect for applications in rough hydraulic systems in environmental sensitive area’s and all temperatures like agriculture, forestry, water works, marine and construction.

Your advantage! Price of Q8 Holbein HP SE BIO 46 drops automatically in larger quantities.

TOTAL BIOHYDRAN TMP 32

Biodegradable Hydraulic Fluid complying with the European Ecolabel criteria.

Applications TOTAL BIOHYDRAN TMP 32

• BIOHYDRAN TMP is a biodagradable synthetic hydraulic fluid offering good lubricating properties. It was designed for demanding hydraulic systems requiring hydraulic fluids with reenforced anti-wear properties
• BIOHYDRAN TMP is recommended for use when incidental spillage in environmentally sensitive areas can occur, eg : forestry works, navigation, off-shore, water catchment areas, ski resorts, hydroelectric stations etc

Your advantage! Price of TOTAL BIOHYDRAN TMP 32 drops automatically in larger quantities.

CASTROL Performance Bio HE 32

Biodegradable hydraulic oil

Application CASTROL Performance Bio HE 32

Performance Bio HE is intended for use in all hydraulic systems, where there is a risk that leaking fluid will contaminate ground water and the sewage system, such as in earthmoving machinery, refuse collection lorries, agricultural and forestry machinery, rail vehicles, presses and wrapping machines. Thanks to the carefully selected base oil, it can be used up to +120 °C. The viscosity index has a high value which means that the viscosity of the product depends relatively little on the temperature. The environmentally friendly nature, measured according to the CEC L-33-A-93 test is >90%. Performance Bio HE is not miscible with water. Performance Bio HE is miscible with hydraulic fluids based on mineral oil and vegetable or synthetic esters. Nevertheless, when switching from mineral oil based hydraulic fluids to Performance Bio HE it is recommended to empty the system completely as mixing with mineral oil reduces biodegradability and may lead to foaming problems. Performance Bio HE meets the requirements according to VDMA 24568 for a HEES (Hydraulic Environmental Ester Synthetic).

CASTROL Performance Bio HE 46

Biodegradable hydraulic oil

Application CASTROL Performance Bio HE 46

Performance Bio HE 46 is intended for use in all hydraulic systems, where there is a risk that leaking fluid will contaminate ground water and the sewage system, such as in earthmoving machinery, refuse collection lorries, agricultural and forestry machinery, rail vehicles, presses and wrapping machines. Thanks to the carefully selected base oil, it can be used up to +120 °C. The viscosity index has a high value which means that the viscosity of the product depends relatively little on the temperature. The environmentally friendly nature, measured according to the CEC L-33-A-93 test is >90%. Performance Bio HE46 is not miscible with water. Performance Bio HE 46 is miscible with hydraulic fluids based on mineral oil and vegetable or synthetic esters. Nevertheless, when switching from mineral oil based hydraulic fluids to Performance Bio HE 46 it is recommended to empty the system completely as mixing with mineral oil reduces biodegradability and may lead to foaming problems. Performance Bio HE 46 meets the requirements according to VDMA 24568 for a HEES (Hydraulic Environmental Ester Synthetic).

Shell Naturelle S2 HF 15 previously Shell Naturelle HF-E 15

Fully synthetic, environmentally friendly biodegradable hydraulic oil

Main uses of Shell Naturelle HF-E 15 are:

• + Mobile /hydraulic applications outside
• + General industrial control systems and hydraulics
• + Ecologically sensitive areas, with Ecolabel
  
  

Shell Naturelle HF-E 15 is an advanced hydraulic fluid, both biodegradable and low-flammable type HFDU for use in hydraulic systems and hydraulic power transmissions. Shell Naturelle HF-E 15 has a high degree of biodegradability and is particularly suitable for use in ecologically sensitive and industrial areas such as steel plants, mines and foundries. The composition of biodegradable synthetic esters and ashless additives ensures that Shell Naturelle Fluid HF-E 15 has excellent lubricity and is environmentally friendly.

Please note! Price Shell Naturelle HF-E 15 drops automatically with larger quantities.