Shell Gadinia S3 40

Shell Gadinia AL 40 Main Applications

Shell Gadinia S3 40 is a high quality, multifunctional diesel engine lubricant which has been specially designed for the most severe service main propulsion and auxiliary marine trunk piston engines burning distillate, hybrid and bio-fuels with a sulphur content up to 1%. The newly formulated Shell Gadinia S3 40 has also been optimised for use in non-engine applications which are typically found on board such as gearboxes, clutches and stern tubes.

Specifications, Approvals & Recommendations Shell Gadinia AL 40

· Siemens/Flender · MTU CAT I · Renk/Rheiner · Yanmar · Daihatsu · Simplex B&V · Reintjes

Shell Gadinia AL 40 Performance, Features & Benefits:

• + Extended oil life
• + Engine protection
• + System efficiency

Performance, Features & Benefits of Shell Gadinia AL 40

+ Extended oil life

Shell Gadinia S3 40 offers excellent resistance to oxidation and thermal degradation so it can offer longer oil life, especially in high-stress engines under severe operating conditions.

+ Engine protection

Shell Gadinia S3 40 can help to extend engine life by reducing deposit formation in the piston ring belt and cylinder liners reducing the risk of ring sticking and breakage. In addition, the new formulation has been designed to minimise lacquer formation resulting in greater control of oil consumption and reduced operating costs.

+ System efficiency

Shell Gadinia S3 40 has been designed to have greater tolerance to engine overload or poor combustion. It will also offer a greater safety margin to protect highly loaded bearings, in the event of water contamination, due to Shell Gadinia S3 40’s improved water tolerance and separation in separators.
Shell Gadinia S3 40 is also approved for use in a number of non-engine applications such as gearboxes, clutches and stern tubes – this can help smaller operators to minimise inventory by removing the requirement to keep multiple specialist lubricants on board

If you have any questions, please contact OilOnline Technical Helpdesk

Health, Safety & Environment of Shell Gadinia AL 40

Health and Safety

Shell Gadinia AL 40 is unlikely to present any significant health or safety hazard when properly used in the recommended application and good standards of personal hygiene are maintained. Avoid contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and water.
Guidance on Health and Safety is available on the appropriate Material Safety Data Sheet, which can be obtained from http://www.epc.shell.com/

Protect the Environment

Take used Shell Gadinia AL 40 to an authorised collection point. Do not discharge into drains, soil or water.

Typical Physical Characteristics of Shell Gadinia AL 40

Is Shell Gadinia 40 the same as Shell Gadinia S3 40?

Shell Gadinia S3 40 is the direct successor of Shell Gadinia 40. The performance of Shell Gadinia S3 40 is the same as Corena P only a name change has occurred.

Can I use Shell Gadinia S3 40 in my reverse gear / thrust reverser?

Yes, this is not a problem if a SAE 40 is prescribed. The advantage is that you can use the same product for both the engine oil and the gearbox / thrust reverser.

Where can I buy Shell Gadinia S3 40?

OilOnline is the largest online lubricant webshop with exclusively world-renowned brands including Shell Gadinia S3 40. Customers of OilOnline appreciate the convenience and time saving that they can buy lubricants online 24/7 at a competitive price. No questions asked: Knowledge is our strength! www.oilonline.store