7 warehouses in Europe
AeroShell Fluid
-
Shell Aeroshell Fluid 41 UN 3082, klasse 9
Quick orderingMore infoAeroshell Fluid 41
AeroShell Fluid 41 is a mineral hydraulic oil manufactured to a very high level of cleanliness, and possesses improved fluid properties
Application Aeroshell Fluid 41
AeroShell Fluid 41 is intended as an hydraulic fluid in all modern aircraft applications requiring a mineral hydraulic fluid. AeroShell Fluid 41 is particularly recommended where use of a "superclean" fluid can contribute to improvements in component reliability, and can be used in aircraft systems operating unpressurised between –54°C to 90°C and pressurised between –54°C to 135°C. AeroShell Fluid 41 should be used in systems with synthetic rubber components and must not be used in systems incorporating natural rubber. AeroShell Fluid 41 is compatible with AeroShell Fluids 4, 31, 51, 61 and 71 and SSF/LGF. Chlorinated solvents should not be used for cleaning hydraulic components which use AeroShell Fluid 41. The residual solvent contaminates the hydraulic fluid and may lead to corrosion. Due to its properties, it is also used in several industrial applications.
Show moreStarting at: € 10,58 / L -
Shell Aeroshell Fluid 31
Quick orderingMore infoAeroshell Fluid 31
AeroShell Fluid 31 is a synthetic hydrocarbon based aircraft hydraulic fluid with greatly improved fire resistance characteristics when compared with conventional petroleum products
Application Aeroshell Fluid 31
AeroShell Fluid 31 is recommended for use in aircraft, ordnance, and missile systems operating from –400 C to +2050 C . This fluid should be considered for use in auto pilots, shock absorbers, brakes, flight control systems, hydraulic servo-controlled systems and other systems using synthetic elastomer seals. An increasing number of aircraft manufacturers now recommend use of this type of fluid in aircraft hydraulic systems in preference to mineral hydraulic oils. This move has been prompted by need to use fluids with better fire resistant properties. AeroShell Fluid 31 is also approved for use in the Honeywell (formerly Garrett) cooling turbine (cabin air compressors). Increasingly this type of hydraulic fluid is being adopted for use in hydraulic systems of military aircraft in place of mineral hydraulic fluids. AeroShell Fluid 31 is a synthetic hydrocarbon oil and should not be used in contact with incompatible seal materials. AeroShell Fluid 31 is compatible with AeroShell Fluids 4, 41, 51, 61 and 71 and can be used in systems designed to operate with MIL-PRF-5606, MIL-PRF-6083, MIL-PRF-87257 and MILPRF-46170 fluids. Chlorinated solvents should not be used for cleaning hydraulic components which use AeroShell Fluid 31. The residual solvent contaminates the hydraulic fluid and may lead to corrosion.
Show more€ 18,89 / L -
Shell Aeroshell Fluid S.8350
Quick orderingMore infoAeroshell Fluid S.8350
AeroShell Fluid S.8350 is an SAE 90 extreme pressure gearbox oil.
Application Aeroshell Fluid S.8350
AeroShell Fluid S.8350 is used for helicopter rotor gears, drive-shafts and pitch control mechanisms and wherever high loads and slow speeds in gears require the use of a 90 EP gear oil. AeroShell Fluid S.8350 is approved for use in various Westland helicopter gearboxes. AeroShell Fluid S.8350 must not be used in engines
Show more€ 21,76 / L -
Shell Aeroshell Fluid 2XN
Quick orderingMore infoAeroshell Fluid 2XN
Corrosion inhibited mineral oil for aircraft engine preservation
Application Aeroshell Fluid 2XN
AeroShell Fluid 2XN is primarily used as an ingredient of AeroShell Fluid 2F, but can be used undiluted to provide additional protection for piston engines after run-out on AeroShell Fluid 2F, by spraying exhaust ports, rocker arms, accessories. For aircraft gas turbine engines a mixture of one part of AeroShell Fluid 2XN to three parts of AeroShell Turbine Oil 2 is required. Detailed instructions for inhibiting turbines are given in specification MIL-E-5607F. The ashless anti-corrosion additive package together with the highly refined mineral base oil protects the engine by minimising the effects of humidity and neutralising the acidic components of engine oil oxidation and, in piston engines, the combustion byproducts as well.
Show more€ 25,25 / L -
Shell Aeroshell Fluid 3
Quick orderingMore infoAeroshell Fluid 3
Mineral lubricating oil for general purpose aircraft use
Application Aeroshell Fluid 3
AeroShell Fluid 3 is recommended for general lubrication of aircraft parts that require a light oil, e.g. hinges, pivot joints, shaft joints, linkage pins and bearings, pulleys, cables, camera mechanisms, radio and radar gear and instruments. AeroShell Fluid 3 is normally applied by means of an oil can or brush. For this reason it is also described as ‘an oilcan lubricant. Operating temperature range of AeroShell Fluid 3 is -54°C to +121°C. For high temperature applications where no provision is made for frequent re-lubrication the synthetic oil, AeroShell Fluid 12, should be used in place of the mineral oil, AeroShell Fluid 3; however in this case care should be taken to ensure that there is no incompatibility between AeroShell Fluid 12 and seals, paints etc.
Show more€ 21,84 / L -
Shell Aeroshell Fluid 12
Quick orderingMore infoAeroshell Fluid 12
Synthetic lubricating oil for general purpose aircraft use
Application Aeroshell Fluid 12
AeroShell Fluid 12 is used for general aircraft lubrication as well as for aircraft gyro instrument gimbal bearings, separately lubricated high speed turbines and compressors, aircraft air cycle equipment and electronic equipment. AeroShell Fluid 12 is particularly suitable for use when an oil with a low evaporation rate is required at high and low temperatures. AeroShell Fluid 12 is a synthetic oil and it should not be used in contact with incompatible seal materials such as neoprene or natural rubber. Suitable seal materials include Fluorocarbon (Viton). AeroShell Fluid 12 may also affect certain paints and plastics. It is recommended that components are evaluated for compatibility if there is any question.
Show more€ 40,41 / L
Our customers value us
"We like your site, it shows that you are experts in lubricants!"
-- Ian Adair
"You deliver quicker than our previous UK supplier!"
-- Cris Scullion
"Surprise to us!
We paid to much in the past"
-- Stuart Wyatt
Our customers value us
"We like your site, it shows that you are experts in lubricants!"
-- Ian Adair
"You deliver quicker than our previous UK supplier!"
-- Cris Scullion
"Surprise to us!
We paid to much in the past"
-- Stuart Wyatt