Castrol

Castrol A747 Racing Oil

Synthetic Oil for Road Racing 2-Stroke Engines

The main applications of Castrol A747 Racing Oil are:

• + Solely intended for racing purposes
• + Not suitable for Autolube systems

Castrol A747 Racing is a low ash, synthetic lubricant specially developed for use in multi-cylinder, water-cooled 2-stroke engines of road racing machines, where control of deposits in the combustion chamber is essential. Castrol A747 ensures perfect lubrication and contains special additives to prevent throttle slides from sticking when used in humid weather conditions, and can be used in a fuel/oil ratio of up to 40:1.

CASTROL Tribol GR 100-1 PD

High Performance Bearing Greases

Application CASTROL Tribol GR 100-1 PD

The Tribol GR 100 PD Range can be used for long term lubrication even under the most difficult operating conditions such as extreme pressure, vibrations, shock loads and a wide temperature range (-35°C to 140°C / -31°F to 284°F) in highly loaded rolling and sliding bearings. Typical applications include bearings of spinning and grinding spindles, gear motors exposed to shock loads, screening / wood shaping machines and bearing surfaces of printing plates. These greases are also suitable for bearings with a rotating outer ring and undergoing high stresses due to centrifugal load. Examples are spreader rolls, roll neck bearings in steel mills, and bearings with changing rotational directions or slewing movements. They are also used in curved teeth couplings and centralised lubricating systems. Tribol GR 100-0 PD and 100-00 PD can be used as semi-fluid grease lubricants in gears such as flange, drum-type and worm gears. These two products are also suitable for use in gears without oil-tight enclosures, gear wheels and rolling bearings with a grease reservoir

Your advantage! Price of CASTROL Tribol GR 100-1 PD drops automatically in larger quantities.

CASTROL Tribol GR 100-2 PD

High Performance Bearing Greases

Application CASTROL Tribol GR 100-2 PD

The Tribol GR 100 PD Range can be used for long term lubrication even under the most difficult operating conditions such as extreme pressure, vibrations, shock loads and a wide temperature range (-35°C to 140°C / -31°F to 284°F) in highly loaded rolling and sliding bearings. Typical applications include bearings of spinning and grinding spindles, gear motors exposed to shock loads, screening / wood shaping machines and bearing surfaces of printing plates. These greases are also suitable for bearings with a rotating outer ring and undergoing high stresses due to centrifugal load. Examples are spreader rolls, roll neck bearings in steel mills, and bearings with changing rotational directions or slewing movements. They are also used in curved teeth couplings and centralised lubricating systems. Tribol GR 100-0 PD and 100-00 PD can be used as semi-fluid grease lubricants in gears such as flange, drum-type and worm gears. These two products are also suitable for use in gears without oil-tight enclosures, gear wheels and rolling bearings with a grease reservoir

Your advantage! Price of CASTROL Tribol GR 100-2 PD drops automatically in larger quantities.

CASTROL SPHEEROL EPL 2

Bearing grease

Application CASTROL SPHEEROL EPL 2

The Spheerol EPL 2 comprises general purpose greases designed for plant wide lubrication. These greases provide good protection against rust and corrosion as well as resistance to water wash-out; which makes them particularly suitable for equipment where moist or wet conditions are common. The good levels of resistance to both corrosion and water wash-out, which makes this product suitable for equipment where moist or wet conditions are common.

Your advantage! Price of CASTROL SPHEEROL EPL 2 drops automatically in larger quantities.

CASTROL High Temperature Grease

Multipurpose High Temperature Grease

Application CASTROL High Temperature Grease

Castrol High Temperature Grease is intended for use in a wide range of plain and rolling element bearings within both the Automotive and Industrial markets, especially targeting those applications where upper operating temperatures are likely to exceed the limits of conventional, lithium thickened greases. The excellent thermal and mechanical stability of Castrol High Temperature Grease make it particularly suitable for use in automotive bearing applications where rotational speeds may be higher or prolonged heavy braking may generate higher than normal hub temperatures. Specific examples may include cars fitted with disc brakes or commercial vehicles such as trucks or buses. Castrol High Temperature Grease also offers good resistance to water and corrosion as well as very good load carrying performance making it suitable for general vehicle chassis lubrication or bearings on off-road construction vehicles where greater extremes of pressure may be prevalent.

Castrol Power RS 2T

is a state-of-the-art fully synthetic 2-stroke engine oil for modern high-load 2T engines.

The powerful protective formula of Castrol Power RS 2T is designed for maximum performance with superior protection and high engine cleanliness at the same time. This formula was to apply a very strong, ever-changing and protective lubricant film to all major engine components. That's why your engine can take full advantage of Castrol Power RS 2T. Has high protective properties and promotes complete combustion.

Castrol Power RS 2T is suitable for both Japanese and European 2-stroke racing and dirt bikes, such as Aprilia, Honda, Suzuki, Kawasaki, KTM and Yamaha with the most powerful engines.

Specifications:

• API TC
• JASO FD
• ISO EGD

Check here if Castrol Power RS 2T 2-stroke engine oil is the most suitable for your engine.

Buy a full box 12x & 1L and save on the litre price!

Castrol Power RS 4T 10W-40

Castrol Power RS Racing with Trizone Technology™ is a premium-quality, semi-synthetic 4-stroke motorcycle oil.

Its anti-friction formulation is proven to increase acceleration compared to conventional motorcycle oils.

• Race-derived technology for maximum engine acceleration.
• Extreme high-temperature air-cooled and water-cooled engine performance.
• Castrol Power RS 4T 10W-40 has an excellent shear stability to prevent viscosity breakdown.
• Superior high-speed engine protection to help extend engine life.
• Outstanding oil consumption and control, gearshift quality and wet-clutch performance.

• API SERVICE: Exceeds API SN
• JASO (T903): JASO MA-2
• VISCOSITY: SAE 10W-40

Castrol Alpha EP 100

Industrial Gear oil

Appliciation Castrol Alpha EP 100

The Castrol Alpha EP range offers good gear performance for most types of gears. The Castrol Alpha EP range is also suitable for mechanical-hydrodynamic transmissions, turbo clutches and hydraulics

If you have any questions, please contact OilOnline Technical Helpdesk

Castrol EDGE FST 5W-40 Turbo Diesel

Properties

Castrol EDGE 5W-40 Turbo Diesel  provides outstanding wear protection in high performance engines designed to run at their optimum level on lower viscosity oils. Castrol EDGE 5W-40 Turbo Diesel should be used in engines where maximum efficiency and protection is demanded. Castrol EDGE 5W-40 gives you the confidence to demand maximum engine performance from today’s performance engines that operate at higher temperatures with tighter tolerances, requiring lower viscosity oils. Castrol uses Titanium FST technology. 

Castrol EDGE 5W-40 SN is proven in tests to deliver outstanding oil strength. The exceptional characteristics of Castrol EDGE 5W-40 SN ensure that all engine components, from the valve train to the bearings are fully lubricated to provide optimum engine performance and protection.

Specificarions/ Approvals Castrol EDGE 5W-40 Turbo Diesel is suitable where the following requirements are called for:

• ACEA C3 High performance shear stable petrol/diesel engine oil
• API SN, (SM, SL, SJ, SH and all superseded classifications) • Diesel : CF
• VW 502 00 / 505 00 / 505 01
• MB – Approval 229.31 / 229.51 / 226.5
• RN 0710 / RN 0700
• Dexos 2®, GM-LL-A-025 / GM-LL-B-025, GB2D0717082  

Castrol Magnatec 10W-40 A3/B4

Properties

Semi synthetic motor oil.

Castrol Magnatec 10W-40 A3/B4 is suitable for use in Automotive petrol and diesel engines where the manufacturer recommends an API SL/CF, ACEA A3/B4, A3/B3 or earlier specification 10W-40 lubricant.

Approvals

Castrol Magnatec 10W-40 A3/B4 is also approved for use in VW group vehicles that require a VW 501 01 / 505 00 specification 10W-40 lubricant.

Mercedes vehicles that require an MB-Approval 226.5/229.1 10W-40 lubricant.

Castrol Alpha EP 150

Industrial Gear oil

Appliciation Castrol Alpha EP 150

The Castrol Alpha EP range offers good gear performance for most types of gears. The Castrol Alpha EP range is also suitable for mechanical-hydrodynamic transmissions, turbo clutches and hydraulics

If you have any questions, please contact OilOnline Technical Helpdesk

Castrol Transmax ATF DX III Multivehicle

Automatic Transmission Fluid

Castrol Edge Professional LongLife III 5W30 has been replaced by Edge 5W30 LL.

Castrol Edge Professional LongLife III 5W30 was co-engineerd with Volkswagen, Audi, Seat, and Skoda. In the meantime things have changed and this product is no longer produced and delivered.

Our advice is therefore in favour of Volkswagen, Audi, Seat, and Skoda VW 504.00 & VW 507.00, Mercedes, specification MB 229.31 / 229.51 and Porsche specification C30 

Castrol Edge 5W-30 LL

You can place your order for Castrol Edge 5W30 LL directly above:

Castrol Edge Titanium FST 5W-30 LL (Longlife) New Hyspec

Application

Castrol EDGE 5W-30 LL (Longlife) is suitable for use in automobile, gasoline and diesel engines where the manufacturer recommends an ACEA C3 specification 5W-30 lubricant. Castrol EDGE 5W30 LL is approved for use in vehicles that require a VW 504.00 / VW 507.00, Porsche C30 or MB-Approval MB 229.31/ MB 229.51 5W-30 lubricant.

Castrol EDGE 5W30 LL:

• Maximises short and long-term engine performance 
• Castrol EDGE 5W30 LL reduces engine deposits to help maximise engine response 
• Sustains maximum performance even when under pressure 
• Independently proven to Improve engine efficiency 
• Castrol EDGE 5W30 LL delivers unsurpassed levels of protection across a variety of driving conditions and temperatures

Castrol Transmax Agri MP 15W-40 Previous Castrol Vanellus Agri Universal 15w40

Multi-functional tractor oil

CASTROL Transmax Agri MP Plus 10W-40

Super universal tractor oil

Your advantage! Price of CASTROL Transmax Agri MP Plus 10W-40 drops automatically in larger quantities.

Castrol Alpha EP 320

Industrial Gear oil

Appliciation Castrol Alpha EP 320

The Castrol Alpha EP range offers good gear performance for most types of gears. The Castrol Alpha EP range is also suitable for mechanical-hydrodynamic transmissions, turbo clutches and hydraulics

If you have any questions, please contact OilOnline Technical Helpdesk

CASTROL Transmax Agri Trans AS 80W

Anti-squawk transmission fluid

Your advantage! Price of CASTROL Transmax Agri Trans AS 80W drops automatically in larger quantities.

CASTROL Transmax Manual FE 75W previously Syntrans FE 75W

Fuel Efficient Manual Transmission Fluid

Castrol Magnatec 5W-40 C3

Properties

Castrol Magnatec 5W-40 C3 is suitable for use in automotive gasoline and diesel engines where the manufacturer recommends an ACEA C3, API SN/CF or earlier specification.

5W-40 lubricant. Castrol Magnatec 5W-40 C3 is approved for use in a vehicles from a wide range of manufacturers, please refer to the specifications section and your vehicle handbook.

Castrol Magnatec 5W-40 C3 has been specially formulated to deliver outstanding protection for the latest engines fitted with after treatment devices such as diesel particulate filters and 3 way catalysts

Approvals

Castrol Magnatec 5W-40 C3 is approved to *GM dexos2®: supersedes GM-LL-B-025 and GM-LL-A-025