7 warehouses in Europe
Castrol Alphasyn PG 460
97% supplied in 5 working days
Shipping costs for all EU countries are calculated at checkout.
VAT number required
during checkout
Pay online or by invoice (within 30 days)
CASTROL Alphasyn PG 460
Synthetic gear oils
Application CASTROL Alphasyn PG 460
Alphasyn PG gear oils are primarily intended for use in worm reduction gear boxes, where the low coefficient of friction of the PAG base fluid improves efficiency and consequently reduces power consumption and operating temperatures. This is particularly important in applications where sliding contact is high. The use of a PAG base stock provides inherently high Viscosity Index (VI) and low pour points making these products suitable for use over a wide temperature range. Alphasyn PG meets the requirements of most OEM’s that allow the use of PAG based gear oils.
Your advantage! Price of CASTROL Alphasyn PG 460 drops automatically in larger quantities.
Performance, Features & Benefits of CASTROL Alphasyn PG 460 are:
- Low coefficient of friction reduces energy consumption and lowers operating temperatures, this leads to longer oil life.
- Good thermal and oxidative stability provides reliable operation and extended operating life when compared to mineral oil based products.
- Inherently high VI makes the product suitable for operations over a wide temperature range.
- High load carrying capacity and good wear protection reduces maintenance.
If you have any questions, please contact OilOnline Technical Helpdesk
Product Description CASTROL Alphasyn PG 460
The Castrol Alphasyn™ PG gear oil range of synthetic lubricants are based on polyalkyleneglycol (PAG) fluids enhanced with antioxidants, rust inhibitors and Extreme Pressure (EP) additives of high thermal stability.
Typical Characteristics
| Product specifications : | Castrol Alphasyn PG 460 | |
| Density @ 15°C / 59°F kg/m³ | ISO 12185 / ASTM D4052 |
1060 |
| Kinematic Viscosity @ 40°C /104°F mm²/s | ISO 3104 / ASTM D 445 | 460 |
| Kinematic Viscosity @ 100°C /212°F mm²/s | ISO 3104 / ASTM D 445 | 80 |
| Viscosity Index | ISO 2909 / ASTM D2270 | 255 |
| Pour Point °C/°F | ISO 3016 / ASTM D97 | -36/- 32.8 |
| Flash Point - closed cup method °C/°F | ISO 2719 / ASTM D93 | 210/410 |
| Foam Sequence I - tendency / stability ml/ml | ISO 6247 / ASTM D892 | 10/0 |
| Rust test - distilled water (24 hrs) | ISO 7120 / ASTM D665A | Pass |
| Timken OK Load test kg/lb | ASTM D2782 | 38.6/85 |
| FZG Gear Scuffing test - A/8.3/90 Failure Load Stage |
ISO 14635-1 | >12 |
Additional Information
Normal industrial paints are not compatible with these lubricants. Gearboxes should be left unpainted internally, or alternatively should be painted with two component coatings such as epoxy resins. Care must be taken that seal materials are compatible with these lubricants. The recommended materials are nitrile rubber (NBR), silicone (VMQ), fluoro-silicone rubber (FMQ), and fluoroelastomers (FKM). Incompatible materials are likely to shrink or swell, thus causing either severe leakage or seizure of the seal. These products are not miscible with mineral oils.
Satisfied customers:
Quality brands only
genuine packages
Save costs
take control of your costs
save time and money
Global Deliveries
sea containers
air freight worldwide
You may also be interested in
-
![KlKlübersynth GH 6-460]()
Klübersynth GH 6-460Starting at: € 20,30 / L -
![Mobil Glygoyle 460]()
Mobil Glygoyle 460Starting at: € 9,90 / L -
![Fuchs RENOLIN PG 460]()
Fuchs RENOLIN PG 460€ 13,36 / L -
![Shell Omala S4 WE 460]()
Shell Omala S4 WE 460Starting at: € 6,94 / L -
![Total Carter SG 460]()
Total Carter SG 460€ 8,31 / L
