Castrol Perfecto HTS

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Your benefit: pallet advantage from 2 barrels

97% supplied in 5 working days

Shipping Rate

No VAT within the EU

Pay online or by invoice (within 30 days)

Overview

Castrol Perfecto HTS 16

Synthetic heat transfer fluid

Application Castrol Perfecto HTS 16

Perfecto HTS 16 is suitable for heat transfer systems without pressure operating in liquid phase with bulk temperatures up to 350°C, where the film temperature may not exceed 370°C. In order to extend the economic life of the liquid, the temperature of the expansion vessel must be kept below 50°C. The temperature of the expansion vessel must be kept at a maximum of 370°C. At higher temperatures it is advisable to use a nitrogen blanket. Detailed information can be found in the brochure which contains data on specific heat and thermal conductivity, among other things.

Your advantage! Price of Castrol Perfecto HTS 16 drops automatically in larger quantities.

Details

Performance, Features & Benefits of Castrol Perfecto HTS 16 are:

Perfecto HTS 16 is a special synthetic heat transport vehicle based on a synthetically manufactured hydrocarbon of the Diaryl Alkyl type. This non-aggressive, almost odourless liquid has the following properties:

Excellent thermal stability (long service life)
High thermal conductivity
High specific heat
High resistance to ageing (oxidation)
Strong anti-corrosion properties
Good flow properties
High permissible bulk temperature (350°C).

If you have any questions, please contact OilOnline Technical Helpdesk

Desciption Castrol Perfecto HTS 16

PerfectoTM HTS 16 is a synthetic heat transfer fluid based on Diaryl Alkyl, for high bulk temperatures. Its thermal stability is higher than that of mineral oil and can therefore be used at higher temperatures up to 350°C. Perfecto HTS 16 offers the advantage of low vapour pressure, a high heat capacity and good thermal conductivity.

Guidelines for use

Before filling a system, it must be rinsed with Perfecto HTS 16. Do not use any water. Before commissioning, it must undergo a pressure test as a check for paint covers. When warming up the system, careful ventilation is required to remove all air and moisture from the system.

Health, safety and environment

A separate Safety Data Sheet is available for these aspects with specific details on risks, precautionary and first aid measures. It also describes the potential effects of contamination of the environment and includes instructions for disposal of finished product. Please read these instructions before use to ensure that this product is handled responsibly.

Typical Characteristics

Product specifications :		Castrol Perfecto HTS 16
Density @ 15°C kg/m3	ISO 12185	1033
Flash point COC °C	IP 34	160
Auto-ignition Temperature °C	ASTM E659	385
Kinematic Viscosity @ 40°C cSt	ASTM D445	15.63
Kinematic Viscosity @ 100°C cSt	ASTM D445	2.79
Solidification point °C	ASTM D97	<-21
Specific Heat(@200°C / @350°C) kJ/kg.K		2.17 / 2.62
Thermal conductivity (@ 200°C / @ 350°C) W/m.K		0.108 / 0.089
Boiling point °C		353

Extra Informatie

Health, Safety and Environment: A separate Safety Data Sheet is available with specific details on risks, precautionary and first aid measures. It also describes the potential effects of contamination of the environment and includes instructions for disposal of finished product. Please read these instructions before use to ensure that this product is handled responsibly.

Opslag

It is advisable to store this product in a shelter. However, if it is necessary to store the drums outside, they should be placed horizontally, with the bundles below the liquid level, in order to prevent the entry of water and the erasure of inscriptions. Also, the products should not be stored at temperatures above 60°C, exposed to strong sunshine or temperatures below freezing in order to prevent a deterioration in quality.

Product Questions

Customer Questions