Castrol

CASTROL Optileb GT 320

Synthetic NSF H1 gear lubricant

Application CASTROL Optileb GT 320

For the special requirements of the food and beverage industries where there may be direct exposure of the lubricated part to the edible product or its packaging. For the lubrication of spur, angular and worm gear units. For the lubrication of gear motors in stirring machines, turners, packaging machines etc. For the lubrication of chain variators, rolling and sliding bearings, pumps and closed circulating systems.

CASTROL Optileb GT 100

Synthetic NSF H1 gear lubricant

Application CASTROL Optileb GT 100

For the special requirements of the food and beverage industries where there may be direct exposure of the lubricated part to the edible product or its packaging. For the lubrication of spur, angular and worm gear units. For the lubrication of gear motors in stirring machines, turners, packaging machines etc. For the lubrication of chain variators, rolling and sliding bearings, pumps and closed circulating systems.

CASTROL Optileb GT 220

Synthetic NSF H1 gear lubricant

Application CASTROL Optileb GT 220

For the special requirements of the food and beverage industries where there may be direct exposure of the lubricated part to the edible product or its packaging. For the lubrication of spur, angular and worm gear units. For the lubrication of gear motors in stirring machines, turners, packaging machines etc. For the lubrication of chain variators, rolling and sliding bearings, pumps and closed circulating systems.

CASTROL Spheerol™ BNS 2

High temperature bearing grease

Application CASTROL Spheerol™ BNS 2

Spheerol BNS 2 is suitable for the lubrication of bearings at high temperatures, such as soot blower bearings, in carriages for hardening, drying in tunnel ovens, also in bearings of bitumen mixing plants, cranes in foundries, etc. Spheerol BNS 2 can be used at a temperature range of -20ºC to +150ºC, and for short periods at a temperature range of up to +220ºC. Frequent re-greasing or grease change should be considered subject to application requirements.

Your advantage! Price of CASTROL Spheerol™ BNS 2 drops automatically in larger quantities.

CASTROL Optileb GT 150

Synthetic NSF H1 gear lubricant

Application CASTROL Optileb GT 150

For the special requirements of the food and beverage industries where there may be direct exposure of the lubricated part to the edible product or its packaging. For the lubrication of spur, angular and worm gear units. For the lubrication of gear motors in stirring machines, turners, packaging machines etc. For the lubrication of chain variators, rolling and sliding bearings, pumps and closed circulating systems.

CASTROL Optigear Synthetic 800/150

Synthetic Gear Oils

Application CASTROL Optigear Synthetic 800/150

The Optigear Synthetic 800 range is especially suited to reservoirs and circulation systems operating at high temperatures because of heat generated in severe service or high temperatures in the application. Optigear Synthetic 800 are intended for all types of heavily loaded gears including spur, bevel and worm gears. Although well suited for all types of gearing and bearings, the Optigear Synthetic 800 range is particularly effective in controlling wear and reducing friction between sliding surfaces. In addition, they possess a high degree of affinity for cupric metal alloys.

Your advantage! Price of CASTROL Optigear Synthetic 800/150 drops automatically in larger quantities.

CASTROL Optileb GT 460

Synthetic NSF H1 gear lubricant

Application CASTROL Optileb GT 460

For the special requirements of the food and beverage industries where there may be direct exposure of the lubricated part to the edible product or its packaging. For the lubrication of spur, angular and worm gear units. For the lubrication of gear motors in stirring machines, turners, packaging machines etc. For the lubrication of chain variators, rolling and sliding bearings, pumps and closed circulating systems.

CASTROL Optigear Synthetic 800/680

Synthetic Gear Oils

Application CASTROL Optigear Synthetic 800/680

The Optigear Synthetic 800 range is especially suited to reservoirs and circulation systems operating at high temperatures because of heat generated in severe service or high temperatures in the application. Optigear Synthetic 800 are intended for all types of heavily loaded gears including spur, bevel and worm gears. Although well suited for all types of gearing and bearings, the Optigear Synthetic 800 range is particularly effective in controlling wear and reducing friction between sliding surfaces. In addition, they possess a high degree of affinity for cupric metal alloys.

CASTROL Optigear Synthetic 800/320

Synthetic Gear Oils

Application CASTROL Optigear Synthetic 800/320

The Optigear Synthetic 800 range is especially suited to reservoirs and circulation systems operating at high temperatures because of heat generated in severe service or high temperatures in the application. Optigear Synthetic 800 are intended for all types of heavily loaded gears including spur, bevel and worm gears. Although well suited for all types of gearing and bearings, the Optigear Synthetic 800 range is particularly effective in controlling wear and reducing friction between sliding surfaces. In addition, they possess a high degree of affinity for cupric metal alloys.

CASTROL Optigear Synthetic 800/220

Synthetic Gear Oils

Application CASTROL Optigear Synthetic 800/220

The Optigear Synthetic 800 range is especially suited to reservoirs and circulation systems operating at high temperatures because of heat generated in severe service or high temperatures in the application. Optigear Synthetic 800 are intended for all types of heavily loaded gears including spur, bevel and worm gears. Although well suited for all types of gearing and bearings, the Optigear Synthetic 800 range is particularly effective in controlling wear and reducing friction between sliding surfaces. In addition, they possess a high degree of affinity for cupric metal alloys.

Your advantage! Price of CASTROL Optigear Synthetic 800/220 drops automatically in larger quantities.

CASTROL Optigear Synthetic 800/460

Synthetic Gear Oils

Application CASTROL Optigear Synthetic 800/460

The Optigear Synthetic 800 range is especially suited to reservoirs and circulation systems operating at high temperatures because of heat generated in severe service or high temperatures in the application. Optigear Synthetic 800 are intended for all types of heavily loaded gears including spur, bevel and worm gears. Although well suited for all types of gearing and bearings, the Optigear Synthetic 800 range is particularly effective in controlling wear and reducing friction between sliding surfaces. In addition, they possess a high degree of affinity for cupric metal alloys.

CASTROL BioTac MP

Environmentally responsible multipurpose EP grease

Unfortunately no longer available

We recommend this replacement Shell Naturelle Grease S2 A600P 1.5

Application CASTROL BioTac MP

BioTac MPTM has been developed primarily for use on exposed marine deck applications and combines excellent physical properties that enable resistance to both mechanical shear and water spray-off with an additive system developed to protect exposed components from corrosion, oxidation and the effects of load, friction and wear. BioTac MPTM is intended for use in a wide range of applications including plain bearings, wire ropes and open gears typically found in marine mooring and cargo winches. Furthermore, ramp door bearings, pedestal bearings and cargo hatch rollers are also examples of slow/medium speed marine deck applications for which BioTac MPTM is ideally suited. The combination of thickener and base oil technology enables BioTac MPTM to have a broad operating temperature range of between -35C and +125C.

CASTROL Optigear Synthetic 800/100

Synthetic Gear Oils

Application CASTROL Optigear Synthetic 800/100

The Optigear Synthetic 800 range is especially suited to reservoirs and circulation systems operating at high temperatures because of heat generated in severe service or high temperatures in the application. Optigear Synthetic 800 are intended for all types of heavily loaded gears including spur, bevel and worm gears. Although well suited for all types of gearing and bearings, the Optigear Synthetic 800 range is particularly effective in controlling wear and reducing friction between sliding surfaces. In addition, they possess a high degree of affinity for cupric metal alloys.

Your advantage! Price of CASTROL Optigear Synthetic 800/100 drops automatically in larger quantities.

CASTROL HYSPIN AWS 15

Anti-wear Hydraulic Oil

Application CASTROL HYSPIN AWS 15

Castrol Hyspin AWS 15 has been specially formulated to provide good anti-wear and thermal stability performance using proven additive technology. The careful blend of additives with a high quality base stock ensures that Castrol Hyspin AWS 15 has excellent hydrolytic and oxidative stability while exhibiting a minimal tendency to produce sludge and deposits.

In addition, Castrol Hyspin AWS 15 provides corrosion protection to ferrous and yellow metal components found within a hydraulic system. This range is designed for use in industrial hydraulic systems which require antiwear protection such as lightly loaded gears, variable speed units and bearings. The Castrol Hyspin AWS 15 is compatible with the most commonly used nitrile, silicone and fluropolymer seal materials

Castrol Hyspin AWS 15 is classified as follows: DIN 51502 classification - HLP ISO 6743/4 - Hydraulic Oils Type HM 22

Your advantage! Price of CASTROL HYSPIN AWS 15 drops automatically in larger quantities.

CASTROL Hyspin ZZ 32

Hydraulic oil for the highest demands

Application CASTROL Hyspin ZZ 32

The Hyspin ZZ range are formulated for applications requiring anti-wear and superior oxidation performance and are particularly suitable for hydraulic systems using vane and piston pumps where elevated operating temperatures are encountered. They are formulated for use in severely stressed systems in which high levels of anti-wear performance and/or ultra fine filtration are required. They have been proven to be resistant to the effects of ‘dieseling’ in highly stressed systems such as plastic injection moulding and fatigue testing equipment where the application leads to rapid breakdown of more conventional products. The range is fully compatible with elastomer materials commonly used for static and dynamic seals, such as nitrile, silicone and fluorinated (e.g. Viton) polymers.

Hyspin ZZ is classified as follows:

• DIN 51502 classification - HLP
• ISO 6743/4 - Hydraulic Oils Type HM

Hyspin ZZ grades meet the requirements (for appropriate viscosity grade) of:

• DIN 51524 Part 2
• Cincinnati Lamb (Milacron) P 68-69-70
• Denison (Parker Hannafin) HF-0
• US Steel 126 & 127
• Eaton (formerly Vickers) I-286-S & M-2950-S
• Bosch Rexroth RE90220

Your advantage! Price of CASTROL Hyspin ZZ 32 drops automatically in larger quantities.

CASTROL HYSPIN DSP 68

Detergent Hydraulic Oil

Application CASTROL HYSPIN DSP 68

For hydraulics operating under high pressures and temperatures and additional high requirements on the deterging properties.

Your advantage! Price of CASTROL HYSPIN DSP 68 drops automatically in larger quantities.

CASTROL HYSPIN HVI 22

High Viscosity Index anti-wear Hydraulic oils

Application CASTROL HYSPIN HVI 22

Hyspin HVI 22 oils are intended for severely stressed hydraulic systems requiring a high level of anti-wear performance and fine filtration. In addition, Hyspin HVI 22 exhibits excellent corrosion protection as well as outstanding thermal and oxidative stability. Hyspin HVI 22 has excellent hydrolytic stability and separates rapidly from water contamination.

Hyspin HVI 22 contains a shear stable additive system which helps to maintain the viscosity characteristics of the product over a wide temperature range, even during prolonged use, and imparts a very low pour point which enables the product to be used in cold environments.

Your advantage! Price of CASTROL HYSPIN HVI 22 drops automatically in larger quantities.

CASTROL HYSPIN DSP 22

Detergent Hydraulic Oil

Application CASTROL HYSPIN DSP 22

For hydraulics operating under high pressures and temperatures and additional high requirements on the deterging properties.

Your advantage! Price of CASTROL HYSPIN DSP 22 drops automatically in larger quantities.

CASTROL Radicool SF Premix

Ready to use antifreeze coolant

Application CASTROL Radicool SF Premix

The special inhibitor package used in Castrol Radicool SF Premix enables longer drain intervals with excellent protection against corrosion, cooling system blockage, overheating and freezing. It is especially suitable for use in engines employing cast iron, aluminium , copper or combinations of these metals used in modern engine designs. It is also compatible with all standard rubber hoses, gaskets and seals used within the cooling system. Castrol Radicool SF Premix possesses a longer operational life by allowing extended drain intervals of up to 5 years. Longer drain intervals mean reduced cost and less possibility of harm to the environment. Castrol Radicool SF Premix provides excellent protection against cavitation corrosion and effective water pump lubrication, reducing wear and noise. The additive technology used in Castrol Radicool SF Premix prevents the build up of calcium deposits (scale) from use of hard water, thereby reducing possibility of radiator blocking and restricted flow of coolant. This technology also improves the fluids heat transfer properties ensuring engines run at optimum temperatures. Castrol Radicool SF Premix contains a bittering agent to deter from accidental ingestion