Castrol

Castrol Alpha EP 100

Industrial Gear oil

Appliciation Castrol Alpha EP 100

The Castrol Alpha EP range offers good gear performance for most types of gears. The Castrol Alpha EP range is also suitable for mechanical-hydrodynamic transmissions, turbo clutches and hydraulics

If you have any questions, please contact OilOnline Technical Helpdesk

Castrol Edge Professional LongLife III 5W30 has been replaced by Edge 5W30 LL.

Castrol Edge Professional LongLife III 5W30 was co-engineerd with Volkswagen, Audi, Seat, and Skoda. In the meantime things have changed and this product is no longer delivered.

Our advice is therefore in favour of Volkswagen, Audi, Seat, and Skoda VW 504.00 & VW 507.00, Mercedes, specification MB 229.31 / 229.51 and Porsche specification C30 

Castrol Edge 5W-30 LL

You can place your order for Castrol Edge 5W30 LL directly above:

Castrol Edge Titanium FST 5W-30 LL (Longlife) New Hyspec

Application

Castrol EDGE 5W-30 LL (Longlife) is suitable for use in automobile, gasoline and diesel engines where the manufacturer recommends an ACEA C3 specification 5W-30 lubricant. Castrol EDGE 5W30 LL is approved for use in vehicles that require a VW 504.00 / VW 507.00, Porsche C30 or MB-Approval MB 229.31/ MB 229.51 5W-30 lubricant.

Castrol EDGE 5W30 LL:

• Maximises short and long-term engine performance 
• Castrol EDGE 5W30 LL reduces engine deposits to help maximise engine response 
• Sustains maximum performance even when under pressure 
• Independently proven to Improve engine efficiency 
• Castrol EDGE 5W30 LL delivers unsurpassed levels of protection across a variety of driving conditions and temperatures

Castrol EDGE 5W30 M LL-04

Stronger Under Pressure

Application Castrol EDGE 5W30 M LL-04

Castrol EDGE 5W30 M LL-04 is suitable for use in automotive gasoline and diesel vehicles where the manufacturer recommends an ACEA C3, API SN 5W-30 Lubricant. Castrol EDGE 5W30 M LL-04 is approved for use in BMW vehicles that require a BMW Longlife04 specification 5W-30 lubricant.

Castrol Edge 5W-30 C3

Application of Castrol EDGE 5W-30 C3

Castrol EDGE 5W-30 C3 is suitable for use in automotive gasoline and diesel engines where the manufacturer recommends an API SN, ACEA C3 or earlier specification 5W-30 lubricant. Castrol EDGE 5W-30 C3 is recommended and approved for use in vehicles from leading OEMs, please refer to the specifications section and your owners handbook.

Specifications

• ACEA C3 / API SN / CF High performance shear stable petrol/diesel engine oil
• Dexos2®
• MB 229.31 & MB 229.51
• Renault RN 0700 / RN 0710; 
• Vauxhall GM-LL-A-025; GM-LL-B-025
• GB2E0209082
• VW 502.00 / VW 505.00 / VW 505.01

Castrol Magnatec 5W-30 A5

Properties

Castrol Magnatec 5W-30 A5 is suitable for use in automotive petrol and diesel engines where the manufacturer recommends ACEA A5/B5, A1/B1 or API SN/CF ILSAC GF-4 5W-30 Lubricant.

Up to 75% of engine wear happens while your engine warms up. When the engine stops oil drains off critical engine parts, however Castrol Magnatec’s intelligent molecules don’t. They cling to the engine like a magnet providing an extra layer of protection.

Specifications/ Approvals

Castrol Magnatec 5W-30 A5 has been developed for use in Ford vehicles that require a 5W-30 lubricant that meets Ford WSS-M2C913-D, Ford WSS-M2C913-C, WSS-M2C913-B or WSS-M2C913-A.

CASTROL ALPHA SP 100 Previously Energol GR XP 100

Gear oils

Application CASTROL ALPHA SP 100

The Alpha SP range is recommended for the lubrication of industrial gear boxes using forced circulation or splash and oil bath lubrication. They may be used for the lubrication of spur and helical gears and in some lightly loaded worm type gear applications. They have very good viscosity characteristics to ensure starting torques are not excessively high in cold operating conditions. The additives are compatible with the ferrous and non-ferrous metals used in industrial gear units. The Alpha SP range is compatible with the most common types of seal materials.

Alpha SP is classified as follows: DIN Classification is CLP

Your advantage! Price of CASTROL ALPHA SP 100 drops automatically in larger quantities.

CASTROL Hyspin AWS 100

Anti-wear Hydraulic Oil

Application CASTROL Hyspin AWS 100

Hyspin AWS has been specially formulated to provide good anti-wear and thermal stability performance using proven additive technology. The careful blend of additives with a high quality base stock ensures that Hyspin AWS has excellent hydrolytic and oxidative stability while exhibiting a minimal tendency to produce sludge and deposits. In addition, Hyspin AWS provides corrosion protection to ferrous and yellow metal components found within a hydraulic system. This range is designed for use in industrial hydraulic systems which require antiwear protection such as lightly loaded gears, variable speed units and bearings. The Hyspin AWS range is compatible with the most commonly used nitrile, silicone and fluropolymer seal materials. Hyspin AWS is classified as follows: DIN 51502 classification - HLP ISO 6743/4 - Hydraulic Oils Type HM. Hyspin AWS grades meet the requirements (for appropriate viscosity grade) of: DIN 51524 Part 2; Cincinnati Lamb (Milacron) P 68-69-70; Denison (Parker Hannafin); HF-0 US Steel 126 & 127; Eaton (formerly Vickers) I-286-S & M-2950-S; MB – Approval 341.

Castrol Vecton Fuel Saver 5W-30 E7

Fuel-saving engine oil

Your advantage! Price of Castrol Vecton Fuel Saver 5W-30 E7 drops automatically in larger quantities.

CASTROL Vecton Fuel Saver 5W-30 E6/E9

Helps Maximise Performance

Application CASTROL Vecton Fuel Saver 5W-30 E6/E9

Castrol Vecton Fuel Saver 5W-30 E6/E9 is designed for better fuel economy in the latest Euro 6 diesel engines. It is also suitable for extended service intervals as recommended by many European engine manufacturers, including MercedesBenz and Volvo, and is approved for use in MAN Euro 6 engines. It can be used in low emission Euro 4 & Euro 5 European trucks and buses, especially those requiring a low SAPS lubricant and in older on-road and off-road vehicles and equipment that require this performance level.

Your advantage! Price of CASTROL Vecton Fuel Saver 5W-30 E6/E9 drops automatically in larger quantities.

CASTROL Aircol PD 100

Rotary Screw Compressor Lubricant

Application CASTROL Aircol PD 100

Aircol PD grades are ashless oils recommended for the lubrication of rotors, bearings and gears in rotary compressors, especially the oil flooded screw type with lubricant drain cycles of up to 2000 hours under normal use. Normal use in screw type compressors is defined by a maximum air discharge temperature =/< 100°C as defined by ISO 6743-3:2003. Aircol PD can be used for either normal or severe duty lubrication of reciprocating and rotary drip-feed air compressors, as defined by ISO 6743. Normal duty is described as:- discharge temperatures =/< 165°C; differential pressures =/< 2.5 MPa (25 bar); discharge pressures =/< 7.0 MPa (70 bar). Severe Duty is described as:- discharge temperatures > 165°C; differential pressures > 2.5 MPa (25 bar); discharge pressures > 7.0 MPa (70 bar). Aircol PD compressor oils exhibit low carbon forming tendencies and meet the requirements of the DIN 51506 VDL classification for reciprocating compressors having air discharge temperatures up to 220°C. Selection of the required viscosity grade should be based upon the compressor manufacturers’ recommendation. However as a general guide Aircol PD 32 and 46 are suitable for oil flooded rotary compressors, whereas Aircol PD 68 and 100 would be selected for lubricating the crankcase and cylinders of reciprocating compressors. Aircol PD 150 is recommended for sliding-vane compressors, or for reciprocating units at high ambient temperatures. The Aircol PD range is fully compatible with nitrile, silicone and fluropolymer seal materials. Aircol PD is classified as follows: DIN 51506 classification - VDL; ISO 6743/3 - DAA and DAB for reciprocating air compressors, DAG for rotary air compressors. Aircol PD meets the requirements (for appropriate viscosity grade) of major compressor manufacturers such as Atlas Copco, Champion, Sullair, Compair/Broomwade, Ingersoll-Rand, Kaeser and Bauer.

CASTROL HYSPIN HVI 100

High Viscosity Index anti-wear Hydraulic oils

Application CASTROL HYSPIN HVI 100

Hyspin HVI 100 oils are intended for severely stressed hydraulic systems requiring a high level of anti-wear performance and fine filtration. In addition, Hyspin HVI 100 exhibits excellent corrosion protection as well as outstanding thermal and oxidative stability. Hyspin HVI 100 has excellent hydrolytic stability and separates rapidly from water contamination.

Hyspin HVI 100 contains a shear stable additive system which helps to maintain the viscosity characteristics of the product over a wide temperature range, even during prolonged use, and imparts a very low pour point which enables the product to be used in cold environments.

Your advantage! Price of CASTROL HYSPIN HVI 100 drops automatically in larger quantities.

Castrol EDGE FST 10W-60

Properties

Castrol EDGE is three times stronger against viscosity breakdown than the leading synthetic and leading conventional oils.

The unique titanium technology physically changes the way oil behaves under extreme pressures doubling its film strength, preventing oil from breaking down and reducing friction to maximize engine performance.

Castrol EDGE with Fluid Titanium has twice the film strength of our previous formula based on the HFRR friction test.

Tested in 5W-30 versus all major conventional brands, Mobil1 and Mobil1 Extended Performance in the ASTM D6278 test.

Castrol EDGE is available in the following grades: 0W-20, 5W-20, 5W-30, 5W-30 A3/B4, 5W-30 C3, 5W-40, 5W-40 Turbo Diesel, 5W-50, 10W-30, 10W-40 and 10W-60.

CASTROL Optigear BM 100

High Performance Gear Oils

Application CASTROL Optigear BM 100

Optigear BM is suitable for gears and bearings operating under normal to extreme conditions. Extreme pressure additives make Optigear BM suitable where there is a need to maintain high load carrying capacity while protecting against scuffing and shock loading. Optigear BM 68 and BM 220 can also be used as slideway oils subject to a metalworking fluid compatibility check.

Your advantage! Price of CASTROL Optigear BM 100 drops automatically in larger quantities.

CASTROL Aircol SN 100

Synthetic Air Compressor Lubricant

Application CASTROL Aircol SN 100

Castrol Aircol SN compressor lubricants are formulated to cope with the severe operating conditions experienced in rotary screw, rotary vane and reciprocating air compressors operating at high compression ratios and high discharge temperatures. Under these conditions Aircol SN compressor oils offer reduced carbon forming tendencies and extended oil life when compared to mineral oils due to their much higher oxidation resistance. In reciprocating units, Aircol SN grades have up to eight times the service life of mineral oils.

CASTROL Optileb GT 100

Synthetic NSF H1 gear lubricant

Application CASTROL Optileb GT 100

For the special requirements of the food and beverage industries where there may be direct exposure of the lubricated part to the edible product or its packaging. For the lubrication of spur, angular and worm gear units. For the lubrication of gear motors in stirring machines, turners, packaging machines etc. For the lubrication of chain variators, rolling and sliding bearings, pumps and closed circulating systems.

CASTROL Optigear Synthetic 800/100

Synthetic Gear Oils

Application CASTROL Optigear Synthetic 800/100

The Optigear Synthetic 800 range is especially suited to reservoirs and circulation systems operating at high temperatures because of heat generated in severe service or high temperatures in the application. Optigear Synthetic 800 are intended for all types of heavily loaded gears including spur, bevel and worm gears. Although well suited for all types of gearing and bearings, the Optigear Synthetic 800 range is particularly effective in controlling wear and reducing friction between sliding surfaces. In addition, they possess a high degree of affinity for cupric metal alloys.

Your advantage! Price of CASTROL Optigear Synthetic 800/100 drops automatically in larger quantities.