Castrol

Castrol Power RS 4T 10W-40

Castrol Power RS Racing with Trizone Technology™ is a premium-quality, semi-synthetic 4-stroke motorcycle oil.

Its anti-friction formulation is proven to increase acceleration compared to conventional motorcycle oils.

• Race-derived technology for maximum engine acceleration.
• Extreme high-temperature air-cooled and water-cooled engine performance.
• Castrol Power RS 4T 10W-40 has an excellent shear stability to prevent viscosity breakdown.
• Superior high-speed engine protection to help extend engine life.
• Outstanding oil consumption and control, gearshift quality and wet-clutch performance.

• API SERVICE: Exceeds API SN
• JASO (T903): JASO MA-2
• VISCOSITY: SAE 10W-40

CASTROL Tribol GR 100-1 PD

High Performance Bearing Greases

Application CASTROL Tribol GR 100-1 PD

The Tribol GR 100 PD Range can be used for long term lubrication even under the most difficult operating conditions such as extreme pressure, vibrations, shock loads and a wide temperature range (-35°C to 140°C / -31°F to 284°F) in highly loaded rolling and sliding bearings. Typical applications include bearings of spinning and grinding spindles, gear motors exposed to shock loads, screening / wood shaping machines and bearing surfaces of printing plates. These greases are also suitable for bearings with a rotating outer ring and undergoing high stresses due to centrifugal load. Examples are spreader rolls, roll neck bearings in steel mills, and bearings with changing rotational directions or slewing movements. They are also used in curved teeth couplings and centralised lubricating systems. Tribol GR 100-0 PD and 100-00 PD can be used as semi-fluid grease lubricants in gears such as flange, drum-type and worm gears. These two products are also suitable for use in gears without oil-tight enclosures, gear wheels and rolling bearings with a grease reservoir

Your advantage! Price of CASTROL Tribol GR 100-1 PD drops automatically in larger quantities.

CASTROL Tribol GR 100-2 PD

High Performance Bearing Greases

Application CASTROL Tribol GR 100-2 PD

The Tribol GR 100 PD Range can be used for long term lubrication even under the most difficult operating conditions such as extreme pressure, vibrations, shock loads and a wide temperature range (-35°C to 140°C / -31°F to 284°F) in highly loaded rolling and sliding bearings. Typical applications include bearings of spinning and grinding spindles, gear motors exposed to shock loads, screening / wood shaping machines and bearing surfaces of printing plates. These greases are also suitable for bearings with a rotating outer ring and undergoing high stresses due to centrifugal load. Examples are spreader rolls, roll neck bearings in steel mills, and bearings with changing rotational directions or slewing movements. They are also used in curved teeth couplings and centralised lubricating systems. Tribol GR 100-0 PD and 100-00 PD can be used as semi-fluid grease lubricants in gears such as flange, drum-type and worm gears. These two products are also suitable for use in gears without oil-tight enclosures, gear wheels and rolling bearings with a grease reservoir

Your advantage! Price of CASTROL Tribol GR 100-2 PD drops automatically in larger quantities.

CASTROL High Temperature Grease

Multipurpose High Temperature Grease

Application CASTROL High Temperature Grease

Castrol High Temperature Grease is intended for use in a wide range of plain and rolling element bearings within both the Automotive and Industrial markets, especially targeting those applications where upper operating temperatures are likely to exceed the limits of conventional, lithium thickened greases. The excellent thermal and mechanical stability of Castrol High Temperature Grease make it particularly suitable for use in automotive bearing applications where rotational speeds may be higher or prolonged heavy braking may generate higher than normal hub temperatures. Specific examples may include cars fitted with disc brakes or commercial vehicles such as trucks or buses. Castrol High Temperature Grease also offers good resistance to water and corrosion as well as very good load carrying performance making it suitable for general vehicle chassis lubrication or bearings on off-road construction vehicles where greater extremes of pressure may be prevalent.

Castrol Magnatec 10W-40 A3/B4

Properties

Semi synthetic motor oil.

Castrol Magnatec 10W-40 A3/B4 is suitable for use in Automotive petrol and diesel engines where the manufacturer recommends an API SL/CF, ACEA A3/B4, A3/B3 or earlier specification 10W-40 lubricant.

Approvals

Castrol Magnatec 10W-40 A3/B4 is also approved for use in VW group vehicles that require a VW 501 01 / 505 00 specification 10W-40 lubricant.

Mercedes vehicles that require an MB-Approval 226.5/229.1 10W-40 lubricant.

Castrol Edge Professional LongLife III 5W30 has been replaced by Edge 5W30 LL.

Castrol Edge Professional LongLife III 5W30 was co-engineerd with Volkswagen, Audi, Seat, and Skoda. In the meantime things have changed and this product is no longer delivered.

Our advice is therefore in favour of Volkswagen, Audi, Seat, and Skoda VW 504.00 & VW 507.00, Mercedes, specification MB 229.31 / 229.51 and Porsche specification C30 

Castrol Edge 5W-30 LL

You can place your order for Castrol Edge 5W30 LL directly above:

Castrol Edge Titanium FST 5W-30 LL (Longlife) New Hyspec

Application

Castrol EDGE 5W-30 LL (Longlife) is suitable for use in automobile, gasoline and diesel engines where the manufacturer recommends an ACEA C3 specification 5W-30 lubricant. Castrol EDGE 5W30 LL is approved for use in vehicles that require a VW 504.00 / VW 507.00, Porsche C30 or MB-Approval MB 229.31/ MB 229.51 5W-30 lubricant.

Castrol EDGE 5W30 LL:

• Maximises short and long-term engine performance 
• Castrol EDGE 5W30 LL reduces engine deposits to help maximise engine response 
• Sustains maximum performance even when under pressure 
• Independently proven to Improve engine efficiency 
• Castrol EDGE 5W30 LL delivers unsurpassed levels of protection across a variety of driving conditions and temperatures

CASTROL Transmax Agri MP Plus 10W-40

Super universal tractor oil

Your advantage! Price of CASTROL Transmax Agri MP Plus 10W-40 drops automatically in larger quantities.

Castrol EDGE 5W30 M LL-04

Stronger Under Pressure

Application Castrol EDGE 5W30 M LL-04

Castrol EDGE 5W30 M LL-04 is suitable for use in automotive gasoline and diesel vehicles where the manufacturer recommends an ACEA C3, API SN 5W-30 Lubricant. Castrol EDGE 5W30 M LL-04 is approved for use in BMW vehicles that require a BMW Longlife04 specification 5W-30 lubricant.

Castrol Power RS Ultimate 4T 10W-50 previously Castrol Power RS Racing 4T 10W-50

Properties

Castrol Power RS Ultimate 4T 10W-50

 with Trizone Technology is a premium-quality, full synthetic 4-stroke motorcycle oil designed to ensure maximum power and performance,

even under the most demanding riding conditions. Its anti-friction formulation is proven to increase acceleration compared to conventional motorcycle oils.

Specifications

Castrol Edge 5W-30 C3

Application of Castrol EDGE 5W-30 C3

Castrol EDGE 5W-30 C3 is suitable for use in automotive gasoline and diesel engines where the manufacturer recommends an API SN, ACEA C3 or earlier specification 5W-30 lubricant. Castrol EDGE 5W-30 C3 is recommended and approved for use in vehicles from leading OEMs, please refer to the specifications section and your owners handbook.

Specifications

• ACEA C3 / API SN / CF High performance shear stable petrol/diesel engine oil
• Dexos2®
• MB 229.31 & MB 229.51
• Renault RN 0700 / RN 0710; 
• Vauxhall GM-LL-A-025; GM-LL-B-025
• GB2E0209082
• VW 502.00 / VW 505.00 / VW 505.01

Castrol Alpha EP 460

Industrial Gear oil

Appliciation Castrol Alpha EP 460

The Castrol Alpha EP range offers good gear performance for most types of gears. The Castrol Alpha EP range is also suitable for mechanical-hydrodynamic transmissions, turbo clutches and hydraulics

If you have any questions, please contact OilOnline Technical Helpdesk

CASTROL Molub-Alloy OG 936 SF Heavy

Open gear compounds (solvent free)

Application CASTROL Molub-Alloy OG 936 SF Heavy

Molub-Alloy OG 936 SF Heavy is suitable for use on all types of open gears, racks and pinions and sliding or skidding applications such as draglines and shovels. It can be applied either manually or by heavy duty automatic systems. This product is used extensively in mining, construction, onshore drilling operations and on offshore installations, facilitating effective lubrication and protection on: Rack and pinion jacking mechanisms Cantilever skidding systems Mooring winch open gearing and slides FPSO offloading systems Crane slew ring & pinion Exposed threads on penstock valves Heavy duty top dressing for the ultimate protection of wire ropes Molub-Alloy OG 936 SF Heavy complies with the Bucyrus International SD 4713 specification (CAT) and Komatsu specifications for Open Gear Lubricants.

Your advantage! Price of CASTROL Molub-Alloy OG 936 SF Heavy drops automatically in larger quantities.

Castrol Magnatec 5W-30 A5

Properties

Castrol Magnatec 5W-30 A5 is suitable for use in automotive petrol and diesel engines where the manufacturer recommends ACEA A5/B5, A1/B1 or API SN/CF ILSAC GF-4 5W-30 Lubricant.

Up to 75% of engine wear happens while your engine warms up. When the engine stops oil drains off critical engine parts, however Castrol Magnatec’s intelligent molecules don’t. They cling to the engine like a magnet providing an extra layer of protection.

Specifications/ Approvals

Castrol Magnatec 5W-30 A5 has been developed for use in Ford vehicles that require a 5W-30 lubricant that meets Ford WSS-M2C913-D, Ford WSS-M2C913-C, WSS-M2C913-B or WSS-M2C913-A.

CASTROL SPHEEROL SX 2

Calcium complex grease

Application CASTROL SPHEEROL SX 2

Spheerol SX 2 is a true multipurpose ship machinery lubricant, specifically developed to provide enhanced lubrication and protection for bearings, wire ropes and open gears usually found in marine environments. Spheerol SX 2 is suitable for most journal bearings, wire ropes and open gears used in marine deck equipment and can be considered for roller, ball and needle bearings generally used in engine room equipment. In addition to the excellent protection provided for wire ropes and open gears, Spheerol SX 2 is also suitable for use on a wide range of deck equipment where it will protect and lubricate hinges, turnbuckles, screws, fair leads etc. For multipurpose applications a grease gun may be used with Spheerol SX 2. Alternatively traditional application methods can be used for wire ropes and open gears. (Please see also "Additional Information")

Your advantage! Price of CASTROL SPHEEROL SX 2 drops automatically in larger quantities.

Castrol GTX 10W40

This oil is specially engineered to prevent the harmful build-up of sludge, reduce oil deposits and provide daily protection for your engine.

It is a semi synthetic oil which cools, cleans and protects the engine.

Approvals

ACEA A3/B4
API SL/CF
MB-Approval 229.1
VW 501 01Castrol GTX 10W-40

Castrol CRB Turbomax 10W-40 E4/E7

Reliable protection for heavy duty engines

Your advantage! Price of Castrol CRB Turbomax 10W-40 E4/E7 drops automatically in larger quantities.

CASTROL ALPHA SP 460 previous Energol GR XP 460

Gear oils DIN CLP 460

Application CASTROL ALPHA SP 460

The Alpha SP 460 is recommended for the lubrication of industrial gear boxes using forced circulation or splash and oil bath lubrication. Castrol Alpha SP 460 may be used for the lubrication of spur and helical gears and in some lightly loaded worm type gear applications. They have very good viscosity characteristics to ensure starting torques are not excessively high in cold operating conditions.

The additives in Alpha SP 460 are compatible with the ferrous and non-ferrous metals used in industrial gear units. The Alpha SP 460 is compatible with the most common types of seal materials.

Alpha SP 460 is classified as follows: DIN Classification is CLP 460.

Your advantage! Price of CASTROL ALPHA SP 460 drops automatically in larger quantities.

CASTROL HYSPIN AWS 22

Anti-wear Hydraulic Oil

Application CASTROL HYSPIN AWS 22

Castrol Hyspin AWS 22 has been specially formulated to provide good anti-wear and thermal stability performance using proven additive technology. The careful blend of additives with a high quality base stock ensures that Castrol Hyspin AWS 22 has excellent hydrolytic and oxidative stability while exhibiting a minimal tendency to produce sludge and deposits.

In addition, Castrol Hyspin AWS 22 provides corrosion protection to ferrous and yellow metal components found within a hydraulic system. This range is designed for use in industrial hydraulic systems which require antiwear protection such as lightly loaded gears, variable speed units and bearings. The Castrol Hyspin AWS 22 is compatible with the most commonly used nitrile, silicone and fluropolymer seal materials

Castrol Hyspin AWS 22 is classified as follows: DIN 51502 classification - HLP ISO 6743/4 - Hydraulic Oils Type HM 22

Your advantage! Price of CASTROL HYSPIN AWS 22 drops automatically in larger quantities.

CASTROL Molub-Alloy 777-2 NG

Greases

Application CASTROL Molub-Alloy 777-2 NG

Typical applications are in all types of rolling and sliding bearings, spindles, joint couplings (except for high-speed precision couplings), running gears, cams and general grease lubricating points, especially where heavy loads and low speeds prevail. MOLUB ALLOY® 777 NG greases are especially suited for the lubrication of heavy machines e.g. forging presses or hauling machines. Due to the extremely stable lubricating film, supported by the solid lubricant combination in the mixed friction area as well as the excellent sealing effect, a quantity reduction and an improved lubricating condition ca be ensured.

Your advantage! Price of CASTROL Molub-Alloy 777-2 NG drops automatically in larger quantities.