Castrol

Castrol Alpha EP 320

Industrial Gear oil

Appliciation Castrol Alpha EP 320

The Castrol Alpha EP range offers good gear performance for most types of gears. The Castrol Alpha EP range is also suitable for mechanical-hydrodynamic transmissions, turbo clutches and hydraulics

If you have any questions, please contact OilOnline Technical Helpdesk

CASTROL SPHEEROL EPL 0

Bearing grease

Application CASTROL SPHEEROL EPL 0

Castrol Spheerol EPL 0 comprises general purpose greases designed for plant wide lubrication.  These greases provide good protection against rust and corrosion as well as resistance to water wash-out; which makes them particularly suitable for equipment where moist or wet conditions are common.

The good levels of resistance of Castrol Spheerol EPL 0 to both corrosion and water wash-out, which makes this product suitable for equipment where moist or wet conditions are common.

Your advantage! Price of CASTROL SPHEEROL EPL 0 drops automatically in larger quantities.

CASTROL ALPHA SP 320 Previously Energol GR XP 320

Gear oils

Application CASTROL ALPHA SP 320

The Alpha SP 320 is recommended for the lubrication of industrial gear boxes using forced circulation or splash and oil bath lubrication. They may be used for the lubrication of spur and helical gears and in some lightly loaded worm type gear applications. They have very good viscosity characteristics to ensure starting torques are not excessively high in cold operating conditions.

The additives in Castrol Alpha SP 320 are compatible with the ferrous and non-ferrous metals used in industrial gear units. The Alpha SP 320 is compatible with the most common types of seal materials.

Alpha SP 320 is classified as follows: DIN Classification is CLP 320.
 

Your advantage! Price of CASTROL ALPHA SP 320 drops automatically in larger quantities.

CASTROL Optigear BM 320

High Performance Gear Oils

Application CASTROL Optigear BM 320

Optigear BM is suitable for gears and bearings operating under normal to extreme conditions. Extreme pressure additives make Optigear BM suitable where there is a need to maintain high load carrying capacity while protecting against scuffing and shock loading. Optigear BM 68 and BM 220 can also be used as slideway oils subject to a metalworking fluid compatibility check.

Your advantage! Price of CASTROL Optigear BM 320 drops automatically in larger quantities.

Castrol Transmax Manual Z Long Life 75W-80 previously CASTROL Syntrans Z Long Life 75W-80

Manual Transmission Fluid

CASTROL ALPHASYN T 320

Synthetic Gear Oil

Application CASTROL ALPHASYN T 320

The Alphasyn T range has been formulated for use in most types of light to medium duty enclosed gear systems but should not be used for heavy or shock loaded systems. Alphasyn T is also suitable for bearings and circulatory systems operating at high temperatures. Alphasyn T is suitable for various applications where a lubricating oil is used under high temperatures, e.g. from hydraulic systems through to large, slow moving gears. All products in the Alphasyn T range have very low pour points and excellent viscosity and temperature characteristics, allowing their use in both low and high temperature applications. The Alphasyn T range is fully compatible with nitrile, silicone and fluropolymer seal materials.

Alphasyn T is classified as follows: DIN Classification is CL

The Alphasyn T range meets the requirements of:

• DIN 51517 Part 2
• David Brown Type A

Your advantage! Price of CASTROL ALPHASYN T 320 drops automatically in larger quantities.

CASTROL Tribol GR 100-0 PD

High Performance Bearing Greases

Application CASTROL Tribol GR 100-0 PD

The Tribol GR 100 PD Range can be used for long term lubrication even under the most difficult operating conditions such as extreme pressure, vibrations, shock loads and a wide temperature range (-35°C to 140°C / -31°F to 284°F) in highly loaded rolling and sliding bearings. Typical applications include bearings of spinning and grinding spindles, gear motors exposed to shock loads, screening / wood shaping machines and bearing surfaces of printing plates. These greases are also suitable for bearings with a rotating outer ring and undergoing high stresses due to centrifugal load. Examples are spreader rolls, roll neck bearings in steel mills, and bearings with changing rotational directions or slewing movements. They are also used in curved teeth couplings and centralised lubricating systems. Tribol GR 100-0 PD and 100-00 PD can be used as semi-fluid grease lubricants in gears such as flange, drum-type and worm gears. These two products are also suitable for use in gears without oil-tight enclosures, gear wheels and rolling bearings with a grease reservoir

Your advantage! Price of CASTROL Tribol GR 100-0 PD drops automatically in larger quantities.

CASTROL ALPHASYN EP 320

Synthetic Gear Oils

Application CASTROL ALPHASYN EP 320

The Alphasyn EP 320 have been formulated for use in all types of enclosed gears including heavy and shock-loaded gears and bearings where EP properties are required. Castrol Alphasyn EP 320 are suitable for use in gear boxes where micro-pitting resistance is required and for a wide range of applications in extreme environments, for example mining and quarrying, marine applications and paper production.

Your advantage! Price of CASTROL ALPHASYN EP 320 drops automatically in larger quantities.

CASTROL Optigear Synthetic 800/1000

Synthetic Gear Oils

Application CASTROL Optigear Synthetic 800/1000

The Optigear Synthetic 800 range is especially suited to reservoirs and circulation systems operating at high temperatures because of heat generated in severe service or high temperatures in the application. Optigear Synthetic 800 are intended for all types of heavily loaded gears including spur, bevel and worm gears. Although well suited for all types of gearing and bearings, the Optigear Synthetic 800 range is particularly effective in controlling wear and reducing friction between sliding surfaces. In addition, they possess a high degree of affinity for cupric metal alloys.

Your advantage! Price of CASTROL Optigear Synthetic 800/1000 drops automatically in larger quantities.

CASTROL Optileb GT 320

Synthetic NSF H1 gear lubricant

Application CASTROL Optileb GT 320

For the special requirements of the food and beverage industries where there may be direct exposure of the lubricated part to the edible product or its packaging. For the lubrication of spur, angular and worm gear units. For the lubrication of gear motors in stirring machines, turners, packaging machines etc. For the lubrication of chain variators, rolling and sliding bearings, pumps and closed circulating systems.

CASTROL Optigear Synthetic 800/320

Synthetic Gear Oils

Application CASTROL Optigear Synthetic 800/320

The Optigear Synthetic 800 range is especially suited to reservoirs and circulation systems operating at high temperatures because of heat generated in severe service or high temperatures in the application. Optigear Synthetic 800 are intended for all types of heavily loaded gears including spur, bevel and worm gears. Although well suited for all types of gearing and bearings, the Optigear Synthetic 800 range is particularly effective in controlling wear and reducing friction between sliding surfaces. In addition, they possess a high degree of affinity for cupric metal alloys.