Castrol

Properties

Castrol EDGE is three times stronger against viscosity breakdown than the leading synthetic and leading conventional oils.

The unique titanium technology physically changes the way oil behaves under extreme pressures doubling its film strength, preventing oil from breaking down and reducing friction to maximize engine performance.

Castrol EDGE with Fluid Titanium has twice the film strength of our previous formula based on the HFRR friction test.

Tested in 5W-30 versus all major conventional brands, Mobil1 and Mobil1 Extended Performance in the ASTM D6278 test.

Castrol EDGE is three times stronger against viscosity breakdown than the leading synthetic and leading conventional oils.

CASTROL SPHEEROL EPL 00

Bearing grease

Application CASTROL SPHEEROL EPL 00

The Spheerol EPL 00 comprises general purpose greases designed for plant wide lubrication. These greases provide good protection against rust and corrosion as well as resistance to water wash-out; which makes them particularly suitable for equipment where moist or wet conditions are common. The good levels of resistance to both corrosion and water wash-out, which makes this product suitable for equipment where moist or wet conditions are common.

Your advantage! Price of CASTROL SPHEEROL EPL 00 drops automatically in larger quantities.

Castrol Transmax Manual Z Long Life 75W-80 previously CASTROL Syntrans Z Long Life 75W-80

Manual Transmission Fluid

Castrol Tribol Grease CLS 000

Semi Fluid Extreme Pressure Grease

Application Castrol Tribol Grease CLS 000

CCastrol Tribol Grease CLS 000 is a semi-fluid (NLGI 00) extreme pressure grease for use in the central lubricating systems of commercial vehicles. 

Castrol Transmax Limited Slip LL 75W-140 previously CASTROL Syntrax Ltd Slip 75W-140

Axle Fluid for Limited Slip Differentials

CASTROL Tribol GR 100-00 PD

High Performance Bearing Greases

Application CASTROL Tribol GR 100-00 PD

The Tribol GR 100 PD Range can be used for long term lubrication even under the most difficult operating conditions such as extreme pressure, vibrations, shock loads and a wide temperature range (-35°C to 140°C / -31°F to 284°F) in highly loaded rolling and sliding bearings. Typical applications include bearings of spinning and grinding spindles, gear motors exposed to shock loads, screening / wood shaping machines and bearing surfaces of printing plates. These greases are also suitable for bearings with a rotating outer ring and undergoing high stresses due to centrifugal load. Examples are spreader rolls, roll neck bearings in steel mills, and bearings with changing rotational directions or slewing movements. They are also used in curved teeth couplings and centralised lubricating systems. Tribol GR 100-0 PD and 100-00 PD can be used as semi-fluid grease lubricants in gears such as flange, drum-type and worm gears. These two products are also suitable for use in gears without oil-tight enclosures, gear wheels and rolling bearings with a grease reservoir

Your advantage! Price of CASTROL Tribol GR 100-00 PD drops automatically in larger quantities.