Castrol

CASTROL Tribol GR 100-1 PD

High Performance Bearing Greases

Application CASTROL Tribol GR 100-1 PD

The Tribol GR 100 PD Range can be used for long term lubrication even under the most difficult operating conditions such as extreme pressure, vibrations, shock loads and a wide temperature range (-35°C to 140°C / -31°F to 284°F) in highly loaded rolling and sliding bearings. Typical applications include bearings of spinning and grinding spindles, gear motors exposed to shock loads, screening / wood shaping machines and bearing surfaces of printing plates. These greases are also suitable for bearings with a rotating outer ring and undergoing high stresses due to centrifugal load. Examples are spreader rolls, roll neck bearings in steel mills, and bearings with changing rotational directions or slewing movements. They are also used in curved teeth couplings and centralised lubricating systems. Tribol GR 100-0 PD and 100-00 PD can be used as semi-fluid grease lubricants in gears such as flange, drum-type and worm gears. These two products are also suitable for use in gears without oil-tight enclosures, gear wheels and rolling bearings with a grease reservoir

Your advantage! Price of CASTROL Tribol GR 100-1 PD drops automatically in larger quantities.

CASTROL HYSPIN AWS 68

Anti-wear Hydraulic Oil

Application CASTROL HYSPIN AWS 68

Castrol Hyspin AWS 68 has been specially formulated to provide good anti-wear and thermal stability performance using proven additive technology. The careful blend of additives with a high quality base stock ensures that Castrol Hyspin AWS 68 has excellent hydrolytic and oxidative stability while exhibiting a minimal tendency to produce sludge and deposits.

In addition, Castrol Hyspin AWS 68 provides corrosion protection to ferrous and yellow metal components found within a hydraulic system. This range is designed for use in industrial hydraulic systems which require antiwear protection such as lightly loaded gears, variable speed units and bearings. The Castrol Hyspin AWS 68 is compatible with the most commonly used nitrile, silicone and fluropolymer seal materials

Castrol Hyspin AWS 68 is classified as follows: DIN 51502 classification - HLP ISO 6743/4 - Hydraulic Oils Type HM

Your advantage! Price of CASTROL HYSPIN AWS 68 drops automatically in larger quantities.

Castrol Alpha EP 100

Industrial Gear oil

Appliciation Castrol Alpha EP 100

The Castrol Alpha EP range offers good gear performance for most types of gears. The Castrol Alpha EP range is also suitable for mechanical-hydrodynamic transmissions, turbo clutches and hydraulics

If you have any questions, please contact OilOnline Technical Helpdesk

Castrol Alpha EP 68

Industrial Gear oil

Appliciation Castrol Alpha EP 68

The Castrol Alpha EP range offers good gear performance for most types of gears. The Castrol Alpha EP range is also suitable for mechanical-hydrodynamic transmissions, turbo clutches and hydraulics

If you have any questions, please contact OilOnline Technical Helpdesk

Castrol Magna SW D 68 slideway oil

(formerly Magnaglide D 68)

Examples of application of Castrol Magna SW D 68 slideway oil are:

• + Exceptional resistance to stick-slip, so higher quality of production
• + Very good demulsifying property - prevents emulsion on the plastic pipes and thus avoids wear and downtime for repair. The oil can easily be removed from emulsions, which can significantly extend their tool life.
• + Protects metals from corrosion.
• + Excellent wetting which reduces the wear and tear on the track

Castrol Magna SW D 150 Way Oil

(formerly Magnaglide D 150)

Application

Magna SW D 150 is specially designed for the lubrication of all guideways, especially where a demulsifying oil is required to protect the way surfaces or ensure a long emulsion life. Magna SW D 150 meets the demands of challenging applications such as grinding machines, horizontal boring mills, or CNC machining centers. Magna SW D 150 can also be used as a combined hydraulic and way oil.

Examples of applications for Castrol Magna SW D 150 way oil include:

• + Exceptional resistance to stick-slip, resulting in higher production quality
• + Excellent demulsifying properties - prevents emulsion on the plastic way surfaces, thereby avoiding wear and downtime for repairs. The oil can be easily separated from emulsions, significantly extending their lifespan.
• + Protects metals against corrosion.
• + Excellent wetting, reducing way surface wear.

Castrol Magna SW D 220 slideway oil

(formerly Magnaglide D 220)

Examples to apply Castrol Magna SW D 220 slider oilare:

• + Exceptional resistance to stick-slip, so higher quality of production
• + Very good demulsifying property - prevents emulsion on the plastic pipes and thus avoids wear and downtime for repair. The oil can easily be removed from emulsions, which can significantly extend their tool life.
• + Protects metals from corrosion.
• + Excellent wetting which reduces the wear and tear on the track

Please note ! Price Castrol Magna SW D 220 slate oil drops automatically with larger quantities.

CASTROL ALPHA SP 68 previously Energol GR XP 68

Gear oils

Application CASTROL ALPHA SP 68

The Alpha SP range is recommended for the lubrication of industrial gear boxes using forced circulation or splash and oil bath lubrication. They may be used for the lubrication of spur and helical gears and in some lightly loaded worm type gear applications. They have very good viscosity characteristics to ensure starting torques are not excessively high in cold operating conditions. The additives are compatible with the ferrous and non-ferrous metals used in industrial gear units. The Alpha SP range is compatible with the most common types of seal materials.

Alpha SP is classified as follows: DIN Classification is CLP

Your advantage! Price of CASTROL ALPHA SP 68 drops automatically in larger quantities.

CASTROL ALPHA SP 100 Previously Energol GR XP 100

Gear oils

Application CASTROL ALPHA SP 100

The Alpha SP range is recommended for the lubrication of industrial gear boxes using forced circulation or splash and oil bath lubrication. They may be used for the lubrication of spur and helical gears and in some lightly loaded worm type gear applications. They have very good viscosity characteristics to ensure starting torques are not excessively high in cold operating conditions. The additives are compatible with the ferrous and non-ferrous metals used in industrial gear units. The Alpha SP range is compatible with the most common types of seal materials.

Alpha SP is classified as follows: DIN Classification is CLP

Your advantage! Price of CASTROL ALPHA SP 100 drops automatically in larger quantities.

CASTROL Hyspin ZZ 68

Anti-wear Hydraulic Oil

Application CASTROL Hyspin ZZ 68

The Hyspin ZZ range are formulated for applications requiring anti-wear and superior oxidation performance and are particularly suitable for hydraulic systems using vane and piston pumps where elevated operating temperatures are encountered. They are formulated for use in severely stressed systems in which high levels of anti-wear performance and/or ultra fine filtration are required. They have been proven to be resistant to the effects of ‘dieseling’ in highly stressed systems such as plastic injection moulding and fatigue testing equipment where the application leads to rapid breakdown of more conventional products. The range is fully compatible with elastomer materials commonly used for static and dynamic seals, such as nitrile, silicone and fluorinated (e.g. Viton) polymers.

Hyspin ZZ is classified as follows:

• DIN 51502 classification - HLP
• ISO 6743/4 - Hydraulic Oils Type HM

Hyspin ZZ grades meet the requirements (for appropriate viscosity grade) of:

• DIN 51524 Part 2
• Cincinnati Lamb (Milacron) P 68-69-70
• Denison (Parker Hannafin) HF-0
• US Steel 126 & 127
• Eaton (formerly Vickers) I-286-S & M-2950-S
• Bosch Rexroth RE90220

Your advantage! Price of CASTROL Hyspin ZZ 68 drops automatically in larger quantities.

CASTROL Hyspin AWH-M 68

High viscosity index anti-wear hydraulic oils

Application CASTROL Hyspin AWH-M 68

Hyspin AWH-M contains a shear stable additive system which helps maintain the viscosity characteristics of the product over a wide temperature range even during prolonged use and imparts a very low pour point which enables the product to be used in very cold environments. It exhibits excellent corrosion and wear protection as well as outstanding thermal and oxidative stability. In addition, Hyspin AWH-M has excellent hydrolytic stability and separates rapidly from water contamination upon standing. Applications include: Outdoor equipment which are likely to operate in wide temperature ranges, such as machinery subjected to cold start up conditions and high temperature continuous running. Examples include off-highway and marine applications. Indoor manufacturing equipment that incorporates control systems requiring minimal viscosity change with temperature. Examples include precision machine tools. The Hyspin AWH-M range is fully compatible with elastomer materials commonly used for static and dynamic seals, such as nitrile, silicone and fluorinated (e.g. Viton) polymers. Hyspin AWH-M is classified as follows: DIN 51502 classification – HVLP ISO 6743/4 - Hydraulic Oils Type HV Hyspin AWH-M grades meet the requirements (for appropriate viscosity grade) of: DIN 51524 Part 3 Cincinnati Lamb (Milacron) P 68-69-70 Denison (Parker Hannafin) HF-0 US Steel 126 & 127 Eaton (formerly Vickers) I-286-S & M-2950-SBosch Rexroth RE07075/RE90220

Your advantage! Price of CASTROL Hyspin AWH-M 68 drops automatically in larger quantities.

CASTROL Hyspin AWS 100

Anti-wear Hydraulic Oil

Application CASTROL Hyspin AWS 100

Hyspin AWS has been specially formulated to provide good anti-wear and thermal stability performance using proven additive technology. The careful blend of additives with a high quality base stock ensures that Hyspin AWS has excellent hydrolytic and oxidative stability while exhibiting a minimal tendency to produce sludge and deposits. In addition, Hyspin AWS provides corrosion protection to ferrous and yellow metal components found within a hydraulic system. This range is designed for use in industrial hydraulic systems which require antiwear protection such as lightly loaded gears, variable speed units and bearings. The Hyspin AWS range is compatible with the most commonly used nitrile, silicone and fluropolymer seal materials. Hyspin AWS is classified as follows: DIN 51502 classification - HLP ISO 6743/4 - Hydraulic Oils Type HM. Hyspin AWS grades meet the requirements (for appropriate viscosity grade) of: DIN 51524 Part 2; Cincinnati Lamb (Milacron) P 68-69-70; Denison (Parker Hannafin); HF-0 US Steel 126 & 127; Eaton (formerly Vickers) I-286-S & M-2950-S; MB – Approval 341.

Castrol Magna SW D 32 slideway oil

(formerly Magnaglide D 32)

Examples of application of Castrol Magna SW D 32 slideway oilare:

• + Exceptional resistance to stick-slip, so higher quality of production
• + Very good demulsifying property - prevents emulsion on the plastic pipes and thus avoids wear and downtime for repair. The oil can easily be removed from emulsions, which can significantly extend their tool life.
• + Protects metals from corrosion.
• + Excellent wetting which reduces the wear and tear on the track

CASTROL Aircol PD 100

Rotary Screw Compressor Lubricant

Application CASTROL Aircol PD 100

Aircol PD grades are ashless oils recommended for the lubrication of rotors, bearings and gears in rotary compressors, especially the oil flooded screw type with lubricant drain cycles of up to 2000 hours under normal use. Normal use in screw type compressors is defined by a maximum air discharge temperature =/< 100°C as defined by ISO 6743-3:2003. Aircol PD can be used for either normal or severe duty lubrication of reciprocating and rotary drip-feed air compressors, as defined by ISO 6743. Normal duty is described as:- discharge temperatures =/< 165°C; differential pressures =/< 2.5 MPa (25 bar); discharge pressures =/< 7.0 MPa (70 bar). Severe Duty is described as:- discharge temperatures > 165°C; differential pressures > 2.5 MPa (25 bar); discharge pressures > 7.0 MPa (70 bar). Aircol PD compressor oils exhibit low carbon forming tendencies and meet the requirements of the DIN 51506 VDL classification for reciprocating compressors having air discharge temperatures up to 220°C. Selection of the required viscosity grade should be based upon the compressor manufacturers’ recommendation. However as a general guide Aircol PD 32 and 46 are suitable for oil flooded rotary compressors, whereas Aircol PD 68 and 100 would be selected for lubricating the crankcase and cylinders of reciprocating compressors. Aircol PD 150 is recommended for sliding-vane compressors, or for reciprocating units at high ambient temperatures. The Aircol PD range is fully compatible with nitrile, silicone and fluropolymer seal materials. Aircol PD is classified as follows: DIN 51506 classification - VDL; ISO 6743/3 - DAA and DAB for reciprocating air compressors, DAG for rotary air compressors. Aircol PD meets the requirements (for appropriate viscosity grade) of major compressor manufacturers such as Atlas Copco, Champion, Sullair, Compair/Broomwade, Ingersoll-Rand, Kaeser and Bauer.

CASTROL Aircol CM 68 previously Aircol PD 68

Rotary Screw Compressor Lubricant

Application CASTROL Aircol CM 68

Aircol CM 68 grades are ashless oils recommended for the lubrication of rotors, bearings and gears in rotary compressors, especially the oil flooded screw type with lubricant drain cycles of up to 2000 hours under normal use. Normal use in screw type compressors is defined by a maximum air discharge temperature =/< 100°C as defined by ISO 6743-3:2003. Aircol CM 68 can be used for either normal or severe duty lubrication of reciprocating and rotary drip-feed air compressors, as defined by ISO 6743. Normal duty is described as:- discharge temperatures =/< 165°C; differential pressures =/< 2.5 MPa (25 bar); discharge pressures =/< 7.0 MPa (70 bar). Severe Duty is described as:- discharge temperatures > 165°C; differential pressures > 2.5 MPa (25 bar); discharge pressures > 7.0 MPa (70 bar). Aircol CM 68 compressor oils exhibit low carbon forming tendencies and meet the requirements of the DIN 51506 VDL classification for reciprocating compressors having air discharge temperatures up to 220°C. Selection of the required viscosity grade should be based upon the compressor manufacturers’ recommendation. However as a general guide Aircol CM 68 would be selected for lubricating the crankcase and cylinders of reciprocating compressors. The Aircol CM 68 is fully compatible with nitrile, silicone and fluropolymer seal materials. Aircol CM 68 is classified as follows: DIN 51506 classification - VDL; ISO 6743/3 - DAA and DAB for reciprocating air compressors, DAG for rotary air compressors. Aircol CM 68 meets the requirements (for appropriate viscosity grade) of major compressor manufacturers such as Atlas Copco, Champion, Sullair, Compair/Broomwade, Ingersoll-Rand, Kaeser and Bauer.

CASTROL HYSPIN HVI 68 previously Castrol Vario HDX 68

High Viscosity Index anti-wear Hydraulic oils

Application CASTROL HYSPIN HVI 68

Hyspin HVI 68 oils are intended for severely stressed hydraulic systems requiring a high level of anti-wear performance and fine filtration. In addition, Hyspin HVI 68 exhibits excellent corrosion protection as well as outstanding thermal and oxidative stability. Hyspin HVI 68 has excellent hydrolytic stability and separates rapidly from water contamination.

Hyspin HVI 68 contains a shear stable additive system which helps to maintain the viscosity characteristics of the product over a wide temperature range, even during prolonged use, and imparts a very low pour point which enables the product to be used in cold environments.

Your advantage! Price of CASTROL HYSPIN HVI 68 drops automatically in larger quantities.

CASTROL HYSPIN HVI 100

High Viscosity Index anti-wear Hydraulic oils

Application CASTROL HYSPIN HVI 100

Hyspin HVI 100 oils are intended for severely stressed hydraulic systems requiring a high level of anti-wear performance and fine filtration. In addition, Hyspin HVI 100 exhibits excellent corrosion protection as well as outstanding thermal and oxidative stability. Hyspin HVI 100 has excellent hydrolytic stability and separates rapidly from water contamination.

Hyspin HVI 100 contains a shear stable additive system which helps to maintain the viscosity characteristics of the product over a wide temperature range, even during prolonged use, and imparts a very low pour point which enables the product to be used in cold environments.

Your advantage! Price of CASTROL HYSPIN HVI 100 drops automatically in larger quantities.

CASTROL SPHEEROL EPL 1

Bearing grease

Application CASTROL SPHEEROL EPL 1

The Spheerol EPL 1 comprises general purpose greases designed for plant wide lubrication. These greases provide good protection against rust and corrosion as well as resistance to water wash-out; which makes them particularly suitable for equipment where moist or wet conditions are common. The good levels of resistance to both corrosion and water wash-out, which makes this product suitable for equipment where moist or wet conditions are common.

Your advantage! Price of CASTROL SPHEEROL EPL 1 drops automatically in larger quantities.

Castrol Transmax Manual Z Long Life 75W-80 previously CASTROL Syntrans Z Long Life 75W-80

Manual Transmission Fluid