Castrol

Castrol Alpha EP 680

Industrial Gear oil

Appliciation Castrol Alpha EP 680

The Castrol Alpha EP range offers good gear performance for most types of gears. The Castrol Alpha EP range is also suitable for mechanical-hydrodynamic transmissions, turbo clutches and hydraulics

If you have any questions, please contact OilOnline Technical Helpdesk

CASTROL ALPHA SP 680 Previously Energol GR XP 680

Gear oils DIN CLP 680

Application CASTROL ALPHA SP 680

The Alpha SP 680 is recommended for the lubrication of industrial gear boxes using forced circulation or splash and oil bath lubrication. Castrol Alpha SP 680 may be used for the lubrication of spur and helical gears and in some lightly loaded worm type gear applications. They have very good viscosity characteristics to ensure starting torques are not excessively high in cold operating conditions.

The additives in Alpha SP 680 are compatible with the ferrous and non-ferrous metals used in industrial gear units. The Alpha SP 680 is compatible with the most common types of seal materials.

Alpha SP 680 is classified as follows: DIN Classification is CLP 680.

Your advantage! Price of CASTROL ALPHA SP 680 drops automatically in larger quantities.

CASTROL SPHEEROL EPL 00

Bearing grease

Application CASTROL SPHEEROL EPL 00

The Spheerol EPL 00 comprises general purpose greases designed for plant wide lubrication. These greases provide good protection against rust and corrosion as well as resistance to water wash-out; which makes them particularly suitable for equipment where moist or wet conditions are common. The good levels of resistance to both corrosion and water wash-out, which makes this product suitable for equipment where moist or wet conditions are common.

Your advantage! Price of CASTROL SPHEEROL EPL 00 drops automatically in larger quantities.

Castrol Tribol Grease CLS 000

Semi Fluid Extreme Pressure Grease

Application Castrol Tribol Grease CLS 000

CCastrol Tribol Grease CLS 000 is a semi-fluid (NLGI 00) extreme pressure grease for use in the central lubricating systems of commercial vehicles. 

CASTROL Optigear BM 680

High Performance Gear Oils

Application CASTROL Optigear BM 680

Optigear BM is suitable for gears and bearings operating under normal to extreme conditions. Extreme pressure additives make Optigear BM suitable where there is a need to maintain high load carrying capacity while protecting against scuffing and shock loading. Optigear BM 68 and BM 220 can also be used as slideway oils subject to a metalworking fluid compatibility check.

Your advantage! Price of CASTROL Optigear BM 680 drops automatically in larger quantities.

CASTROL Tribol GR 100-00 PD

High Performance Bearing Greases

Application CASTROL Tribol GR 100-00 PD

The Tribol GR 100 PD Range can be used for long term lubrication even under the most difficult operating conditions such as extreme pressure, vibrations, shock loads and a wide temperature range (-35°C to 140°C / -31°F to 284°F) in highly loaded rolling and sliding bearings. Typical applications include bearings of spinning and grinding spindles, gear motors exposed to shock loads, screening / wood shaping machines and bearing surfaces of printing plates. These greases are also suitable for bearings with a rotating outer ring and undergoing high stresses due to centrifugal load. Examples are spreader rolls, roll neck bearings in steel mills, and bearings with changing rotational directions or slewing movements. They are also used in curved teeth couplings and centralised lubricating systems. Tribol GR 100-0 PD and 100-00 PD can be used as semi-fluid grease lubricants in gears such as flange, drum-type and worm gears. These two products are also suitable for use in gears without oil-tight enclosures, gear wheels and rolling bearings with a grease reservoir

Your advantage! Price of CASTROL Tribol GR 100-00 PD drops automatically in larger quantities.

CASTROL Optigear Synthetic 800/680

Synthetic Gear Oils

Application CASTROL Optigear Synthetic 800/680

The Optigear Synthetic 800 range is especially suited to reservoirs and circulation systems operating at high temperatures because of heat generated in severe service or high temperatures in the application. Optigear Synthetic 800 are intended for all types of heavily loaded gears including spur, bevel and worm gears. Although well suited for all types of gearing and bearings, the Optigear Synthetic 800 range is particularly effective in controlling wear and reducing friction between sliding surfaces. In addition, they possess a high degree of affinity for cupric metal alloys.

CASTROL BioTac MP

Environmentally responsible multipurpose EP grease

Unfortunately no longer available

We recommend this replacement Shell Naturelle Grease S2 A600P 1.5

Application CASTROL BioTac MP

BioTac MPTM has been developed primarily for use on exposed marine deck applications and combines excellent physical properties that enable resistance to both mechanical shear and water spray-off with an additive system developed to protect exposed components from corrosion, oxidation and the effects of load, friction and wear. BioTac MPTM is intended for use in a wide range of applications including plain bearings, wire ropes and open gears typically found in marine mooring and cargo winches. Furthermore, ramp door bearings, pedestal bearings and cargo hatch rollers are also examples of slow/medium speed marine deck applications for which BioTac MPTM is ideally suited. The combination of thickener and base oil technology enables BioTac MPTM to have a broad operating temperature range of between -35C and +125C.