Fuchs Cassida Chain Oil LT 22 L

h3>CASSIDA CHAIN HTE Performance, Features & Benefits:

Certified by NSF for ISO 21469 and registered by NSF (Class H1) for use where there is potential for incidental food contact. Product contains only substances permitted under US 21 CFR 178.3570, 178.3620 and 182 for use in lubricants with incidental food contact.

• + Thermal stability up to 250 °C (temperature limits to be confirmed in field trials)
• + Low evaporative loss
• + Excellent corrosion resistance
• + Medium viscosity for easy application
• + Excellent adhesive properties minimize “fling-off” in use and wash-off by both cold and hot water
• + Easily applied by either brush, through baths or by automatic lubrication system
• + Neutral odor and taste
• + Solvent-free formulations to provide greater safety in use
• + CASSIDA CHAIN OIL HTE is not compatible with mineral oils. All equipment must be carefully cleaned before using CASSIDA CHAIN OIL HTE
   

Seal & Paint Compatibility of CASSIDA CHAIN HTE

Compatible with the elastomers, gaskets, seals and paints normally used in food machinery lubrication systems.
 

Synthetic lubricant

• Does not contain natural products derived from animals or genetically modified organisms (GMO)
• Does not contain any allergenic or intoleranceinducing substances as specified in Annex IIIa of EC directive 2003/89/EC
• Suitable for use where vegetarian and ‘nut-free’ food is prepared
• Biostatic; does not promote the growth of bacteria or fungal organisms
   

Approvals & Recommendations

This is an ongoing process, please contact your local partner for any updates.

"Incidental Food contact"

Registered by NSF (Class H1) and meets the USDA H1 guidelines (1998) for lubricants for use where there is a potential for incidental food contact. Certified by NSF for ISO 21469, Safety of machinery, Lubricants with incidental product contact, Hygiene requirements. Made only from substances permitted under the US FDA Title 21 CFR 178.3570, 178.3620 and/or those generally regarded as safe (US 21 CFR 182) for use in food grade lubricants. To comply with the requirements of US 21 CFR 178.3570, contact with food should be avoided where possible. In the case of incidental food contact, the concentration of this product in the food must not exceed 1 parts per million (1mg/kg of foodstuff). In locations and/or applications where local legislation does not specify maximum concentration limits, it is recommended that this same 1 ppm limit be observed, as up to this concentration CASSIDA CHAIN OIL HTE will not impart undesirable taste, odour or colour to food, nor will cause adverse health effects. Consistent with good manufacturing practice, use only the amount necessary to achieve correct lubrication and take appropriate corrective action should excessive incidental contact with food be detected.

Protect the environment

Take used lubricants and empty packs to an authorised collection point. Do not discharge into drains, soil or water.

Health & Safety

Based on information available, CASSIDA CHAIN OIL HTE is unlikely to present any significant health or safety hazard when properly used in the recommended application and good standards of industrial and personal hygiene are maintained. As for all oils, prolonged or repeated contact with the skin should be avoided. For further information refer to the appropriate Material Safety Data Sheet.
 

Handling & storage

All food grade lubricants should be stored separately from other lubricants, chemical substances and foodstuffs and out of direct sunlight or other heat sources. Store between 0°C and 40°C. Provided that the product has been stored under these conditions we recommend that the product be used within 5 years from the date of manufacture. Accept for use new CASSIDA CHAIN OIL HTE only if the manufacturer's seal is intact. Before opening the pack ensure the area around the closure is clean. It is recommended that it be cleaned with potable water and then dried with a clean cloth before opening. Record the date the seal was broken. To prevent product contamination, always close the package after use. Upon opening a pack, the product must be used within 2 years (or within 5 years of date of manufacture, whichever is the sooner).

If you have any questions, please contact OilOnline Technical Helpdesk
 

Typical Physical Characteristics of CASSIDA CHAIN HTE

Is Shell Cassida Chain Oil LT the same as Fuchs Cassida Chain Oil LT?

Fuchs Cassida are speciality lubricants designed for use in the food industry. Fuchs Cassida products have the same properties as Shell Cassida because Fuchs acquired Shell's food-safe line in 2008. They are widely used in the food and beverage industry. However, it is important to choose the right lubricant based on the specific application and equipment requirements.

What are the properties of Fuchs Cassida Chain Oil LT?

Fuchs Cassida Chain Oil LT has several properties that make it suitable for use in the food industry. The lubricant is specially formulated to meet stringent food safety requirements. It is made from high-quality, non-toxic ingredients that are safe for incidental contact with food. Cassida Chain Oil LT provides excellent lubrication and wear protection, resulting in reduced friction and wear of conveyor chains. The lubricant has good adhesion properties, so it stays well on chains even under high loads and in wet conditions. In addition, Cassida Chain Oil LT is resistant to water, steam and detergents, maintaining performance and prolonging chain life. The lubricant is also easy to apply and has good compatibility with seals, minimising leaks and improving equipment efficiency.

Where can I buy Fuchs Cassida Chain Oil LT?

OilOnline is the largest online lubricant webshop with only worldwide well-known brands including Fuchs Cassida Chain Oil LT. OilOnline customers appreciate the convenience and time-saving of being able to buy lubricants online 24/7 at a competitive price. Questions no problem: Knowledge is our strength! www.oilonline.store