Fuchs Cassida FM Heat Transfer Fluid 32 Foodgrade

FM HEAT TRANSFER FLUID 32 Performance, Features & Benefits:

Certified by NSF for ISO 21469 and registered by NSF (Class HT1) for use where there is potential for incidental food contact. Produced according to FLT Quality Standards, in facilities where HACCP audit and Good Manufacturing Practice have been implemented and form part of the quality and hygiene management systems ISO 9001 and ISO 21469.

• + Wide temperature range for application
• + High temperature and oxidation stability
• + Neutral odour and taste
   

Seal & Paint Compatibility of FM HEAT TRANSFER FLUID 32

Compatible with the elastomers, gaskets, seals and paints normally used in food machinery lubrication systems.

Operating Guidelines

Care should be taken to ensure suffi cient fl ow rate to avoid even a temporary overheating of the FM HEAT TRANSFER FLUID 32. Reynolds-Number should be >10,000 (ten thousand). This is most important during start up and shut down of the heating system. The surface temperature of the heating elements (fi lm temperature) should not exceed +340 °C. For physical parameters of the oil necessary for the calculation of the heat transfer coeffi cient in the system, such as density, specifi c heat and coeffi cient of thermal conductivity please contact your local partner. To ensure maximum lifetime it is recommended to monitor the oil periodically.
 

Specifications & Certificates

• NSF HT1
• NSF ISO 21469
• Kosher
• Halal
• DIN 51522 Ql
• ISO 6743-12 QC/QE
   

Handling & storage

All food grade lubricants should be stored separately from other lubricants, chemical substances and foodstuffs and out of direct sunlight or other heat sources. Store between 0 °C and +40 °C. Provided that the product has been stored under these conditions we recommend to use the product within 5 years from the date of manufacture. Upon opening a pack, the product must be used within 2 years (or within 5 years of date of manufacture, whichever is the sooner).

If you have any questions, please contact OilOnline Technical Helpdesk
 

Typical Physical Characteristics of FM HEAT TRANSFER FLUID 32

Is Shell Cassida FM Heat Transfer Fluid 32 Foodgrade the same as Fuchs Cassida FM Heat Transfer Fluid 32 Foodgrade?

Fuchs Cassida are speciality lubricants designed for use in the food industry. Fuchs Cassida products have the same properties as Shell Cassida because Fuchs acquired Shell's food-safe line in 2008. They are widely used in the food and beverage industry. However, it is important to choose the right lubricant based on the specific application and equipment requirements.

What is the maximum operating temperature of Fuchs Cassida FM Heat Transfer Fluid 32 Foodgrade?

Fuchs Cassida FM Heat Transfer Fluid 32 Foodgrade is specially designed to transfer heat in food processing and manufacturing processes. The lubricant is suitable for use at temperatures up to 320°C (608°F). This means that it can reliably and efficiently transfer heat in systems operating at high temperatures, such as heat exchangers and heating systems in the food industry.

Where can I buy Fuchs Cassida FM Heat Transfer Fluid 32 Foodgrade?

OilOnline is the largest online lubricant webshop with only globally known brands including Fuchs Cassida FM Heat Transfer Fluid 32 Foodgrade. OilOnline customers appreciate the convenience and time-saving of being able to buy lubricants online 24/7 at competitive prices. Questions no problem: Knowledge is our strength! www.oilonline.store