Houghton

Houghton Garia SL 601

It is a cutting oil often used in micro screw feeders.

Properties

+ Chlorine free.

+ No aromatic components.

+ No oil mist .

+ Free of heavy metals.

+Very low power consumption.

+ Based on Synthetic esters.

+ High levels of anti-wear additives, EP -EN.

+ Biodegradable

Houghton Ensis DW 2462 (formerly Shell Ensis SX)

Ensis DW2462 is a rust inhibitor with drainage properties for medium protection

Ensis DW 2462 is a rust inhibitor with a medium-term protection duration (up to 24 months within storage). Ensis DW 2462 is a solvent-based anti-rust agent with dewatering properties that, after evaporation of the solvent, leaves a temporary waxy film on the metal surfaces to be protected.
Ensis DW 2462 protects metal parts in an efficient way against the damaging effects of humidity, air, detergents and other contaminants. Ensis DW 2462 can be applied by means of immersion or spraying.

Advantages of Houghton Ensis DW 2462 (formerly Shell Ensis DW 2462)are:

• + Protection duration:
  • Inside: 24 months
  • Covered outside: 9-12 months
  • Unprotected outside: 6 months
• + Easy to remove with alkaline or solvent-based cleaners
• + Neutralized fingerprints
• + Short drying time leaves dry thin wax protection film

Houghton Ensis DW 6055 (Previous Ensis 6062 and Ensis TX & Ensis V)

Properties

ENSIS DW 6055 is a blend of dearomatised solvent, and carefully selected performance additives which provide up to 60 months indoor protection and several months outdoor protection.

ENSIS DW 6055 is a premium quality dewatering rust preventive and exhibits a waxy film, which resists peeling and cracking, neutralizes fingerprints and can be removed if required.

ENSIS DW 6055 is effective on ferrous and non-ferrous metal. It is Barium free.

Applications

ENSIS DW 6055 provides extra long term protection and final protection, on:

• (Semi)-finished automotive and machinery components like valves, gears, camshaft, box, bearing, chains, motor, fasteners, braking system, precision components with highly finished surfaces...
• Materials and equipment during shipment overseas, when properly packed.
• Materials and equipment which are subjected to hostile conditions ego Coastal and Marine environments.
• Drill pipe and casing in outdoor coastal locations.
• Steel structures during operation or storage periods. Particularly resistant to carry-over of alkaline grinding coolants, soluble oil emulsions and acidic rinse water..

Houghton Macron SL 501

A versatile cutting oil, based on vegetable fatty alcohols.

Properties

• Long tool life and improved surface finish of the machined work pieces
• Excellent oxidation stability
• Skin compatible and friendly
• Environmentally responsible
• Chlorine free
• Free of heavy metals (zinc free)
• Free of aromatic hydrocarbons
• No aromatic components
• No oil mist
• Very low power consumption rerquired
• No staining.

Grotanol SR2

Properties

Grotanol SR 2 is efficient against microbiological accumulation (bio-films) in systems and has an excellent immediate efficiency against bacteria, yeasts and fungi. Additionally, grotanol SR 2 has anticorrosive and low-foaming properties.

High concentrated and free of water.

Effective even in very low use-concentrations.

Usable for all steel-, copper and aluminium alloys.

Suitable for low to medium alcalic medium (pH 8 - 11)

Contains no organically bound chlorine (has no effect on the AOX value).

Houghton Macron 400 M-32

Properties

Macron 400 M-32 is based on hydro treated mineral oil with low aromatic content. A combination of polar, extreme pressure and anti-wear additives provide the oil with high load carrying properties. The oil provides good surface finish of the machined work pieces.

Macron 400 M-32 is free from zinc, chlorine and active sulphur.

Applications

Macron 400 M-32 is a high performance cutting oil for operations on light and medium alloyed steels, aluminium and yellow metals.

Macron 400 M-32 has multipurpose oil characteristics for cutting and hydraulic oil HLP DIN 51524-2 and gear oil CLP DIN 51517-3.

It has a good de-aeration power, does not foam and is not aggressive for the paints on machine tools.

MACRON 400 M-32 is based on hydro treated mineral oil with low aromatic content. A combination of polar, extreme pressure and anti-wear additives provide the oil with high load carrying properties. The oil provides good surface finish of the machined work pieces.

MACRON 400 M-32 is free from zinc, chlorine and active sulphur. 

Advantages:

• Increased productivity - reduced machine downtime.
• Reduced cost - long sump life.
• Secure handling - fulfills HLP 1 CLP standards.
• Secure handling - high EHS standard.

Houghton Garia 404 M-10

Properties

Garia 404 M-10 is a neat cutting oil for machining high alloyed steels, aluminum and magnesium alloys. Garia 404 M-10 is chlorine free, free of heavy metals and it has a low aromatic content. It contains a well balanced combination of polar, extreme pressure and anti-wear additives which gives the oil high load carrying properties. Due to its active sulphur content, the oil may discolor yellow metals.

Applications

Garia 404 M-10 is recommended for:

Grinding

Deep-hole drilling

Taping or broaching of low to medium alloyed steels

Gear hobbing

Machining on automatic lathes

Garia 404 M-10 is used neat as supplied.

Houghton Macron 205 M-8

Properties

Macron 205 M-8 is based on hydro treated mineral oil with low aromatic content. A combination of polar, extreme pressure and anti-wear additives provide the oil with high load carrying properties. The oil provides good surface finish of the machined work pieces.

Macron 205 M-8 is zinc and sulphur free.

Applications

Macron 205 M-8 is a universal honing, superfinishing and grinding oil.

Typical application is in the bearing industry and electronic industry for fine machining of aluminium and yellow metals.

Macron  205 M-8 has higher viscosity compared to other typical honing oils.

Houghton Macron 2425 S-14

Properties

Macron 2425 S-14 is based on hydro treated mineral oil with low aromatic content. A combination of polar, extreme pressure and anti-wear additives provide the oil with high load carrying properties. The oil provides good surface finish of the machined work pieces. Macron 2425 S-14 is chlorine and Zinc free.

Applications

Macron 2425 S-14 is a high performance grinding oil, used for flute grinding on high-speed steel, and with ceramic and diamond or boron nitrite grinding wheels.

Macron 2425 S-14 can also be used for grinding spiral toothed bevel gears and flat or cylindrical grinding processes, on the complete range of steels and non-ferrous metals.

Approvals

Product is approved by Liebherr, Kapp, Niles, Junker, Hofler, Klingelnberg.

MACRON 2429 S-8

It is based on HC hydro crack base oil technology with very low aromatic content. A combination of polar, extreme pressure and anti-wear addivies provide the oil with high load carrying properties. The oil provides good surface finish of the machined work pieces.

Properties

MACRON 2429 S-8 is free from zinc, chlorine and active sulphur.

Applications

MACRON 2429 S-8 main application is for grinding cemented carbide with diamond wheels. The product is also suitable for grinding steel with CBN and ceramic wheels at high cutting speeds. The selection of additives along with low viscosity allows finest filtration even below 1 pm mesh.

MACRON 2429 S-8 is inhibited against leaching of cobalt.

Approvals

Product is approved by Waiter, Schutte, Junker, Transor.

Houghton Garia 405 M-22

Properties

GARIA 405 M-22 is based on hydro treated mineral oil with low aromatic content. A combination of polar. extreme pressure and anti-wear additives provide the oil with high load carrying properties. The oil provides good surface finish of the machined work pieces.

GARIA 405 M-22 contains active sulphur and may discolour yellow metals.

The oil is zinc and chlorine free.

Applications

GARIA 405 M-22 is the universal oil for the gear shop. It shows excellent performance for the gear grinding as well as for gear hobbing and shaping operations.

GARIA 405 M-22 is used also for the machining of steel and cast iron on automatic turning lathes.

Approvals

Hofler and Klingelnberg.

Medium term rust preventive oil

Ensis RPO 1200 is a solvent free, oil-based temporary corrosion preventative for metal surfaces likely to corrode in storage or use Ensis RPO 1200 leaves a thin, self-healing, oily, protective film on surfaces requiring temporary protection. It is ideal for use on finished parts, subjected to indoor storage of up to twelve months.

Important properties of Houghton Ensis RPO 1200 (previous name Shell Ensis RPO 1200) are:

• + Indoor protection for 12 months
• + Outdoor covered protection for 3 months
• + No cleaning needed before parts assembling
• + Low volatility
• + High flashpoint

Houghton Garia 602.02 M-15

Properties

Houghton’s Garia™ series line of neat cutting oils contain active chemistry for medium to severe cutting of aluminum, cast iron, steel and stainless steel. Additives ensure long sump life and resistance to dilution with tramp oils.

The oils show excellent results by working with many difficult operations like broaching, deep-hole drilling, tapping, shaping or shaving of gears. 

Using Houghton 602.02 Garia M-15 specifically in deep drilling operations allows higher cutting speeds and greater lubrication providing  very high efficiency combined with minimum wear of cutting heads and drill guides.

Chlorine Free
Low aromatics 
Low oil mist and evaporation 
Good wetting properties
Free of heavy metals

Houghton Garia 602.02 M-15 is a cutting oil that can be used for machining of a wide variety of materials, such as cast iron, copper alloys, aluminum alloys, steel alloys, stainless steel, acid-and heat-resistant steels.

Houghton 602.02 Garia M-15 was designed for difficult machining operations such as deep drilling, drilling, reaming, threading, grinding, broaching and gear cutting on the above mentioned materials. Using Houghton 602.02 Garia M-15 specifically in deep drilling operations allows higher cutting speeds and greater lubricity thereby providing  high efficiency combined with minimum wear of cutting heads and drill guides.

Houghton Garia 601 M-12

Properties

GARIA 601 M-12 is based on hydro treated mineral oil with low aromatic content. A combination of polar, extreme pressure and anti-wear additives provide the oil with high load carrying properties. The oil provides good surface finish of the machined work pieces

Garia 601 M-12 and M-22 are neat cutting oils for machining of high alloy steels (stainless,heat resistant, austenitic, etc.) and aluminium ormagnesium alloys.

The oils show excellent results in working with many difficult operations like broaching, deep-hole drilling, tapping, shaping,and shaving of gears.

• Garia 601 M-12 and M-22 products are also very good grinding oils.
• Garia 601 M-12 and M-22 contain active sulphur - there is a risk of staining of yellow metals.
• Garia 601 M-12 and M22 are free of chlorine and heavy metals.

Approved by Kay's Engineering (Eldorado machines) for gun drilling.