7 warehouses in Europe
Klüber Centoplex H0
97% supplied in 5 working days
Shipping costs for all EU countries are calculated at checkout.
VAT number required
during checkout
Pay online or by invoice (within 30 days)
Klüber Centoplex H0
Multi-purpose grease
Application Klüber Centoplex H0
CENTOPLEX HO is used for the lubrication of toothed and worm gears and for small low-power gears. It can also be used in well-sealed rolling and plain bearings with low internal clearance and operating at high speeds. CENTOPLEX HO is used e.g. in garage door drives, plain bearings in telescopic axles, leaf springs in rail vehicles, and as a multi-purpose grease in lorries, construction vehicles, special-purpose and agricultural vehicles.
Performance, Features & Benefits of Klüber Centoplex H0 are:
- Special grease for a variety of applications
- Good low-temperature behaviour
- Excellent corrosion protection properties
- Resistant to oxidation
If you have any questions, please contact OilOnline Technical Helpdesk
Product Description Klüber Centoplex H0
CENTOPLEX HO is a mineral oil based, lithium saponified lubricating grease for a wide range of applications. It is resistant to oxidation, has a very good low-temperature behaviour and protects well against corrosion.
Typical Characteristics
| Product specifications : | Klüber Centoplex H0 | |
| Article number | 020011 | |
| Texture | homogeneous | |
| Texture | fibrous | |
| Colour space | brown | |
| Density at 20 °C | approx. 0.88 g/cm³ | |
| NLGI grade, DIN 51818 | DIN 51818 | 0 |
| Worked penetration, lower limit value | DIN ISO 2137, 25 °C | 355 x 0.1 mm |
| Worked penetration, upper limit value | DIN ISO 2137, 25 °C | 385 x 0.1 mm |
| Kinematic viscosity of the base oil, 40 °C | DIN 51562 pt. 01/ASTM D-445/ASTM D 7042 | approx. 100 mm²/s |
| Kinematic viscosity of the base oil, 100 °C | DIN 51562 pt. 01/ASTM D-445/ASTM D 7042 | approx. 10 mm²/s |
| Corrosion inhibiting properties of lubricating greases, (SKF-EMCOR), test duration: 1 week, distilled water |
DIN 51802 | <= 1 corrosion degree |
| Flow pressure of lubricating greases, test temperature: -30 °C | DIN 51805-2 | <= 1 400 mbar |
| Drop point, | DIN ISO 2176, IP 396 | >= 170 °C |
| Speed factor (n x dm) | approx. 500 000 mm/min | |
| Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx. |
24 months |
Application notes
CENTOPLEX HO can be applied by grease gun, brush or spatula. For CENTOPLEX HO, we recommend a service temperature range between -30 and 100 °C, depending on lubricant structure, intended use and application technique.
Satisfied customers:
Quality brands only
genuine packages
Save costs
take control of your costs
save time and money
Global Deliveries
sea containers
air freight worldwide
