7 warehouses in Europe
Klüber DUOTEMPI PMY 45
97% supplied in 5 working days
Shipping costs for all EU countries are calculated at checkout.
VAT number required
during checkout
Pay online or by invoice (within 30 days)
Klüber DUOTEMPI PMY 45
Light-coloured high-pressure lubricating paste
Application Klüber DUOTEMPI PMY 45
As a lubricating paste: For low-speed (plain) bearings, guides, joints, bushes, eccentric units, seals, bolts, and hinges in all fields of plant and machine engineering. For automotive components such as gear shift gates, ball joints, seat rails, steering-knuckle pins or profile gears. As an assembly paste: For interference, transition, and loose fits. As a screw paste: For austenitic materials (A2-70) and the assembly of screws and bolts under normal temperature conditions.
Performance, Features & Benefits of Klüber DUOTEMPI PMY 45 are:
- Easy assembly and disassembly of frictional connections subject to medium surface pressure and temperature
- Ensures reliable screw connection by provision of an adequate preload force during assembly
- Prevents fretting corrosion enabling increased component lifetime
If you have any questions, please contact OilOnline Technical Helpdesk
Product Description Klüber DUOTEMPI PMY 45
DUOTEMPI PMY 45 is a light-coloured high-pressure lubricating paste for frictional connections subject to medium temperatures in predominantly dry environments. DUOTEMPI PMY 45 is based on mineral and synthetic hydrocarbon oils plus solid lubricants and special lithium soap. DUOTEMPI PMY 45 ensures easy assembly and disassembly of interference fits and clamping connections subject to medium loads while preventing fretting corrosion (tribo-corrosion).
Typical Characteristics
| Product specifications | Method |
Klüber DUOTEMPI PMY 45 |
|
| Article number | 005066 | ||
| Lower service temperature | -40 °C / -40 °F | ||
| Upper service temperature | 120 °C / 248 °F | ||
| Colour space | beige | ||
| Texture | short-fibred | ||
| Texture | homogeneous | ||
| Density | 20 °C | approx. 1.20 g/cm³ | |
| Worked penetration, lower limit value | 25 °C | DIN ISO 2137 | 245 x 0.1 mm |
| Worked penetration, upper limit value | 25 °C | DIN ISO 2137 | 275 x 0.1 mm |
| Drop point | >= 190 °C | DIN ISO 2176, IP 396 | |
| Four-ball tester, welding load | DIN 51350 pt. 04 | >= 3 200 N | |
| Friction coefficient screw test, measured with hexagon bolts M10x50-A2-70, tightening speed n = 5 rpm, number of screws = 20, material of the nut A2, face material 42CrMo4 with roughness Ra 1.6, tightening torque MA = 40 Nm, averaged bearing surface friction coefficient (initial tightening) |
DIN EN ISO 4017 | 0.1 | |
| Friction coefficient screw test, measured with hexagon bolts M10x50-A2-70, tightening speed n = 5 rpm, number of screws = 20, material of the nut A2, face material 42CrMo4 with roughness Ra 1.6, tightening torque MA = 40 Nm, standard deviation (S) of averaged bearing surface friction coefficient (initial tightening) |
DIN EN ISO 4017 | 0.003 | |
| Friction coefficient screw test, measured with hexagon bolts M10x50-A2-70, tightening speed n = 5 rpm, number of screws = 20, material of the nut A2, face material 42CrMo4 with roughness Ra 1.6, tightening torque MA = 40 Nm, averaged thread friction coefficient (initial tightening) |
DIN EN ISO 4017 | 0.09 | |
| Friction coefficient screw test, measured with hexagon bolts M10x50-A2-70, tightening speed n = 5 rpm, number of screws = 20, material of the nut A2, face material 42CrMo4 with roughness Ra 1.6, tightening torque MA = 40 Nm, standard deviation (S) of averaged thread friction coefficient (initial tightening) |
DIN EN ISO 4017 | 0.011 | |
| Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx. |
24 months |
Application notes
Before applying DUOTEMPI PMY 45 it is important to clean and degrease all contact surfaces and to apply the paste in a thin layer using a brush, plastic sponge or a dry, lint-free cloth. DUOTEMPI PMY 45 is compatible with many sealing materials and elastomers; however, we recommend undertaking a materials compatibility test with the lubricant used prior to series application.
Satisfied customers:
Quality brands only
genuine packages
Save costs
take control of your costs
save time and money
Global Deliveries
sea containers
air freight worldwide
