Klüber HOTEMP PLUS

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Your benefit: pallet advantage from 2 barrels

97% supplied in 5 working days

Shipping Rate

No VAT within the EU

Grouped product items
Qty	Product Name	Price per L/Kg	Excl. Tax
- +	Klüber HOTEMP PLUS 200 L	€66,85	€13.370,40
- +	Klüber HOTEMP PLUS 20 L	€75,98	€1.519,50
- +	Klüber HOTEMP PLUS 5 L	€151,85	€759,23

Total €0,00

Pay online or by invoice (within 30 days)

Overview

Klüber HOTEMP PLUS

High-temperature chain oil

Application Klüber HOTEMP PLUS

HOTEMP PLUS is suitable for all oil-lubricated stenter chains such as – roller chains, – chains or clips with ball bearings in cases of combined lubrication of bearings, chain joints and slide ways, and – slide chains with lubrication of slide rails, chain joints and bolts in equalizing frames, single-layer stenters, tier stenters, festoon driers and steamers as well as installations.

Details

Performance, Features & Benefits of Klüber HOTEMP PLUS are:

Efficient lubrication even at high operating temperatures
Good regeneration effect on used oil
Favourable viscosity-temperature properties for safe cold starts
Outstanding penetration properties for rapid formation of the lubricating film
Good adhesion, no throwing off
Resistance to wear and pressure
Little residue owing to fully synthetic constituents
Efficient against the settling of finishing and softening compounds and their condensates at the point of friction

If you have any questions, please contact OilOnline Technical Helpdesk

Product Description Klüber HOTEMP PLUS

HOTEMP PLUS is a synthetic high-temperature chain oil for textile and plastic processing machines ensuring reliable operation even at high temperature and stress. It creeps very well and thus rapidly forms a lubricating film. Its specific additive combination makes HOTEMP PLUS is highly resistant to pressure and wear. Special adhesion improvers prevent the oil being thrown off the lubrication point. HOTEMP PLUS is very efficient against the settling of finishing and softening compounds and their condensates at the point of friction. The few residues created by synthetic constituents are easy to regenerate by adding fresh oil.

Typical Characteristics

Product specifications :		Klüber HOTEMP PLUS
Article number		002086
Chemical composition, type of oil		ester oil
Chemical composition, type of oil		synthetic hydrocarbon oil
Upper service temperature		250 °C / 482 °F
Appearance		clear
Colour space		green
Density, 20 °C	DIN 51757	approx. 0.95 g/cm³
Kinematic viscosity, 40 °C	DIN 51562 pt. 01/ASTM D-445/ASTM D 7042	approx. 320 mm²/s
Kinematic viscosity, 100 °C	DIN 51562 pt. 01/ASTM D-445/ASTM D 7042	approx. 28 mm²/s
Viscosity index,	DIN ISO 2909	>= 110
Flash point, Cleveland, open-cup apparatus	DIN EN ISO 2592	>= 220 °C
Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx.		60 months

Application notes

HOTEMP PLUS can be applied with all common pumps, spraying or metering equipment. Lubrication intervals and quantities vary with chain design, type of lubrication and operating conditions. At temperatures above 180 °C, you need approx. 1.5 to 2 ml of oil per meter of chain and operating shift. Chain rails should be lubricated continuously or once a day at a maximum, depending on length of travel and design. Weekly relubrication is often sufficient for chain pins with an oil depot. However, it is better to apply an exact dosage of oil every day than relubricate too late or over-lubricate, especially at high chain speeds. Chains with a spray lubrication system should be lubricated very sparingly once per shift or day to keep them just oil-moist.

Product Questions

Customer Questions