7 warehouses in Europe
Klüber Isoflex PDB 38 CX 2000
97% supplied in 5 working days
Shipping costs for all EU countries are calculated at checkout.
VAT number required
during checkout
Pay online or by invoice (within 30 days)
Klüber Isoflex PDB 38 CX 2000
Impregnating fluid
Application Klüber Isoflex PDB 38 CX 2000
ISOFLEX PDB 38 CX 2000 was especially developed as an impregnating fluid for metals of all groups used in sintered bearings where uniform operation and low friction are essential, e.g. in audio and video equipment.
Performance, Features & Benefits of Klüber Isoflex PDB 38 CX 2000 are:
- Impregnating fluid
- Suitable for low temperatures
- Good wear protection
- Good wetting properties
- Reduced heating-up of bearing
- Noise-dampening
- Low starting and running torques
If you have any questions, please contact OilOnline Technical Helpdesk
Product Description Klüber Isoflex PDB 38 CX 2000
ISOFLEX PDB 38 CX 2000 is a homogeneous impregnating fluid for sintered-metal sliding bearings consisting of ester oil, mineral oil and lithium soap. It is resistant to ageing and oxidation, offers good corrosion protection and can be used at low temperatures.
Typical Characteristics
| Product specifications | Method |
Klüber Isoflex PDB 38 CX 2000 |
|
| Article number | 004092 | ||
| Upper service temperature | 120 °C / 248 °F | ||
| Lower service temperature | -60 °C / -76 °F | ||
| Texture | homogeneous | ||
| Texture | liquid | ||
| Colour space | yellow | ||
| Density | 20°C | approx. 0.92 g/cm³ | |
| Kinematic viscosity of the base oil | 40 °C | DIN 51562 pt. 01/ASTM D-445/ASTM D 7042 | approx. 13 mm²/s |
| Kinematic viscosity of the base oil | 100°C | DIN 51562 pt. 01/ASTM D-445/ASTM D 7042 | approx. 3.5 mm²/s |
| Copper corrosion, (lubricating grease), 24h/100°C | DIN 51811 | 2 - 100 corrosion degree | |
| Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx. |
12 months |
Application notes
Impregnation and other commonly used application techniques. The pores of sintered-metal sliding bearings are to be impregnated in a vacuum. Due to the large variety of different elastomers and plastics, their compatibility with the fluid has to be checked prior to series application.
Satisfied customers:
Quality brands only
genuine packages
Save costs
take control of your costs
save time and money
Global Deliveries
sea containers
air freight worldwide
