7 warehouses in Europe
Klüber ISOFLEX SUPER LDS 18
97% supplied in 5 working days
Shipping costs for all EU countries are calculated at checkout.
VAT number required
during checkout
Pay online or by invoice (within 30 days)
Klüber ISOFLEX SUPER LDS 18
High-speed and smooth-running grease
Application Klüber ISOFLEX SUPER LDS 18
ISOFLEX SUPER LDS 18 is suitable for plain and rolling bearings, small, miniature and precision bearings, for precision mechanical and optical equipment and low-temperature applications. It can also be used as an anti-corrosion and anti-wear lubricant in electrical contacts. Properly applied, ISOFLEX SUPER LDS 18 protects against corrosion and oxidation, improves sliding properties and reduces wear, e.g. in sliding contacts and potentiometers.
Performance, Features & Benefits of Klüber ISOFLEX SUPER LDS 18 are:
- Low running torque enables energy savings, particularly at low temperatures
- Smooth-running grease for high performance
- Long service life due to good corrosion protection as well as ageing and oxidation stability, hence cost savings possible
- Low heating-up of bearings due to low lubricant friction leading to longer service lives
If you have any questions, please contact OilOnline Technical Helpdesk
Product Description Klüber ISOFLEX SUPER LDS 18
ISOFLEX SUPER LDS 18 is a low-noise, high-speed grease for plain and rolling bearings. It consists of ester oil, mineral oil and lithium soap. It protects against corrosion and is resistant to ageing and oxidation.
Typical Characteristics
| Product specifications : | Klüber ISOFLEX SUPER LDS 18 | |
| Article number | 004024 | |
| Chemical composition, type of oil | mineral oil | |
| Chemical composition, type of oil | ester oil | |
| Chemical composition, thickener | lithium soap | |
| Lower service temperature | -50 °C / -58 °F | |
| Upper service temperature | 120 °C / 248 °F | |
| Colour space | yellow | |
| Texture | short-fibred | |
| Texture | homogeneous | |
| Density at 20 °C | approx. 0.90 g/cm³ | |
| Worked penetration, 25 °C, lower limit value | DIN ISO 2137 | 265 x 0.1 mm |
| Worked penetration, 25 °C, upper limit value | DIN ISO 2137 | 295 x 0.1 mm |
| Kinematic viscosity of the base oil, 40 °C | DIN 51562 pt. 01/ASTM D-445/ASTM D 7042 | approx. 15.5 mm²/s |
| Kinematic viscosity of the base oil, 100 °C | DIN 51562 pt. 01/ASTM D-445/ASTM D 7042 | approx. 3.5 mm²/s |
| Shear viscosity at 25 °C, shear rate 300 s-1, equipment: rotational viscometer, lower limit value | 2 000 mPas | |
| Shear viscosity at 25°C, shear rate 300 s-1, equipment:rotational viscometer, upper limit value | 3 400 mPas | |
| Corrosion inhibiting properties of lubricating greases, (SKF-EMCOR), test duration: 1 week, distilled water |
DIN 51802 | 0 corrosion degree |
| Flow pressure of lubricating greases, test temperature: -50 °C | DIN 51805-2 | <= 1 400 mbar |
| Drop point, | DIN ISO 2176, IP 396 | >= 190 °C |
| Speed factor (n x dm) | 1 000 000 mm/min | |
| Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx. |
36 months |
Application notes
The lubricant is applied by brush, spatula, or grease gun. Owing to the different compositions of elastomers and plastic materials, compatibility tests are indispensable before series application.
Satisfied customers:
Quality brands only
genuine packages
Save costs
take control of your costs
save time and money
Global Deliveries
sea containers
air freight worldwide
