Klüber isoflex Topas L 32 N 0.4Kg

Skip to the end of the images gallery

Skip to the beginning of the images gallery

97% supplied in 5 working days

Shipping Rate

No VAT within the EU

Pay online or by invoice (within 30 days)

Overview

ISOFLEX TOPAS L 32 N

Special low-temperature greases

Most important applications of ISOFLEX TOPAS L 32 N are:

+ Designed for extremely low temperatures
+ Long Life grease
+ Contains a UV indicator

ISOFLEX TOPAS L 32 N are especially used for the lubrication of small gears used in automotive engineering for electrical adjustment mechanisms, e.g. window lifters, sun roofs, seats, headlamps, fan flaps.

Details

Application ISOFLEX TOPAS L 32 N

ISOFLEX TOPAS L 32 N is especially used for the lubrication of small gears used in automotive engineering for electrical adjustment mechanisms, e.g. window lifters, sunroofs, seats, headlamps, fan flaps.

ISOFLEX TOPAS L 32 and L 32 N can also be used for:

Guideways, Bowden cables, door locks
rolling bearings in small motors, fans, pumps
tooth flanks in plastic/plastic gears (e.g. POM, PA and PBT) or plastic/steel material combinations.

ISOFLEX TOPAS L 32 N is approved by renowned car manufacturers, such as

+ Volkswagen VW TL 778 A
+ Daimler DBL 6827.40 and
+ Daimler DBL 6827.41

Benefits for your application Isoflex Topas L 32 N

Exceed OEM requirements of -40°C
Long service life due to high corrosion protection and resistance to oxidation and ageing
Many years of successful use in the automotive industry (specified and approved by most car manufacturers and component suppliers worldwide)

Application notes and Pack size 1 kilo

The lubricant is applied by spatula, brush, grease gun or cartridge.

Typical characteristics

Product data			Method	ISOFLEX TOPAS L 32 N
Colour space	-	-	-	beige
Texture	-	-	-	short-fibred
Texture	-	-	-	homogeneous
Density	at 20 °C	-	-	approx. 0.86 g/cm³
NLGI grade	-	-	DIN 51818	2
Worked penetration lower limit value	25 °C	-	DIN ISO 2137	265 x 0.1 mm
Worked penetration upper limit value	25 °C	-	DIN ISO 2137	295 x 0.1 mm
Kinematic viscosity	40 °C	-	DIN 51562 pt. 01/ASTM D-445/ASTM D 7042	approx. 17 mm²/s
Kinematic viscosity	100°C	-	DIN 51562 pt. 01/ASTM D-445/ASTM D 7042	approx. 3.8 mm²/s
Shear viscosity shear rate 300 s-1, equipment: rotational viscometer, lower limit value	25°C	-	-	2 000 mPas
Shear viscosity shear rate 300 s-1, equipment:rotational viscometer, upper limit value	25°C	-	-	4 500 mPas
Flow pressure of lubricating greases test temperature:	-35°C	-	DIN 51805/DIN ISO 2176	<= 450 mbar Drop point
Speed factor	-	(n x dm)	-	1 000 000 mm/min
Water resistance	90°C	-	DIN 51807 pt. 01, 3 h/90 °C, rating	<= 1 - 90
Corrosion inhibiting properties of lubricating greases (SKF- EMCOR), test duration: 1 week, distilled water	-	-	DIN 51802	<= 1 corrosion degree
Minimum durability from the date of manufacture - in a dry, frost-free place and in the unopened original container	ca	-	-	36 months