Klüber isoflex Topas L 32 N 1Kg
97% supplied in 5 working days
Shipping costs for all EU countries are calculated at checkout.
VAT number required
during checkout
Pay online or by invoice (within 30 days)
ISOFLEX TOPAS L 32 N
Special low-temperature greases
Most important applications of ISOFLEX TOPAS L 32 N are:
- + Designed for extremely low temperatures
- + Long Life grease
- + Contains a UV indicator
ISOFLEX TOPAS L 32 N are especially used for the lubrication of small gears used in automotive engineering for electrical adjustment mechanisms, e.g. window lifters, sun roofs, seats, headlamps, fan flaps.
Application ISOFLEX TOPAS L 32 N
ISOFLEX TOPAS L 32 N is especially used for the lubrication of small gears used in automotive engineering for electrical adjustment mechanisms, e.g. window lifters, sunroofs, seats, headlamps, fan flaps.
ISOFLEX TOPAS L 32 and L 32 N can also be used for:
- Guideways, Bowden cables, door locks
- rolling bearings in small motors, fans, pumps
- tooth flanks in plastic/plastic gears (e.g. POM, PA and PBT) or plastic/steel material combinations.
ISOFLEX TOPAS L 32 N is approved by renowned car manufacturers, such as
- + Volkswagen VW TL 778 A
- + Daimler DBL 6827.40 and
- + Daimler DBL 6827.41
Benefits for your application Isoflex Topas L 32 N
- Exceed OEM requirements of -40°C
- Long service life due to high corrosion protection and resistance to oxidation and ageing
- Many years of successful use in the automotive industry (specified and approved by most car manufacturers and component suppliers worldwide)
Application notes and Pack size 1 kilo
The lubricant is applied by spatula, brush, grease gun or cartridge.
Typical characteristics
Product data | Method | ISOFLEX TOPAS L 32 N | ||
Colour space | - | - | - | beige |
Texture | - | - | - | short-fibred |
Texture | - | - | - | homogeneous |
Density | at 20 °C | - | - | approx. 0.86 g/cm³ |
NLGI grade | - | - | DIN 51818 | 2 |
Worked penetration lower limit value | 25 °C | - | DIN ISO 2137 | 265 x 0.1 mm |
Worked penetration upper limit value | 25 °C | - | DIN ISO 2137 | 295 x 0.1 mm |
Kinematic viscosity | 40 °C | - | DIN 51562 pt. 01/ASTM D-445/ASTM D 7042 | approx. 17 mm²/s |
Kinematic viscosity | 100°C | - | DIN 51562 pt. 01/ASTM D-445/ASTM D 7042 | approx. 3.8 mm²/s |
Shear viscosity shear rate 300 s-1, equipment: rotational viscometer, lower limit value | 25°C | - | - | 2 000 mPas |
Shear viscosity shear rate 300 s-1, equipment:rotational viscometer, upper limit value | 25°C | - | - | 4 500 mPas |
Flow pressure of lubricating greases test temperature: | -35°C | - | DIN 51805/DIN ISO 2176 | <= 450 mbar Drop point |
Speed factor | - | (n x dm) | - | 1 000 000 mm/min |
Water resistance | 90°C | - | DIN 51807 pt. 01, 3 h/90 °C, rating | <= 1 - 90 |
Corrosion inhibiting properties of lubricating greases (SKF- EMCOR), test duration: 1 week, distilled water | - | - | DIN 51802 | <= 1 corrosion degree |
Minimum durability from the date of manufacture - in a dry, frost-free place and in the unopened original container | ca | - | - | 36 months |
Satisfied customers:
Quality brands only
genuine packages
Save costs
take control of your costs
save time and money
Global Deliveries
sea containers
air freight worldwide