7 warehouses in Europe
Klüber Klüberalfa DH 3-230
97% supplied in 5 working days
Shipping costs for all EU countries are calculated at checkout.
VAT number required
during checkout
Pay online or by invoice (within 30 days)
Klüber Klüberalfa DH 3-230
High-temperature lubricating oils for sintered metal plain bearings and plastic components
Application Klüberalfa DH 3-230
Sintered metal components Klüberalfa DH 3 oils are used for the impregnation of sintered metal plain bearings subject to high temperatures where longterm lubrication is required. Due to their high thermal and chemical stability, additional lubrication with, for example, MIKROZELLA is normally not necessary. Plastic components Klüberalfa DH 3 oils are suitable for the lubrication of both plastic components and metal-plastic sliding contact surfaces. These clear, colourless and odourless oils do not form unwanted resins. Klüberalfa DH 3 oils are generally regarded as neutral towards elastomers and plastics (possible exception: perfluorinated rubber), so no negative effect on the material is to be expected. Nevertheless compatibility with the materials should be tested, especially prior to series application.
Performance, Features & Benefits of Klüber Klüberalfa DH 3-230 are:
- Long component life across a wide service temperature range – due to excellent thermal and chemical stability
- Many component materials can be used – due to the good compatibility with plastics and elastomers
If you have any questions, please contact OilOnline Technical Helpdesk
Product Description Klüber Klüberalfa DH 3-230
Klüberalfa lubricants, based on perfluorinated polyether (PFPE), were developed to fulfil lifetime lubrication under demanding conditions and offer a number of characteristics that make them highly suitable for such tasks. Klüberalfa DH 3 oils contain a PFPE oil mixture with excellent thermal stability and low evaporation rate. They are available with different viscosities to cover various temperature ranges.
Typical Characteristics
| Product specifications | Method |
Klüber Klüberalfa DH 3-230 |
|
| Article number | 090140 | ||
| NSF-H1 registration | |||
| Chemical composition, type of oil | PFPE | ||
| Lower service temperature | -25 °C / -13 °F | ||
| Upper service temperature | 230 °C / 446 °F | ||
| Density | 20°C | DIN 51757 | approx. 1.91 g/cm³ |
| Refraction index | 20°C | DIN 51423 pt. 02 | approx. 1.302 |
| Kinematic viscosity | 40°C | DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, | approx. 230 mm²/s |
| Kinematic viscosity | 100°C | DIN 51562 pt. 01/ASTM D-445/ ASTM D 7042, |
approx. 24 mm²/s |
| Viscosity index | DIN ISO 2909 | >= 120 | |
| Pour point | DIN ISO 3016 | <= -30 °C | |
| Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx. | 60 months |
Application notes
Sintered metal components are impregnated by immersion in the Klüberalfa DH 3 oil. The oil bath can be heated up to a maximum of 80 °C, during which the immersion tank is subjected to a low vacuum of 0.1 to 0.001 bar, accelerating penetration. The sintered-metal component is completely filled with oil when no more air bubbles are expelled to the oil surface.
Satisfied customers:
Quality brands only
genuine packages
Save costs
take control of your costs
save time and money
Global Deliveries
sea containers
air freight worldwide
You may also be interested in
-
![Klüber Klüberalfa DH 3-350 N]()
Klüber Klüberalfa DH 3-350 NStarting at: € 107,29 -
![Klüberalfa DH 3-100]()
Klüber Klüberalfa DH 3-100Starting at: € 736,99 -
![Klüber Klüberalfa DH 3-150]()
Klüber Klüberalfa DH 3-150Starting at: € 783,08
