7 warehouses in Europe
Klüber Klüberbio AG 39-602
97% supplied in 5 working days
Shipping costs for all EU countries are calculated at checkout.
VAT number required
during checkout
Pay online or by invoice (within 30 days)
Klüber Klüberbio AG 39-602
Environmentally acceptable adhesive lubricant for open gears and steel cables
Application Klüber Klüberbio AG 39-602
Klüberbio AG 39-602 was developed for the lubrication of open pinion gears on winches and jack-up platforms, as well as steel cables in contact with water. The product can also be used in other maritime applications that require lubricants to have good water washout resistance, very good anti-corrosion resistance and/or good load-carrying capacity such as with low-speed plain bearings, guide rails and open winch gears.
Performance, Features & Benefits of Klüber Klüberbio AG 39-602 are:
- Complies with the requirements for Environmentally Acceptable Lubricants as defined in Appendix A of the 2013 Vessel General Permit
- Reduced environmental impact in the event of discharge into water. The base oil is derived from renewable resources
- Good adhesion and water resistance for long relubrication intervals
- Selected additives ensure longer component life and reduced wear
- Corrosion protection under seawater influence due to especially selected anti-corrosion additives
If you have any questions, please contact OilOnline Technical Helpdesk
Product Description Klüber Klüberbio AG 39-602
Klüberbio AG 39-602 is an adhesive lubricant for open gears and steel cables based on ester oil and selected additives. Klüberbio AG 39-602 contains > 60 % of renewable raw materials. Their biodegradability acc. to OECD 301 F is ≥ 60 % after 28 days. Klüberbio AG 39-602 contributes to long component life and good corrosion and wear protection. The finished product meets the biodegradability, minimally toxic and nonbioaccumulative standards established by the US EPA for the 2013 Vessel General Permit. With its good adhesion to surfaces, Klüberbio AG 39-602 leads to reduced lubricant consumption and reduced labour costs.
Typical Characteristics
| Product specifications : | Klüber Klüberbio AG 39-602 | |
| Article number | 009042 | |
| Chemical composition, type of oil | ester oil | |
| Chemical composition, thickener | calcium soap | |
| Lower service temperature | -20 °C / -4 °F | |
| Upper service temperature | 100 °C / 212 °F | |
| Colour space | yellow | |
| Texture | homogeneous | |
| Texture | fibrous | |
| Density at 20 °C | approx. 0.97 g/cm³ | |
| Worked penetration, 25 °C, lower limit value | DIN ISO 2137 | 290 x 0.1 mm |
| Worked penetration, 25 °C, upper limit value | DIN ISO 2137 | 330 x 0.1 mm |
| Kinematic viscosity of the base oil, 40 °C | DIN 51562 pt. 01/ASTM D-445/ASTM D 7042 | approx. 600 mm²/s |
| Kinematic viscosity of the base oil, 100 °C | DIN 51562 pt. 01/ASTM D-445/ASTM D 7042 | approx. 85 mm²/s |
| Copper corrosion, (lubricating grease), 24h/100°C | DIN 51811 | 1 - 100 corrosion degree |
| Corrosion inhibiting properties of lubricating greases, (SKF-EMCOR), test duration: 1 week, distilled water |
DIN 51802 | <= 1 corrosion degree |
| Oil separation, after 7 d/40 °C | DIN 51817 N | <= 5 % by weight |
| Flow pressure of lubricating greases, test temperature: -20 °C | DIN 51805 | <= 1 400 mbar |
| Drop point, | DIN ISO 2176, IP 396 | >= 120 °C |
| Four-ball tester, welding load, | DIN 51350 pt. 04 | >= 3 400 N |
| Biodegradability according to OECD 301 F, (within 28 days) | >= 60 % | |
| Water resistance, 3 h/90 °C, rating | DIN 51807 pt. 01 | 0 - 90 |
| FZG scuffing test, based on scuffing load stage | DIN ISO 14635, A/2,76/50 | >= 12 |
| Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx. |
36 months |
Application notes
Klüberbio AG 39-602 can be applied continuously through transfer lubrication with pinion or by brush. Compressed-air lubrication equipment can be used for the lubrication of steel cables. The required lubricant quantity depends on the operating conditions in each individual case. Our Sales Engineers will be glad to assist you in determining the correct quantity for your application. Please note that the colour of Klüberbio AG 39-602 changes to red under the influence of UV radiation. This does not impair the lubricating grease's effectiveness.
Satisfied customers:
Quality brands only
genuine packages
Save costs
take control of your costs
save time and money
Global Deliveries
sea containers
air freight worldwide
