Klüber Klüberbio EG 2-150
97% supplied in 5 working days
Shipping costs for all EU countries are calculated at checkout.
VAT number required
during checkout
Pay online or by invoice (within 30 days)
Klüber Klüberbio EG 2-150
Environmentally compatible, synthetic high-performance gear oils
Application Klüber Klüberbio EG 2-150
Klüberbio EG 2 oils were developed for the lubrication of ships’ gearboxes, particularly for thrusters and rudder propellers. Leading manufacturers of thrusters and propeller shaft seals have tested and approved these oils. Please contact Klüber Lubrication or the manufacturer of the seal or thruster for technical consultation on your specific seallubricant combination. Klüberbio EG 2 oils protect rolling elements effectively against wear and pitting, thus complying with the requirements of rolling bearing manufacturers for highly loaded, large rolling bearings in pod drives. Klüberbio EG 2-68, 100 and 320 oils can also be used for the lubrication of open-running drive and conveyor chains, e.g. in installations and machines in agriculture, forestry and water resources industries as well as for horticultural appliances.
Performance, Features & Benefits of Klüber Klüberbio EG 2-150 are:
- Comply with the requirements for Environmentally Acceptable Lubricants as defined in Appendix A of the EPA 2013 VGP (Vessel General Permit)
- Ultimately biodegradable and not toxic to marine organisms reducing environmental impact in the event of leakage
- Klüberbio EG 2 oils have a high scuffing resistance, protecting gear teeth reliably against fretting damage even at high peak loads
- Standard NBR and FKM elastomers of the leading propeller shaft seal manufacturers are resistant to and approved for use with Klüberbio EG 2 oils, preventing leakages and impurities
If you have any questions, please contact OilOnline Technical Helpdesk
Product Description Klüber Klüberbio EG 2-150
Klüberbio EG 2 oils are ultimately biodegradable gear oils based on synthetic ester oil. They contain ≥90 % of renewable raw materials and achieve the U.S. EPA's requirements for classification as an Environmentally Acceptable Lubricant (EAL). Therefore, these high-performance lubricants meet the biodegradability, minimally toxic, and non-bioaccumulating standards set in Appendix A of the U.S. EPA's 2013 VGP (Vessel General Permit). Klüberbio EG 2-150 also complies with the European Ecolabel. The EU Ecolabel is a label of environmental excellence that is awarded to products and services meeting high environmental standards throughout their life-cycle: from raw material extraction, to production, distribution and disposal. Klüberbio EG 2 oils show a high shear stability and form a strong hydrodydamic oil film even when subject to high loads. They have a high scuffing resistance, protecting gear teeth reliably against fretting damage even at high peak loads.
Typical Characteristics
Product specifications : | Klüber Klüberbio EG 2-150 | |
Article number | 009030 | |
Classification acc. to CLP -DIN 51517-3 | corresponds to | |
EU Ecolabel registration number | DE/027/260 | |
Marking acc. to DIN 51502 | CLP E 150 | |
Lower service temperature | -25 °C / -13 °F | |
Upper service temperature | 120 °C / 248 °F | |
Density, based on DIN 51757) at 15 °C | approx. 927 kg/ m³ |
|
Foam test, sequence I/24 °C | ASTM-D 892, ISO 6247 | <= 100/10 ml |
Foam test, sequence II/ 93.5 °C |
ASTM-D 892, ISO 6247 | <= 100/10 ml |
Foam test, sequence III/24°C | ASTM D 892, ISO 6247 | <= 100/10 ml |
Flash point, Cleveland, open-cup apparatus |
DIN EN ISO 2592 | >= 280 °C |
Biodegradability according to OECD 301 F, (within 28 days) |
>= 60 % | |
Kinematic viscosity, 40 °C | DIN 51562 pt. 01/ASTM D-445/ ASTM D 7042 |
approx. 150 mm²/s |
Kinematic viscosity, 100 °C | DIN 51562 pt. 01/ASTM D-445/ ASTM D 7042 |
approx. 18 mm²/ s |
ISO viscosity grade, | DIN ISO 3448 | 150 |
Viscosity index, | DIN ISO 2909 | approx. 135 |
Anticorrosive properties on steel, method A, steel, 24 h/60 °C |
DIN ISO 7120 | no rust corrosion degree |
Copper corrosion, 24 h/100°C | DIN EN ISO 2160 | 1 - 100 corrosion degree |
Pour point, | DIN ISO 3016 | <= -25 °C |
FZG scuffing test, A/8.3/90, scuffing load stage |
DIN ISO 14635-1 | > 13 |
Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx. |
36 months |
Application notes
In general, our completely biodegradable high-performance gear oils are miscible with mineral oils and synthetic hydrocarbons. However, a miscibility test should be performed in order to totally rule out the possibility of an incompatibility between different additives. Prior to changeover, we recommend cleaning the lube points or flushing the gear with the Klüberbio EG 2 oil to be used. The Klüberbio EG 2 oil to be used needsto be approved by the OEMs of the equipment. In case the oil is not approved or the equipment's specification has been changed - e.g. type, design or material of the sealing - we recommend consulting the OEM prior to the oil change. Owing to the many different elastomer compositions of seals we recommend - prior to series application - checking the compatibility and other influencing factors (e.g. maximum admissible water content in the oil) with the component under conditions similar to practice.
Satisfied customers:
Quality brands only
genuine packages
Save costs
take control of your costs
save time and money
Global Deliveries
sea containers
air freight worldwide
You may also be interested in
- Klüber Klüberbio EG 2-100Starting at: € 26,93 / L
- Klüber Klüberbio EG 2-68Starting at: € 26,93 / L
- Total Carter BIO 150Starting at: € 9,61 / L
- Shell Naturelle S4 Gear Fluid 150€ 15,78 / L