7 warehouses in Europe
Klüber Klüberfluid B-F 1 Ultra
97% supplied in 5 working days
Shipping costs for all EU countries are calculated at checkout.
VAT number required
during checkout
Pay online or by invoice (within 30 days)
Klüber Klüberfluid B-F 1 Ultra
Running-in lubricant for open drives
Application Klüber Klüberfluid B-F 1 Ultra
Klüberfluid B-F 1 Ultra is used in the splash, paddle wheel or circulation lubrication of open gears for running-in lubrication or tooth profile correction. Possible uses are limited neither by component size nor by driving power. The peripheral speed should not exceed 8.5 m/s. Drives of this kind are mainly used in rotary kilns, tube mills, and similar machines as are used in the cement, lime, gypsum, mining and chemical industries. Klüberfluid B-F 1 Ultra is not suitable for the lubrication of (rolling or sliding) bearings.
Performance, Features & Benefits of Klüber Klüberfluid B-F 1 Ultra are:
- Running-in and corrective lubricant for open drives with splash or circulation lubrication
- Free from heavy metals, solvents, bitumen, and chlorine
- Easy application
- Controlled wear for tooth face correction
If you have any questions, please contact OilOnline Technical Helpdesk
Product Description Klüber Klüberfluid B-F 1 Ultra
Klüberfluid B-F 1 Ultra is a mineral oil based aluminium stearate saponified running-in lubricant especially designed for splash or circular lubrication. A specific combination of additives including special graphite allows controlled running-in of new, or smoothening of damaged, tooth profiles while protecting the remaining tooth faces. The longer this lubricant is applied the less wear occurs. Klüberfluid B-F 1 Ultra is a non-Newtonian fluid free from bitumen, solvents, heavy metals, and chlorine. In accordance with AGMA 251.02, Klüberfluid B-F 1 Ultra is classified among the "Special Compounds" (sect. 3.4). The specifications of table 6, "Extreme Pressure Gear Lubricants", are fully satisfied.
Typical Characteristics
| Product specifications | Method |
Klüber Klüberfluid B-F 1 Ultra |
|
| Article number | 039073 | ||
| Colour space | black | ||
| Texture | homogeneous | ||
| Texture | fluid | ||
| Density | 20°C | approx. 1.01 g/cm³ | |
| Worked penetration, acc. to Klein, lower limit value | 25 °C | 470 x 0.1 mm | |
| Worked penetration, acc. to Klein, upper limit value | 25°C | 530 x 0.1 mm | |
| Kinematic viscosity of the base oil | 40°C | DIN 51562 pt. 01/ASTM D-445/ASTM D 7042 | approx. 1 300 mm²/s |
| Kinematic viscosity of the base oil, | 100°C | DIN 51562 pt. 01/ASTM D-445/ASTM D 7042 | approx. 60 mm²/s |
| Application by immersion bath | 0 - 100 °C | ||
| Application in circulation lubrication systems | 10 - 80 °C | ||
| Functional lubricant film | approx. - 30 °C | ||
| Thermal stability of the lubricating film | approx. 200 °C | ||
| FZG scuffing test, based on A/2.76/50, change in weight | DIN ISO 14635 | approx. 1 mg/kWh | |
| FZG scuffing test, based on A/2,76/50, scuffing load stage | DIN ISO 14635 | >= 12 | |
| Four-ball tester, welding load | DIN 51350 pt. 04 | >= 7 500 N | |
| Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx. |
24 months |
Application notes
Klüberfluid B-F 1 Ultra can either be filled into the immersion bath so that lubrication is done by direct transfer of the lubricant to the tooth faces or if you have a circular lubrication system the lubricant is force-pumped onto the tooth faces.
Satisfied customers:
Quality brands only
genuine packages
Save costs
take control of your costs
save time and money
Global Deliveries
sea containers
air freight worldwide
You may also be interested in
-
![Klüber Klüberfluid B-F 2 Ultra]()
Klüber Klüberfluid B-F 2 UltraStarting at: € 32,74 / Kg
