Klüber Klüberfluid C-F 4 Ultra
97% supplied in 5 working days
Shipping costs for all EU countries are calculated at checkout.
VAT number required
during checkout
Pay online or by invoice (within 30 days)
Klüber Klüberfluid C-F 4 Ultra
Transparent operational lubricant for large open gear drives
Application Klüber Klüberfluid C-F 4 Ultra
Klüberfluid C-F 4 Ultra can be applied by immersion, transfer paddle wheel, pressure fed circulation and spray lubrication systems. It can be used with all gear sizes and power ratings. A peripheral speed of 7 m/s should however not be exceeded. Open gear drives are found in rotary kilns, tube mills, drums and similar machinery used in the cement, lime, gypsum, mining and chemical industries as well as in power stations. It can also be used for medium-size to large girth gear drives in sugar and paper production as well as in the marine and offshore sector.
Performance, Features & Benefits of Klüber Klüberfluid C-F 4 Ultra are:
- Transparent product – immediate inspection results during operation
- Fluorescent lubricant film – verifying the presence of a lubricating film
- Vibration damping – increased component lifetime
- Temperature decrease – increased component lifetime
- Permanent fluidity – no accumulation of used grease in the guarding
- Less used-grease disposal – cost cuts of up to 50 %
- Lower quantities needed – substantial cost cuts of approx. 20 – 25 % compared to graphite-containing greases
If you have any questions, please contact OilOnline Technical Helpdesk
Product Description Klüber Klüberfluid C-F 4 Ultra
Klüberfluid C-F 4 Ultra is a newly developed lubricant especially for the lubrication of medium-size to large girth gear drives. It is based on a mixture of synthetic hydrocarbons and mineral oil. Klüberfluid C-F 4 Ultra provides good adhesion, resistance to high pressure and wear protection. It is suitable for use at component temperatures up to 110 °C. No bitumen, heavy metals, chlorine or solvents are contained in the formulation of this lubricant. However, we cannot rule out the possibility that the lubricant contains traces of bitumen, heavy metals, chlorine or solvents. Depending on the application, we recommend consulting with us. The properties of Klüberfluid C-F 4 Ultra correspond to ANSI/ AGMA 9005-E02 table D-1.
Typical Characteristics
Product specifications | Method |
Klüber Klüberfluid C-F 4 Ultra |
|
Article number | 039071 | ||
Colour space | brown | ||
Texture | very viscous | ||
Texture | homogeneous | ||
Density | 20 °C | DIN 51757 | approx. 0.93 g/cm³ |
Kinematic viscosity | 40°C | DIN 51562 pt. 01/ASTM D-445/ASTM D 7042 | approx. 3 100 mm²/s |
Kinematic viscosity, | 100°C | DIN 51562 pt. 01/ASTM D-445/ASTM D 7042 | approx. 165 mm²/s |
Application in automatic spray systems | approx. 0 - 80 °C | ||
Application by immersion bath | approx. 0 - 110 °C | ||
Application in circulation lubrication systems | approx. 0 - 80 °C | ||
Functional lubricant film | approx. -30 °C | ||
Thermal stability of the lubricating film | <= 110 °C | ||
Viscosity index | DIN ISO 2909 | approx. 155 | |
Pour point | DIN ISO 3016 | <= -5 °C | |
Flash point, Cleveland, open-cup apparatus | DIN EN ISO 2592 | >= 190 °C | |
FZG scuffing test, A/8.3/90, change in weight | DIN ISO 14635-1 | <= 0.2 mg/kWh | |
FZG scuffing test, A/8.3/90, scuffing load stage | DIN ISO 14635-1 | > 12 | |
Four-ball EP tester, welding load | DIN 51350 part 2 | >= 7 000 N | |
Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx. |
36 months |
Application notes
When applied by immersion, Klüberfluid C-F 4 Ultra is transferred directly onto the tooth flanks whenever either the pinion or the gear rim dips into the lubricant. A circulation lubrication system can also be employed to recirculate the filtered lubricant under pressure onto the loadbearing tooth flanks of the pinion. Depending on the system type, Klüberfluid C-F 4 Ultra may also be applied via other customary spray systems. The lubricant film on the tooth flanks can be made visible by using a UV lamp of at least 366 nm.
Satisfied customers:
Quality brands only
genuine packages
Save costs
take control of your costs
save time and money
Global Deliveries
sea containers
air freight worldwide
You may also be interested in
- Klüber Klüberfluid C-F 3 UltraStarting at: € 26,71 / Kg
- Klüber Klüberfluid C-F 8 Ultra€ 31,21 / Kg
- Klüber Klüberfluid C-F 3 M UltraStarting at: € 32,30 / Kg
- Klüber Klüberfluid C-F 3 S UltraStarting at: € 27,88 / Kg
- Klüber Klüberfluid C-F 5 UltraStarting at: € 39,66 / Kg
- Klüber Klüberfluid C-F 7 UltraStarting at: € 36,02 / Kg