Klüber Klüberfluid D-F 1 Ultra
97% supplied in 5 working days
Shipping costs for all EU countries are calculated at checkout.
VAT number required
during checkout
Pay online or by invoice (within 30 days)
Klüber Klüberfluid D-F 1 Ultra
Repair lubricant for open girth gear drives
Application Klüber Klüberfluid D-F 1 Ultra
Klüberfluid D-F 1 ULTRA was specially developed for repair lubrication of damaged open gears. It is also highly suitable for rapid running-in of new or newly aligned gear sets such as those used with rotary kilns, tube kilns and winches, for example in the cement industry, power generation, mining, chemical industry, paper and sugar industry as well as the marine sector.
Performance, Features & Benefits of Klüber Klüberfluid D-F 1 Ultra are:
- Correction and repair lubricant for large open gear drives
- Ready-to-use product
- Suitable for application under full load conditions
- No cleaning of gears required after use
- Low consumption rate
- Free from solvents, bitumen, heavy metals, chlorine, graphite and MoS2
- Light-coloured, transparent formulation
If you have any questions, please contact OilOnline Technical Helpdesk
Product Description Klüber Klüberfluid D-F 1 Ultra
Klüberfluid D-F 1 ULTRA is a running-in and repair lubricant suitable for manual spray application. It is based on mineral oil thickened with lithium soap and contains special additives. Klüberfluid D-F 1 ULTRA is resistant to high pressure and is free from bitumen, solvents, heavy metals, chlorine, graphite and MoS2. Thanks to absence of solid lubricants, Klüberfluid DF 1 ULTRA is classified as a light-coloured product making it highly suitable for drives where a clean, transparent, operational lubricant is required.
Typical Characteristics
Product specifications | Method |
Klüber Klüberfluid D-F 1 Ultra |
|
Article number | 039084 | ||
NLGI grade | DIN 51818 | 00 | |
Upper service temperature | 80 °C / 176 °F | ||
Lower service temperature | 10 °C / 50 °F | ||
Colour space | green | ||
Texture | soft to fluid | ||
Density | 20°C | approx. 0.98 g/cm³ | |
Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx. |
24 months |
Application notes
Klüberfluid D-F 1 ULTRA is applied in small quantities either by manual application via the Klübermatic LB pump or alternatively by brush. To ensure optimum results are attained, repair lubrication should always be performed by experienced service engineers or technicians. Klüber specialists are internationally available to conduct this specialist service. Klüberfluid DF1 ULTRA must be stirred prior to application. NOTE: Klüberfluid D-F 1 ULTRA must not be applied via automatic spray equipment or centralised lubrication systems. To avoid misuse or error, Klüberfluid D-F 1 ULTRA should be stored in a safe place with its application restricted to specially authorised personnel!
Satisfied customers:
Quality brands only
genuine packages
Save costs
take control of your costs
save time and money
Global Deliveries
sea containers
air freight worldwide