Klüber Klüberlectric BQ 72-72
97% supplied in 5 working days
Shipping costs for all EU countries are calculated at checkout.
VAT number required
during checkout
Pay online or by invoice (within 30 days)
Klüber Klüberlectric BQ 72-72
Electroconductive low-noise rolling bearing grease for long-term lubrication
Application Klüber Klüberlectric BQ 72-72
Klüberlectric BQ 72-72 is primarily used for the long-term lubrication of capped or sealed ball bearings. Many of them are components of speed-controlled electric motors, generators or fans, or they operate in automobile applications where long service life has to be attained at above-average permanent temperatures and noise must be kept under control.
Performance, Features & Benefits of Klüber Klüberlectric BQ 72-72 are:
- Innovative lubricant containing ionic liquids to provide electroconductivity
- Excellent behaviour at high and low temperatures
- Especially for lifetime lubrication of capped or sealed deep groove ball bearings
- Very good low-noise characteristics
If you have any questions, please contact OilOnline Technical Helpdesk
Product Description Klüber Klüberlectric BQ 72-72
Do your rolling bearings have to meet challenging performance requirements in the face of long relubrication intervals or even lifetime lubrication? Do they have to operate over a wide service temperature range? Is there a risk of unwanted electric discharge which might lead to electric erosion and the formation of micro-craters? Do you operate rolling bearings in electric components such as generators or electric motors with continuously adjustable speed enabled by frequency converters and expect them to work reliably throughout the component's lifetime with only a minimum of noise? The right lubricant can make a substantial contribution to meeting these taxing requirements. Klüberlectric BQ 72-72 was developed as an electroconductive rolling bearing grease with added excellent low-noise characteristics. Due to the use of selected additives based on ionic liquids, the lubricant's electroconductivity was increased, attaining resistance characteristics resembling those of semiconductors. Another challenge exists in the form of high or low temperatures in combination with long-term or lifetime lubrication. When developing this product, we attached particular importance to the combination of electroconductivity, long-term performance and low-noise operation so as to provide you with a maximised range of applications.
Typical Characteristics
Product specifications : | Klüber Klüberlectric BQ 72-72 | |
Article number | 094140 | |
Chemical composition, thickener | polyurea | |
Chemical composition, type of oil | ester oil | |
Lower service temperature | -45 °C / -49 °F | |
Upper service temperature | 180 °C / 356 °F | |
Colour space | beige | |
Texture | homogeneous | |
Texture | short-fibred | |
Density at 20 °C | approx. 0.96 g/cm³ | |
Worked penetration, 25 °C, lower limit value | DIN ISO 2137 | 265 x 0.1 mm |
Worked penetration, 25 °C, upper limit value | DIN ISO 2137 | 295 x 0.1 mm |
Kinematic viscosity of the base oil, 40 °C | DIN 51562 pt. 01/ASTM D-445/ASTM D 7042 | approx. 72 mm²/s |
Kinematic viscosity of the base oil, 100 °C | DIN 51562 pt. 01/ASTM D-445/ASTM D 7042 | approx. 9.5 mm²/s |
Speed factor (n x dm) | 1 000 000 mm/min | |
Flow pressure of lubricating greases, test temperature:-45 °C | DIN 51805 | <= 1 400 mbar |
Noise test run, SKF BeQuiet+, noise classes | >= GN3 | |
Corrosion inhibiting properties of lubricating greases, (SKF-EMCOR), test duration: 1 week, distilled water |
DIN 51802 | <= 1 corrosion degree |
Testing of lubricating greases on FAG FE9 rolling bearing tester, speed: 6000 min-1, axial load: 1500 N, temperature: 180 °C, service life F50: |
DIN 51821 pt. 02 | >= 100 h |
Specific resistance based on electrode spacing:1 cm; grease quantity: 1 cm³ | DIN EN 62631-3-1 | <= 1*10⁷ Ohm cm |
Water resistance, 3 h/90 °C, rating | DIN 51807 pt. 01 | 0 - 90 |
Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx. |
36 months |
Application notes
Klüberlectric BQ 72-72 may be applied by brush, spatula, grease gun or grease cartridge. We recommend testing the pumpability of Klüberlectric BQ 72-72 in automatic lubrication systems prior to use.
Satisfied customers:
Quality brands only
genuine packages
Save costs
take control of your costs
save time and money
Global Deliveries
sea containers
air freight worldwide