Klüber Klüberpaste 46 MR 401
97% supplied in 5 working days
Shipping costs for all EU countries are calculated at checkout.
VAT number required
during checkout
Pay online or by invoice (within 30 days)
Klüber Klüberpaste 46 MR 401
Light-coloured high-pressure lubricating paste
Application Klüber Klüberpaste 46 MR 401
Klüberpaste 46 MR 401 is especially suitable as an assembly lubricant in frictional connections and for thin-film lubrication of all friction points subject to very high pressure loads, low sliding speed, high wear, Stick-Slip and tribo-corrosion. Typical applications include: press fit assembly of pins and bolts, mounting of rolling bearings, wheels and flanges, lubrication of rolling and plain bearings operating at very low speeds. Klüberpaste 46 MR 401 is also suitable to prevent running-in damage and stick-slip in components such as threaded spindles, spline shafts, ball and socket joints and rod end bearings. Its good compatibility with plastics facilitates the lubrication of radial shaft seals (o-rings, v-rings, sealing cups) made of rubber-elastic materials for extended lifetime. Owing to the many different elastomer and plastic compositions, we recommend compatibility be checked prior to series application.
Performance, Features & Benefits of Klüber Klüberpaste 46 MR 401 are:
- Easy assembly and disassembly of highly loaded frictional connections
- Prevents premature material ageing caused by tribo-corrosion and stick slip
- Can be used with many material combinations, including plastics and elastomers
If you have any questions, please contact OilOnline Technical Helpdesk
Product Description Klüber Klüberpaste 46 MR 401
Klüberpaste 46 MR 401 is a multipurpose lubricating paste with selected base oils, lithium soap and special solid lubricant additives. This versatile multipurpose paste has a wide service temperature range and shows good pressure absorption capacity as well as neutral behaviour towards non-ferrous metals, many plastics and elastomers.
Typical Characteristics
Product specifications : | Klüber Klüberpaste 46 MR 401 | |
Article number | 005108 | |
Lower service temperature | -40 °C / -40 °F | |
Upper service temperature | 150 °C / 302 °F | |
Colour space | white | |
Density at 20 °C | approx. 1.23 g/cm³ | |
Worked penetration, 25 °C, lower limit value | DIN ISO 2137 | 300 x 0.1 mm |
Worked penetration, 25 °C, upper limit value | DIN ISO 2137 | 340 x 0.1 mm |
Copper corrosion, (lubricating grease), 24h/100°C | DIN 51811 | 1 - 100 corrosion degree |
Corrosion inhibiting properties of lubricating greases, (SKF-EMCOR), test duration: 1 week, distilled water |
DIN 51802 | <= 1 corrosion degree |
Flow pressure of lubricating greases, test temperature: -40 °C | DIN 51805 | <= 1 600 mbar |
Drop point, | DIN ISO 2176, IP 396 | >= 185 °C |
Four-ball tester, welding load, | DIN 51350 pt. 04 | >= 4 600 N |
Friction coefficient screw test, measured with hexagon bolts M10x30-8.8, tightening speed n = 5 rpm, number of screws = 20, nut M10-8, plain and degreased, face material 42CrMo4 with roughness Ra 1.6, tightening torque MA = 50 Nm, averaged bearing surface friction coefficient (initial tightening) |
DIN EN ISO 4017 | 0.14 |
Friction coefficient screw test, measured with hexagon bolts M10x30-8.8, tightening speed n = 5 rpm, number of screws = 20, nut M10-8, plain and degreased, face material 42CrMo4 with roughness Ra 1.6, tightening torque MA = 50 Nm, standard deviation (S) of averaged bearing surface friction coefficient (initial tightening) |
DIN EN ISO 4017 | 0.004 |
Friction coefficients screw test, screw M 10x30-8.8, black and nut M 10-8, polished, averaged thread friction coefficient (first-time tightening) |
DIN EN ISO 4017 DIN EN ISO 4032 |
0.12 |
Friction coefficient screw test, Measured with hexagon bolts M10x30-8.8, tightening speed n = 5 rpm, number of screws = 20, nut M10-8, plain and degreased, face material 42CrMo4 with roughness Ra 1.6, tightening torque MA = 50 Nm, standard deviation (S) of averaged thread friction coefficient (initial tightening) |
DIN EN ISO 4017 | 0.01 |
Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx. |
36 months |
Application notes
Before applying Klüberpaste 46 MR 401 it is important to clean the contact surfaces and remove any solvent residues with a lint-free, dry cloth. Klüberpaste 46 MR 401 can be easily applied to the entire surface in a thin layer with a spatula. It is important to avoid overlubrication. Before applying the paste to a plastic material we recommend undertaking a materials compatibility test. The friction values indicated on page 2 in the Section Product Data were determined with two different materials. Other materials/surfaces have to be checked accordingly.
Satisfied customers:
Quality brands only
genuine packages
Save costs
take control of your costs
save time and money
Global Deliveries
sea containers
air freight worldwide