Klüber Klübersynth CH 2-680
97% supplied in 5 working days
Shipping costs for all EU countries are calculated at checkout.
VAT number required
during checkout
Pay online or by invoice (within 30 days)
Klüber Klübersynth CH 2-680
High-temperature chain oil for continuous wood panel presses
Application Klüber Klübersynth CH 2-680
Klübersynth CH 2-680 is used in continuous belt presses for the manufacture of fibreboards like particle, MDF, HDF, OSB and LVL products. The most complex lubrication points on the moving parts in the heating and compression area are: steel belts, chain carpets, heating plates; roller bar chains
Friction points, i.e. steel belt and roller bar carpets are fully exposed to the heating/compression temperature.
Performance, Features & Benefits of Klüber Klübersynth CH 2-680 are:
- Reduced energy consumption and improved efficiency due to advanced additives, especially at very high temperatures; highly viscous
- No lacquer-like residues formed under continuous total loss lubrication conditions
- Reduced oil consumption and fume formation due to low evaporation losses at high temperatures
- Good adhesion and spreading properties, minimised contamination risk and reliable lubricant supply to all friction points
If you have any questions, please contact OilOnline Technical Helpdesk
Product Description Klüber Klübersynth CH 2-680
Klübersynth CH 2-680 is a highly viscous, thermally stable ester oil for continuous wood presses of the latest generation operating under very high temperatures and high press speeds. Klübersynth CH 2-680 is an advanced product based on the oils of the HOTEMP series and shows a lower evaporation loss at temperatures > 200°C and a higher wear protection.
Typical Characteristics
Product specifications | Method |
Klüber Klübersynth CH 2-680 |
|
Article number | 002130 | ||
Chemical composition, type of oil | synthetic hydrocarbon oil | ||
Chemical composition, type of oil | ester oil | ||
Lower service temperature | 0 °C / 32 °F | ||
Upper service temperature | 250 °C / 482 °F | ||
Appearance | clear | ||
Colour space | yellow | ||
Density | 20 °C | DIN 51757 | approx. 0.93 g/ cm³ |
Kinematic viscosity | 40 °C | DIN 51562 pt. 01/ASTM D-445/ASTM D 7042 | approx. 680 mm²/s |
Kinematic viscosity | 100 °C | DIN 51562 pt. 01/ASTM D-445/ASTM D 7042 | approx. 60 mm²/ s |
Copper corrosion | 24 h/150°C | DIN EN ISO 2160 | <= 2 - 150 corrosion degree |
Flash point, Cleveland, open-cup apparatus | >= 270 °C | DIN EN ISO 2592 | |
Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx. |
24 months |
Application notes
According to the experience we gained on our test rigs and in practice, Klübersynth CH 2-680 does not form any lacquer-like residues when properly applied, i.e. if belts, roller bars, chains and slide rails are always covered with an oil film. However, extremely high temperatures in combination with insufficient lubrication may lead to the formation of powdery residues. When applying fresh oil in time, such residues will be regenerated and ensure proper lubricant supply to the friction points.
Satisfied customers:
Quality brands only
genuine packages
Save costs
take control of your costs
save time and money
Global Deliveries
sea containers
air freight worldwide
You may also be interested in
- Klüber Klübersynth CH 2-100 NStarting at: € 69,91 / L
- Klüber Klübersynth CH 2-220Starting at: € 47,23 / L
- Klüber Klübersynth CH 2-260Starting at: € 45,46 / L
- Klüber Klübersynth CH 2-280Starting at: € 82,43 / L