7 warehouses in Europe
Klüber Klübersynth GHE 6-460
97% supplied in 5 working days
Shipping costs for all EU countries are calculated at checkout.
VAT number required
during checkout
Pay online or by invoice (within 30 days)
Klüber Klübersynth GHE 6-460
Synthetic gear and circulating oils
Application Klüber Klübersynth GHE 6-460
Klübersynth GHE 6 oils were specially developed for the lubrication of spur, bevel, planetary and worm gears. Klübersynth GHE 6 oils are also used for the lubrication of rolling and plain bearings as well as all kinds of toothed couplings.
Performance, Features & Benefits of Klüber Klübersynth GHE 6-460 are:
- Klübersynth GHE 6 oils offer much longer service life than mineral oils due to the excellent ageing and oxidation resistance of the synthetic base oil; thus maintenance intervals can be extended and in certain cases even lifetime lubrication is possible.
- Its high scuffing load resistance offers good scuffing protection even at high peak loads.
- The good wear protection of both gears and rolling bearings prevents premature component failure, leading to lower maintenance and repair costs.
- The optimum friction behaviour of the polyglycol base oil reduces power losses and improves efficiency.
- The excellent viscosity-temperature behaviour supports the formation of a separating lubricating film even at elevated temperatures.
- Seals made of 72 NBR 902, 75 FKM 585 and 75 FKM 170055 are resistant to Klübersynth GHE 6 oils. Leakage and contamination are prevented.
- Approved by Flottweg Separation Technology.
If you have any questions, please contact OilOnline Technical Helpdesk
Product Description Klüber Klübersynth GHE 6-460
Klübersynth GHE 6 oils are polyglycol-based gear and circulating oils particularly resistant to ageing and oxidation offering high scuffing load capacity. Owing to their polyglycol base oil, Klübersynth GHE 6 oils have a good viscosity-temperature and excellent high-temperature behaviour.
Typical Characteristics
| Product specifications | Method |
Klüber Klübersynth GHE 6-460 |
|
| Article number | 012313 | ||
| Lower service temperature | -30 °C / -22 °F | ||
| Upper service temperature | 160 °C / 320 °F | ||
| Density | 15 °C | DIN 51757 | approx. 1 077 kg/m³ |
| Kinematic viscosity | 20 °C | DIN 51562 pt. 01/ASTM D-445/ASTM D 7042 | approx. 1 270 mm²/s |
| Kinematic viscosity | 40 °C | DIN 51562 pt. 01/ASTM D-445/ASTM D 7042 | approx. 460 mm²/s |
| Kinematic viscosity | 100 °C | DIN 51562 pt. 01/ASTM D-445/ASTM D 7042 | approx. 73 mm²/s |
| ISO viscosity grade | DIN ISO 3448 | 460 | |
| Viscosity index | DIN ISO 2909 | >= 230 | |
| FZG scuffing test, scuffing load stage | DIN ISO 14635-1, A/8.3/90 | >= 14 | |
| FAG FE8 rolling bearing test, wear of rolling element |
DIN 51819-3, D 7,5/80-80 | <= 30 mg | |
| FAG FE8 rolling bearing test, wear of cage | DIN 51819-3, D 7,5/80-80 | <= 200 mg | |
| Anticorrosive properties on steel | 24 h/60 °C | DIN ISO 7120, method A, steel | no rust corrosion degree |
| Copper corrosion | 24 h/100°C | DIN EN ISO 2160 | 1 - 100 corrosion degree |
| Pour point | <= -35 °C | DIN ISO 3016 | |
| Foam test | sequence I/24 °C | ASTM-D 892, ISO 6247 | <= 100/10 ml |
| Foam test | sequence II/ 93.5 °C | ASTM-D 892, ISO 6247 | <= 100/10 ml |
| Foam test | sequence III/24°C | ASTM D 892, ISO 6247 | <= 100/10 ml |
| Flash point, Cleveland, open-cup apparatus | >= 280 °C | DIN EN ISO 2592 | |
| Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx. |
36 months |
Application notes
Klübersynth GHE 6 oils can be applied by immersion, immersion/circulation and injection. Klübersynth GHE 6 oils are not miscible with mineral oils and synthetic hydrocarbons. Prior to switchover, lubrication points should be cleaned, or gears or enclosed systems be flushed with Klübersynth GHE 6. Klübersynth GHE 6 oils are neutral towards virtually all nonferrous metals. There may be increased wear when the contact surfaces of design elements made of aluminium or aluminium alloys are exposed to dynamic loads. If necessary, preliminary tests should be carried out. For use at permanent temperatures of 80 °C max., seals made of 72 NBR 902 may be used. For higher temperatures, seals made of 75 FKM 585 or 75 FKM 170055 should be chosen. It should be noted that elastomers from one or several manufacturers can behave differently; therefore tests should be performed. When applying Klübersynth GHE 6 oils we recommend the use of two-component paints (reaction paints) for interior coating. Oil gauge glasses should preferably be made of natural glass or polyamide materials. Other transparent plastics, e.g. Plexiglas, have a tendency to crack under stress. The suitability of materials used in contact with Klübersynth GHE 6 oils should be tested, especially prior to series application.
Satisfied customers:
Quality brands only
genuine packages
Save costs
take control of your costs
save time and money
Global Deliveries
sea containers
air freight worldwide
You may also be interested in
-
![Klüber Klübersynth GHE 6-100]()
Klüber Klübersynth GHE 6-100Starting at: € 20,80 / L
