7 warehouses in Europe
Klüber Klübersynth PEG 46-121
97% supplied in 5 working days
Shipping costs for all EU countries are calculated at checkout.
VAT number required
during checkout
Pay online or by invoice (within 30 days)
Klüber Klübersynth PEG 46-121
Special greases for the lubrication of enclosed gear drives
Application Klüber Klübersynth PEG 46-121
Klübersynth PEG 46 greases were developed especially for the lubrication of spur gears, bevel gears, planetary gears and worm gears with material pairings steel/steel or steel/brass in small enclosed gear drives. Klübersynth PEG 46 greases can also be used for the lubrication of ball and roller guides, rolling and plain bearings as well as toothed couplings.
Performance, Features & Benefits of Klüber Klübersynth PEG 46-121 are:
- The good wear protection of both the gears and the rolling bearings ensures a long service life of the components
- The excellent viscosity-temperature behaviour supports the formation of a sufficient lubricating film even at elevated and high temperatures
- Much longer service life than mineral oils due the excellent ageing und oxidation stability of the synthetic base oil used in Klübersynth PEG 46 greases: Thus maintenance intervals can be extended and in certain cases even lifetime lubrication is possible
- The excellent friction behaviour of the polyglycol base oil reduces power losses and improves efficiency
If you have any questions, please contact OilOnline Technical Helpdesk
Product Description Klüber Klübersynth PEG 46-121
Klübersynth PEG 46 special greases are formulated from a polyglycol base oil and a lithium thickener, available in NLGI grades 00 and 1.
Typical Characteristics
| Product specifications : | Klüber Klübersynth PEG 46-121 | |
| Article number | 027041 | |
| NLGI grade, | DIN 51818 | 1 |
| Lower service temperature | -50 °C / -58 °F | |
| Upper service temperature | 120 °C / 248 °F | |
| Colour space | brown | |
| Texture | homogeneous | |
| Density at 20 °C | approx. 0.98 g/cm³ | |
| Worked penetration, 25 °C, upper limit value | DIN ISO 2137 | 340 x 0.1 mm |
| Worked penetration, 25 °C, lower limit value | DIN ISO 2137 | 310 x 0.1 mm |
| Kinematic viscosity of the base oil, 40 °C | DIN 51562 pt. 01/ASTM D-445/ASTM D 7042 |
approx. 120 mm²/s |
| Kinematic viscosity of the base oil, 100 °C | DIN 51562 pt. 01/ASTM D-445/ASTM D 7042 |
approx. 20 mm²/s |
| Copper corrosion, (lubricating grease), 24h/100°C | DIN 51811 | 1 - 100 corrosion degree |
| Drop point, | DIN ISO 2176, IP 396 | >= 180 °C |
| FZG scuffing test, based on DIN ISO 14635, A/2,76/50, scuffing load stage | > 12 | |
| Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx. |
24 months |
Application notes
Immersion lubrication of gears operating at circumferential speeds up to approx. 10 m/s is possible if NLGI grade 00 is used. Sufficient heat dissipation is essential. Depending on the operating conditions higher circumferential speeds are possible. The dynamic stresses of design elements made of aluminium or aluminium alloys may lead to increased wear. If necessary, wear tests should be carried out.
Satisfied customers:
Quality brands only
genuine packages
Save costs
take control of your costs
save time and money
Global Deliveries
sea containers
air freight worldwide
