7 warehouses in Europe
Klüber Klübertec ST 4-701
97% supplied in 5 working days
Shipping costs for all EU countries are calculated at checkout.
VAT number required
during checkout
Pay online or by invoice (within 30 days)
Klüber Klübertec ST 4-701
Stamping and forming fluid
Application Klüber Klübertec ST 4-701
- Blanking & drawing of steel and non-ferrous sheet metal between 0.2 and 2.5 mm thick
- Rolling, deep drawing, edging and folding, e.g. in the manufacture of drum lids
- Preserving steel components, e.g. brake parts
- Corrosion protection of assembly components
Performance, Features & Benefits of Klüber Klübertec ST 4-701 are:
- Excellent stamping and cutting properties
- Compatibility with paints without pre-degreasing of metal components after processing
- Micro-dosage
- Low consumption
If you have any questions, please contact OilOnline Technical Helpdesk
Product Description Klüber Klübertec ST 4-701
Klübertec ST 4-701 is a thin-bodied mixture of ester oil and aliphatic hydrocarbons. Its synthetic structure provides improved lubricity during the stamping of metal sheets plus a wear reducing effect on machine tooling. The solvent contained (90 %) evaporates upon application so that subsequent processes (welding, glueing, painting) are not affected in most cases.
Typical Characteristics
| Product specifications | Method |
Klüber Klübertec ST 4-701 |
|
| Article number | 046067 | ||
| Appearance | clear to slightly turbid | ||
| Colour space | yellow | ||
| Density | 20 °C | DIN 51757 | approx. 0.79 g/cm³ |
| Flash point, Pensky-Martens, closed cup | 60 - 72 °C | DIN EN ISO 2719 | |
| Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx. |
24 months |
Application notes
The product can be applied by spraying; rolling (felt rollers); spot application; immersion over the entire width of the sheet or on predetermined parts. The lubricating film thickness can be increased by adding Klüberfluid 9 R 100, thus increasing the forming capacity, e.g. forming of sheets to a thickness up to 3 mm and draw depth of 100 mm (steel sheets to a thickness of approximately 1.5 mm). Evaporation upon process completion can be accelerated by moving air (fan, etc.) or heat (not above 60 °C).
Satisfied customers:
Quality brands only
genuine packages
Save costs
take control of your costs
save time and money
Global Deliveries
sea containers
air freight worldwide
You may also be interested in
-
![Klüber Klübertec ST 4-702]()
Klüber Klübertec ST 4-702Starting at: € 11,80 / L
