7 warehouses in Europe
Klüber Klübertherm HB 88-182
97% supplied in 5 working days
Shipping costs for all EU countries are calculated at checkout.
VAT number required
during checkout
Pay online or by invoice (within 30 days)
Klüber Klübertherm HB 88-182
Rolling bearing grease for high loads and temperatures
Application Klüber Klübertherm HB 88-182
Applications include the long-term lubrication of rolling bearings subject to high temperatures and loads. Klübertherm HB 88-182 offers you even more and by buying a single grease, you will obtain a variety of strong benefits for applications under highly varied conditions and bearing designs. These include: Rolling bearing applications in corrugating machines, rotary unions, generator bearings, conveyors, hydraulic couplings, smoke extractor motors, and ceramic ovens; Lifetime lubrication of cylindrical roller bearings with a high percentage of sliding friction; Sealing systems in the automotive industry
Performance, Features & Benefits of Klüber Klübertherm HB 88-182 are:
- Lubricating grease suited to the requirements of high-temperature applications of up to 180 °C without residue formation in bearings or pipes
- Closes the gap between high-temperature greases based on PFPE oils and standard ester oil-based greases
- Low-density product for high volume yield, leading to lower consumption costs compared to fully fluorinated lubricants
- Sustainable: Better degradability in the environment than PFPE-based products
If you have any questions, please contact OilOnline Technical Helpdesk
Product Description Klüber Klübertherm HB 88-182
As a manufacturer or operator of production equipment, you would like to lubricate the various rolling bearings in your equipment with one single grease for all service temperatures, which not only facilitates your work processes for initial and relubrication, but also prevents product mix-up. Klübertherm HB 88-182 is a versatile long-term grease offering good corrosion and wear protection for rolling bearings subject to high loads and medium speeds at temperatures of up to 180 °C. While many lubricants disintegrate when subject to high temperature and humidity, Klübertherm HB 88-182 is resistant to hydrolysis. These positive characteristics enable you to optimise lubrication intervals and to protect your components against premature failure. The density of Klübertherm HB 88-182 is only about half as that of PFPE-based lubricants normally used in this temperature range, enabling cost savings. Its lower shear viscosity offers potential for energy savings.
Typical Characteristics
| Product specifications : | Klüber Klübertherm HB 88-182 | |
| Article number | 093006 | |
| NLGI grade, | DIN 51818 | 2 |
| Chemical composition, type of oil | synthetic hydrocarbon oil | |
| Chemical composition, thickener | PTFE | |
| Lower service temperature | -30 °C / -22 °F | |
| Upper service temperature | 180 °C / 356 °F | |
| Colour space | beige | |
| Density at 20 °C | approx. 1.12 g/cm³ | |
| Worked penetration, 25 °C, lower limit value | DIN ISO 2137 | 265 x 0.1 mm |
| Worked penetration, 25 °C, upper limit value | DIN ISO 2137 | 295 x 0.1 mm |
| Kinematic viscosity of the base oil, 40 °C | DIN 51562 pt. 01/ASTM D-445/ASTM D 7042 | approx. 180 mm²/s |
| Kinematic viscosity of the base oil, 100 °C | DIN 51562 pt. 01/ASTM D-445/ASTM D 7042 | approx. 19.5 mm²/s |
| Shear viscosity at 25 °C, shear rate 300 s-1, equipment: rotational viscometer, lower limit value | 4 000 mPas | |
| Shear viscosity at 25°C, shear rate 300 s-1, equipment:rotational viscometer, upper limit value | 8 000 mPas | |
| Copper corrosion, (lubricating grease), 24h/150 °C | DIN 51811 | 1 - 150 corrosion degree |
| Corrosion inhibiting properties of lubricating greases, (SKF-EMCOR), test duration: 1 week, distilled water |
DIN 51802 | <= 1 corrosion degree |
| Flow pressure of lubricating greases, test temperature: -20 °C | DIN 51805 | <= 1 400 mbar |
| Speed factor (n x dm) | approx. 300 000 mm/min | |
| Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx. |
36 months |
Application notes
Notes for your application: Klübertherm HB 88-182 is applicable by grease guns, also at high temperatures, without clogging lines or forming solid residues which damage your bearings. It is advisable to clean new bearings to remove anticorrosive agents prior to initial lubrication to facilitate good lubricant adhesion. No cleaning is required in case of thin film anticorrosive coatings. We will be pleased to provide guidance on the optimisation of lubricant life.
Satisfied customers:
Quality brands only
genuine packages
Save costs
take control of your costs
save time and money
Global Deliveries
sea containers
air freight worldwide
