Klüber POLYLUB GLY 801
97% supplied in 5 working days
Shipping costs for all EU countries are calculated at checkout.
VAT number required
during checkout
Pay online or by invoice (within 30 days)
Klüber POLYLUB GLY 801
Special synthetic lubricating greases for a wide application range
Application Klüber POLYLUB GLY 801
Vehicles Gearshift linkages, moving parts of the heating and ventilation system, shock absorber seals, tie rod elements, seat mechanisms, sun roof guides, pedals. Plain bearings Many types of plain bearing designs. POLYLUB GLY 151, 501, 801 prevent stick-slip to a large extent, particularly in applications where normally a hydrodynamic lubricating film cannot form. Gears Small electric gears with plastic-metal friction components, manual gears operating at very low sliding speeds. Pneumatic installations Pneumatic valves and cylinders with and without piston rod (for these applications, the upper service temperature should not exceed 130 °C). Seals Lubricating and sealing grease for various types of seals. The POLYLUB GLY 151, 501 and 801 lubricants are also suitable for many other plastic components subject to wear caused by relative movement against metal or plastic surfaces. Owing to good damping properties, especially of POLYLUB GLY 801 and 501, noise is considerably reduced.
Performance, Features & Benefits of Klüber POLYLUB GLY 801 are:
- For many applications in connection with various plastics and elastomers
- Approved by many renowned manufacturers and suppliers in the automotive industry, e.g. DBL 6827.60, VW TL 52147, Brose Fettgruppe 11 and many more
- The integrated UV indicator allows a reliable lubricant detection (wave length 366 nm) even with minimum quantity lubrication
- Contributes to mechanical damping and noise reduction of switches and contacts.
If you have any questions, please contact OilOnline Technical Helpdesk
Product Description Klüber POLYLUB GLY 801
The product series POLYLUB GLY 151, 501, 801 is based on a synthetic hydrocarbon oil, mineral oil and special lithium soap. It comprises three lubricating greases reducing friction and wear in plain bearings, slideways and small gears made of plastic. The lubrication of plastics is special in a number of ways. As the behaviour of metals and plastics differs in many aspects, the lubricants' properties have to be adjusted to the plastic. Compared to many metals, plastics are relatively soft. Solid lubricants, which may achieve a positive effect on many metal friction points, can have a negative or no effect at all on plastic lube points. With the formulation of POLYLUB GLY 151, 501, 801, Klüber Lubrication offers products which are free of solid lubricants, and offer good adhesion.
Typical Characteristics
Product specifications | Method |
Klüber POLYLUB GLY 801 |
|
Article number | 020199 | ||
NLGI grade | DIN 51818 | 1 | |
Chemical composition, type of oil | mineral oil | ||
Chemical composition, type of oil | synthetic hydrocarbon oil |
||
Chemical composition, thickener | special lithium soap | ||
Chemical composition | UV additive | ||
Lower service temperature | -40 °C / -40 °F | ||
Upper service temperature | 130 °C / 266 °F | ||
Colour space | beige | ||
Density | 20°C | approx. 0.88 g/cm³ | |
Worked penetration, lower limit value | 25°C | DIN ISO 2137 | 310 x 0.1 mm |
Worked penetration, upper limit value | 25°C | DIN ISO 2137 | 340 x 0.1 mm |
Kinematic viscosity of the base oil | 40°C | DIN 51562 pt. 01/ASTM D-445/ASTM D 7042 |
approx. 730 mm²/s |
Kinematic viscosity of the base oil | 100°C | DIN 51562 pt. 01/ASTM D-445/ASTM D 7042 |
approx. 60 mm²/s |
Shear viscosity at 25 °C, shear rate 300 s-1, equipment: rotational viscometer, lower limit value |
4 000 mPas | ||
Shear viscosity at 25°C, shear rate 300 s-1, equipment:rotational viscometer, upper limit value |
8 000 mPas | ||
Corrosion inhibiting properties of lubricating greases, (SKF-EMCOR), test duration: 1 week, distilled water | DIN 51802 |
<= 1 corrosion degree |
|
Oil separation, after 30 h/100 °C |
ASTM D 6184 [FTMS 791 C 321] | <= 4 % by weight | |
Drop point | DIN ISO 2176, IP 396 | >= 250 °C | |
Oxidation stability of lubricating greases, 100 h/99 °C, pressure drop |
ASTM D942 | <= 0.3 bar | |
Water resistance, 3 h/90 °C, rating | DIN 51807 pt. 01 | <= 1 - 90 | |
Minimum shelf life from the date of manufacture - in a dry, frostfree place and in the unopened original container, approx. | 36 months |
Application notes
POLYLUB GLY 151, 501 and 801 are applied by brush, spatula or automatic metering systems.
Satisfied customers:
Quality brands only
genuine packages
Save costs
take control of your costs
save time and money
Global Deliveries
sea containers
air freight worldwide
You may also be interested in
- Klüber POLYLUB GLY 501Starting at: € 130,33 / Kg
- Klüber POLYLUB GLY 151Starting at: € 134,22 / Kg
- Klüber POLYLUB GLY 791Starting at: € 139,08 / Kg