7 warehouses in Europe
Klüber STABURAGS NBU 12 ALTEMP
97% supplied in 5 working days
Shipping costs for all EU countries are calculated at checkout.
VAT number required
during checkout
Pay online or by invoice (within 30 days)
Klüber TABURAGS NBU 12 Altemp
Lubricating grease for plain and rolling bearings
Application Klüber TABURAGS NBU 12 Altemp
STABURAGS NBU 12 ALTEMP is used as a grease for rolling and plain bearings and for assembly purposes. It is suitable for slideways, threaded spindles, bearing seats and clamping chucks.
Performance, Features & Benefits of Klüber TABURAGS NBU 12 Altemp are:
- For plain and rolling bearings
- Good corrosion protection
- Resistant to hot water
- Suitable for assembly purposes
- Effective on lubrication points subject to external vibrations
- Protects against tribo-corrosion
If you have any questions, please contact OilOnline Technical Helpdesk
Product Description Klüber TABURAGS NBU 12 Altemp
STABURAGS NBU 12 ALTEMP is a mineral oil based lubricating grease for plain and rolling bearings operating at low to medium speeds. It has proven effective in lubricating points subject to external vibrations or oscillations. Containing solid lubricants, STABURAGS NBU 12 ALTEMP protects against fretting corrosion and is resistant to hot water.
Typical Characteristics
| Product specifications | Method |
Klüber TABURAGS NBU 12 Altemp |
|
| Article number | 005018 | ||
| Chemical composition | solid lubricant | ||
| Chemical composition, thickener | barium complex soap | ||
| Chemical composition, type of oil | mineral oil | ||
| Lower service temperature | -15 °C | 5 °F | |
| Upper service temperature | 120 °C | 248 °F | |
| Colour space | beige | ||
| Density at | 20 °C | approx. 1.08 g/cm³ | |
| Worked penetration | 25 °C | DIN ISO 2137, upper limit value | 245 x 0.1 mm |
| Worked penetration | 25 °C | DIN ISO 2137, upper limit value | 275 x 0.1 mm |
| Kinematic viscosity of the base oil | 100 °C | DIN 51562 pt. 01/ASTM D-445/ASTM D 7042 | approx. 19 mm²/s |
| Kinematic viscosity of the base oil | 40 °C | DIN 51562 pt. 01/ASTM D-445/ASTM D 7042 | approx. 222.5 mm²/s |
| Shear viscosity at | 25 °C | shear rate 300 s-1; equipment:rotational viscometer | approx. 10 000 mPas |
Application notes
The product is applied by brush, spatula or conventional metering systems. When used as an assembly grease, it is applied to the entire component surface by hand, using a piece of cloth or a brush.
Satisfied customers:
Quality brands only
genuine packages
Save costs
take control of your costs
save time and money
Global Deliveries
sea containers
air freight worldwide
