Klüber Summit DSL 32
97% supplied in 5 working days
Shipping costs for all EU countries are calculated at checkout.
VAT number required
during checkout
Pay online or by invoice (within 30 days)
Klüber Summit DSL 32
Fully synthetic air compressor oils for oil change intervals up to 8,000 operating hours
Application Klüber Summit DSL 32
The Klüber Summit DSL 32 … 68 oils have been especially designed for oil change intervals up to 8,000 operating hours* in oil-injected screw-type compressors. Klüber Summit DSL 32 and 46 can also be used for the lubrication of centrifugal compressors, whereas Klüber Summit DSL 68 ... 125 is particularly suitable for the lubrication reciprocating piston compressors. Klüber Summit DSL oils are used for compressors that were previously run with conventional mineral oils. These oils are neutral towards most elastomer seals used in air compressors, therefore leakage is not to be expected. Klüber Summit DSL oils are mainly used in reciprocating piston compressors which do not achieve the desired maintenance intervals when using mineral oils or which show severe residue formation (carbon buildups) on valves and in the compression chamber. Klüber Summit DSL 32, 46, and 68 are biodegradable and can therefore be used in eco-sensitive applications. Klüber Summit DSL oils offer good oxidation stability due to the synthetic base oil, thus minimizing oxidation residues in the compressors and extending oil change intervals and the service life of oil filters and separators (screw-type compressors) and valves (reciprocating piston compressors).
Performance, Features & Benefits of Klüber Summit DSL 32 are:
- Low maintenance and operating costs due to oil change intervals up to 8,000 operating hours in oil-injected screw-type compressors
- Easier compressor oil conversion due to neutral behaviour of oils towards seals
- Good soil dissolving capacity, clean oil circuit due to the ester content in the oil, reduction of cleaning costs
- Low formation of oxidation residues in the oil circuit, reduced operating costs due to extended oil filter and separator life
- Klüber Summit DSL 32, 46, and 68 are biodegradable oils and can be used for sensitive applications like sewage plants
If you have any questions, please contact OilOnline Technical Helpdesk
Product Description Klüber Summit DSL 32
Klüber Summit DSL oils are air compressor oils based on a synthetic ester oil and additives. They can be mixed with mineral oils, synthetic hydrocarbon oils and polyglycol oils
Typical Characteristics
Product specifications | Method |
Klüber Summit DSL 32 |
|
Article number | 050000 | ||
Colour space | yellow | ||
Density | 20°C | DIN 51757 | approx. 0.94 g/cm³ |
Foam test, sequence I/24 °C |
ASTM-D 892, ISO 6247 | <= 50/0 ml | |
Foam test, sequence II/ 93.5 °C |
ASTM-D 892, ISO 6247 | <= 50/0 ml | |
Foam test, sequence III/24°C |
ASTM D 892, ISO 6247 | <= 50/0 ml | |
Demulsifying capacity | 54°C | DIN 51599, ASTM D 1401 |
40/37/3 ml |
Biodegradability according to OECD 301 F, (within 28 days) |
>= 60 % | ||
Flash point, Cleveland, open-cup apparatus |
DIN EN ISO 2592 | >= 220 °C | |
Kinematic viscosity | 40°C | DIN 51562 pt. 01/ASTM D-445/ASTM D 7042 |
approx. 32 mm²/s |
Kinematic viscosity | 100°C | DIN 51562 pt. 01/ASTM D-445/ASTM D 7042 |
approx. 5.8 mm²/s |
Viscosity index | DIN ISO 2909 | >= 70 | |
Copper corrosion, 24 h/100°C |
DIN EN ISO 2160 | 1 - 100 corrosion degree |
|
Pour point | DIN ISO 3016 | <= -42 °C | |
Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx. |
60 months |
Application notes
When selecting the oil viscosity for air compressors please observe the manufacturers' instructions. When switching a used compressor to a Klüber Summit DSL oil, drain old oil from whole circuit of compressor while still warm. We also recommend changing all oil filters and separators. Then refill the compressor with Klüber Summit DSL oil. When switching from mineral oil to a synthetic Klüber Summit DSL oil please consider that the compressor may contain oxidation residues in the form of blackened or contaminated oil. As such residues can affect the service life of the fresh Klüber Summit DSL oil, the compressor should be cleaned using the Klüber Summit Varnasolv conditioner (cf. product information leaflet). Your contact persons at Klüber Lubrication would be pleased to provide further information. After switching to a Klüber Summit DSL oil we recommend determining the oil change interval through an oil analysis or the Klüber Summit TAN Kit.
Satisfied customers:
Quality brands only
genuine packages
Save costs
take control of your costs
save time and money
Global Deliveries
sea containers
air freight worldwide
You may also be interested in
- Klüber Summit DSL 46Starting at: € 17,75 / L
- Klüber Summit DSL 100Starting at: € 28,22 / L
- Klüber Summit DSL 125Starting at: € 29,35 / L
- Klüber ISOFLEX LDS 18 SPECIAL AStarting at: € 26,37 / L