7 warehouses in Europe
Klüber Summit FG 100
97% supplied in 5 working days
Shipping costs for all EU countries are calculated at checkout.
VAT number required
during checkout
Pay online or by invoice (within 30 days)
Klüber Summit FG 100
Fully synthetic compressor oils for the food-processing and pharmaceutical industries
Application Klüber Summit FG 100
Klüber Summit FG oils can be used as vacuum pump oils, evacuating air or inert gases if a food grade oil is required. Klüber Summit FG oils can be used for oil-injected screw-type compressors, reciprocating piston compressors and rotary vane compressors. Klüber Summit FG oils are intended for use in compressors of the food-processing and pharmaceutical industries requiring oilfree compressed air (without oil vapour, which cannot be removed by the oil separator). These oils are also suitable for gear lubrication in oil-free screwtype compressors.
Performance, Features & Benefits of Klüber Summit FG 100 are:
- Klüber Summit FG oils are NSF H1 registered for use in the food-processing and pharmaceutical industries and comply with FDA 21 CFR Sec 178.3570
- ISO 21469 certified – supports compliance with the hygienic requirements of your production.
- Low maintenance and operating costs due to extended oil change intervals up to 5,000 operating hours1 in oilinjected screw-type compressors
- Easy compressor conversion from mineral to the synthetic Klüber Summit FG oils due to miscibility and compatibility with common seal materials
- Low tendency to evaporation and thus low impact of the oil vapour on the compressed air
- Longer service of oils filters, activated carbon filters and oil separators
- Excellent demulsifying behaviour and hence good water separation ability
If you have any questions, please contact OilOnline Technical Helpdesk
Product Description Klüber Summit FG 100
Klüber Summit FG oils are special compressor oils developed for the food-processing and pharmaceutical industries. They are fully synthetic and can be mixed with mineral oil as well as other synthetic hydrocarbon oils. Klüber Summit FG oils offer very good oxidation stability due to the synthetic base oil, thus minimizing oxidation residues in the compressors and extending oil change intervals and the service life of oil filters and separators. Klüber Summit FG oils are NSF H1 registered and therefore comply with FDA 21 CFR § 178.3570. The lubricants were developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical or animal feed industries. The use of Klüber Summit FG oils can contribute to increase reliability of your production processes. We nevertheless recommend conducting an additional risk analysis, e.g. HACCP.
Typical Characteristics
| Product specifications | Method |
Klüber Summit FG 100 |
|
| Article number | 050008 | ||
| NSF-H1 registration | 143 606 | ||
| Density | 20°C | DIN 51757 | approx. 0.83 g/cm³ |
| Kinematic viscosity | 40 °C | DIN 51562 pt. 01/ASTM D-445/ASTM D 7042 |
approx. 32 mm²/s |
| Kinematic viscosity | 100°C | DIN 51562 pt. 01/ASTM D-445/ASTM D 7042 |
approx. 5.8 mm²/s |
| Viscosity index | DIN ISO 2909 | >= 120 | |
| Demulsifying capacity | 54°C | DIN 51599, ASTM D 1401 |
40/37/3 ml |
| Demulsifying capacity | 82 °C | DIN ISO 6614, ASTM D 1401 |
|
| Pour point | DIN ISO 3016 | <= -50 °C | |
| Flash point, Cleveland, open-cup apparatus |
DIN EN ISO 2592 | >= 230 °C | |
| Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx |
60 months |
Application notes
When selecting the oil viscosity for air compressors, please observe the manufacturers' instructions. For oil-injected screw-type compressors normally the viscosity grades ISO VG 32, 46 and 68 are used, for reciprocating piston and rotary vane compressors ISO VG 68, 100 and 150 and for centrifugal compressors ISO VG 32. Notes on switching from mineral to synthetic oils: When switching a used compressor to a Klüber Summit FG oil, drain old oil from whole circuit of compressor while still warm. We also recommend changing all oil filters and separators. Then refill the compressor with Klüber Summit FG oil. When switching from mineral oil to a synthetic Klüber Summit FG oil please bear in mind that the compressor may contain oxidation residues in the form of blackened or contaminated oil. As such residues can affect the service life of the fresh Klüber Summit FG oil, the compressor should be cleaned using the Klüber Summit Varnasolv conditioner. After switching to a Klüber Summit FG oil we recommend determining the oil change interval through an oil analysis or the Klüber Summit TAN Kit after approx. 500 to 1000 operating hours. For further information please turn to your contact person at Klüber Lubrication or see the product information leaflet on Klüber Summit Varnasolv.
Satisfied customers:
Quality brands only
genuine packages
Save costs
take control of your costs
save time and money
Global Deliveries
sea containers
air freight worldwide
You may also be interested in
-
![Klüber Summit FG 250]()
Klüber Summit FG 250Starting at: € 25,52 / L -
![Klüber Summit FG 300]()
Klüber Summit FG 300Starting at: € 26,37 / L -
![Klüber Summit FG 500]()
Klüber Summit FG 500Starting at: € 28,38 / L
