7 warehouses in Europe
Klüber Summit R 300
97% supplied in 5 working days
Shipping costs for all EU countries are calculated at checkout.
VAT number required
during checkout
Pay online or by invoice (within 30 days)
Klüber Summit R 300
Synthetic compressor oils, particularly for highly loaded ammonia and CO2 refrigeration plants
Application Klüber Summit R 300
Klüber Summit R series lubricants have been designed especially for highly loaded screw-type and reciprocating piston compressors which are operated with ammonia (R717) or CO2 (R744). These lubricants can also be used with natural hydrocarbon refrigerants like propane (R290), propylene (R1270) or butane (R600). Especially with these refrigerants, the solubility of the gas in the oil under operating conditions and the resulting drop in viscosity has to be taken into account. Klüber Lubrication would be pleased to assist you in selecting the most appropriate oil. Due to the synthetic base oil contained in the Klüber Summit R series lubricants, oil carryover into the refrigeration cycle is much lower than with conventional mineral oils, which helps to reduce oil consumption. The viscosity of the oils remains constant for a long time, due to the fact that only a few highly volatile fractions are contained in the oil. Oil changes due to the increase in viscosity can be extended considerably. The base oil offers high chemical stability, particularly to ammonia, the typical blackening of conventional mineral oils or deposits in the refrigeration cycle are prevented. Our experience gained in practice has shown that Klüber Summit 200 can be used for evaporating temperatures as low as ≥-50°C depending on the operating conditions.
Performance, Features & Benefits of Klüber Summit R 300 are:
- Klüber Summit R oils are NSF H1 registered for use in the food-processing and pharmaceutical industry and comply with FDA 21 CFR Sec 178.3570
- Low maintenance costs due to extended oil change intervals and reduced oil consumption
- Easy compressor oil conversion due to neutral behaviour towards seals
- High efficiency of the refrigeration plant due to reduced oil deposits
- Low operating costs due to long service life of filters and oil separators
- Wide range of application with evaporating temperatures, in some cases down to ≥-50°C
- Meets NSF H1 requirements for use in the food-processing industry (except for Klüber Summit R 500 and R 600)
If you have any questions, please contact OilOnline Technical Helpdesk
Product Description Klüber Summit R 300
Klüber Summit R series lubricants are based on polyalphaolefins. No paraffin is contained in the formulation of this lubricant. However, we cannot rule out the possibility that the lubricant contains traces of paraffin. Depending on the application, we recommend consulting with us. They offer good cold flow properties. They contain base oils of high chemical stability and show a low tendency to evaporation. Klüber Summit R series lubricants are miscible with mineral oils. Klüber Summit R 100, 200 and 300 comply with the requirements set forth in DIN 51 503-1, KAA (08.97). Klüber Summit R oils are NSF H1 registered and therefore comply with FDA 21 CFR § 178.3570. The lubricants were developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical or animal feed industries. The use of Klüber Summit R oils can contribute to increase reliability of your production processes. We nevertheless recommend conducting an additional risk analysis, e.g. HACCP. These lubricants can be used for refrigeration compressors in the food-processing industry
Typical Characteristics
| Product specifications | Method |
Klüber Summit R 300 |
|
| Article number | 050042 | ||
| NSF-H1 registration | 134 123 | ||
| Appearance | clear | ||
| Colour space | colourless | ||
| Density | 20 °C | DIN 51757 | approx. 0.84 g/ cm³ |
| Kinematic viscosity | 40°C | DIN 51562 pt. 01/ASTM D-445/ ASTM D 7042 |
approx. 100 mm²/ s |
| Kinematic viscosity | 100°C | DIN 51562 pt. 01/ASTM D-445/ ASTM D 7042 |
approx. 14.5 mm²/ s |
| Viscosity index | DIN ISO 2909 | >= 138 | |
| Pour point | DIN ISO 3016 | <= -39 °C | |
| Flash point, Cleveland, open-cup apparatus |
DIN EN ISO 2592 | >= 240 °C | |
| Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx. |
36 months |
Application notes
Drain old oil from whole circuit of the refrigeration compressor while still warm. We recommend changing all oil filters and separators and draining the oil catches of the refrigeration cycle completely. Then recharge compressor with the operational Klüber Summit R series lubricant.
Satisfied customers:
Quality brands only
genuine packages
Save costs
take control of your costs
save time and money
Global Deliveries
sea containers
air freight worldwide
