Klüber Summit SH 46 XS

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Your benefit: pallet advantage from 2 barrels

97% supplied in 5 working days

Shipping Rate

No VAT within the EU

Pay online or by invoice (within 30 days)

Overview

Klüber Summit SH 46 XS

Synthetic air compressor oil enabling oil change intervals up to 10,000 operating hours

Application Klüber Summit SH 46 XS

Klüber Summit SH 46 SX was especially developed for the lubrication of highly loaded rotary screw compressors which require an oil formulated without the use of silicone raw materials. Klüber Summit SH 46 XS is intended for oil-injected rotary screw compressors with oil change intervals of up to 10,000 operating hours. Used compressors can be switched over from conventional mineral oils to Klüber Summit SH 46 XS. Klüber Summit SH 46 XS is neutral towards most elastomers typically used in air compressors - no leakage is to be expected. Klüber Summit SH 46 XS offers very good oxidation stability due to the synthetic base oil, thus minimising oxidation residues in the compressor and extending oil change intervals and the service life of the oil separator. The product contains special inhibitors to largely prevent the formation of residues in the compressors. Owing to the evaporation stability of the base oil, the oil vapour content in the compressed air can be considerably reduced compared to conventional mineral oils. This contributes to a reduction of oil consumption and clean compressed air; gumming of pneumatic valves in the compressed air circuit can be prevented as well due to the low oil content in the compressed air.

Details

Performance, Features & Benefits of Klüber Summit SH 46 XS are:

Klüber Summit SH 46 XS contains an antifoam additive without silicone
Low maintenance and operating costs due to long oil change intervals of up to 10,000 operating hours in oil-injected screw-type compressors
asy compressor oil conversion due to neutral behaviour of the oil towards seals
Low tendency to evaporation and thus low impact of the oil vapour on the compressed air
Longer service life of oil filters, activated carbon filters and oil separators
Low formation of oxidation residues contributing to reduced operating costs through longer oil filter and oil separator lifetimes

If you have any questions, please contact OilOnline Technical Helpdesk

Product Description Klüber Summit SH 46 XS

Klüber Summit SH 46 XS is a special oil for air compressors based on synthetic hydrocarbon, additives and an antifoam solution free from silicone. The oil is miscible with mineral oils and synthetic hydrocarbons, but not with polyglycol-based products.

Typical Characteristics

Product specifications		Method	Klüber Summit SH 46 XS
Article number			050140
Colour space			colourless
Appearance			clear
Density	20 °C	DIN 51757	approx. 0.85 g/cm³
Kinematic viscosity	40 °C	DIN 51562 pt. 01/ASTM D-445/ASTM D 7042	approx. 46 mm²/s
Kinematic viscosity	100°C	DIN 51562 pt. 01/ASTM D-445/ASTM D 7042	approx. 7.2 mm²/s
Viscosity index		DIN ISO 2909	>= 115
Foam test, sequence I/24 °C		ASTM-D 892, ISO 6247	<= 50/0 ml
Foam test, sequence II/ 93.5 °C		ASTM-D 892, ISO 6247	<= 50/0 ml
Foam test, sequence III/24°C		ASTM D 892, ISO 6247	<= 50/0 ml
Copper corrosion, 24 h/100°C		DIN EN ISO 2160	1 - 100 corrosion degree
Demulsifying capacity	54 °C	DIN 51599, ASTM D 1401	40/37/3 ml
Pour point		DIN ISO 3016	<= -36 °C
Flash point, Cleveland, open-cup apparatus		DIN EN ISO 2592	>= 240 °C
Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx.			60 months

Application notes

Our experience so far has shown that the raw materials of Klüber Summit SH 46 XS are paint-compatible and thus do not interfere with the quality of a paint finish. In view of the many different paint systems and testing criteria, individual paint compatibility tests should be performed by the user prior to series application. When selecting the oil viscosity for air compressors, please observe the manufacturer's instructions. When switching a used compressor to Klüber Summit SH 46 XS, drain the old oil from the whole circuit while still warm. We also recommend changing all oil filters and separators. Then refill the compressor with Klüber Summit SH 46 XS. If the previously used oil was a mineral oil, oxidation residues may be present in the compressor. Typical symptoms are black discolouration or impurities in the previously used oil. As such residues can affect the service life of the fresh Klüber Summit SH 46 XS oil, we recommend cleaning the compressor with Klüber Summit Varnasolv prior to changeover. For further information please turn to your contact person at Klüber Lubrication or see the product information leaflet on Klüber Summit Varnasolv. After changing over to Klüber Summit SH 46 XS, we recommend determining the oil change interval through an oil analysis or the Klüber Summit TAN Kit.

Product Questions

Customer Questions