7 warehouses in Europe
Klüber Summit TM 15
97% supplied in 5 working days
Shipping costs for all EU countries are calculated at checkout.
VAT number required
during checkout
Pay online or by invoice (within 30 days)
Klüber Summit TM 15
Air compressor oils enabling oil change intervals up to 3,000 operating hours
Application Klüber Summit TM 15
Klüber Summit TM 15 and Klüber Summit TM 20 were especially developed for the lubrication of oil-injected screwtype compressors. Under normal operating conditions, these oils achieve oil change intervals of up to 3,000* operating hours. Used compressors can be converted from conventional mineral oils to Klüber Summit TM 15 or 20, which are neutral towards most elastomers typically used in air compressors - no leakage is to be expected. Klüber Summit TM oils were developed for compressors where the use of fully synthetic oils is undesirable or where such oils would not make sense economically due to a limited number of operating hours per year. Klüber Summit TM 15 and TM 20 have a synthetic base oil component, providing good resistance to oxidation, reducing the formation of residues in the compressor. The oils contain specific inhibitors to keep compressors clean to improve compressor efficiency. *Normal operating conditions are: discharge temperature max. 85 °C, final discharge pressure max. 8 bar, dry and clean intake air and circulation rate of the oil in the compressor less than 1.5. For higher temperatures, please turn to your contact at Klüber Lubrication.
Performance, Features & Benefits of Klüber Summit TM 15 are:
- Low maintenance and operating costs due to oil change intervals of up to 3,000 operating hours in oil-injected screw-type compressors
- Good capacity for dissolving residues, leading to a cleaner oil circuit
- Low formation of oxidation residues in the oil circuit
- Good separation and processing of condensate
- Comply with the requirements acc. to DIN 51506-VDL and ISO 6521-1
If you have any questions, please contact OilOnline Technical Helpdesk
Product Description Klüber Summit TM 15
For your compressed air applications, you need to be reliably supplied with the necessary volume of compressed air at a specific pressure and with a specific quality at all times. Klüber Summit TM 15 and TM 20 are available in viscosities ISO VG 46 and ISO VG 68. They are high-performance base products for air compressors based on a thoroughly cleaned, hydrogenated mineral oil and special additives (Syntholate). These oils are miscible with mineral oils and synthetic hydrocarbons
Typical Characteristics
| Product specifications | Method |
Klüber Summit TM 15 |
|
| Article number | 050110 | ||
| Appearance | clear | ||
| Density | 20 °C | DIN 51757 | approx. 0.87 g/cm³ |
| Colour space | colourless | ||
| Flash point, Cleveland, open-cup apparatus | DIN EN ISO 2592 | >= 220 °C | |
| Kinematic viscosity | 40°C | DIN 51562 pt. 01/ASTM D-445/ASTM D 7042 | approx. 46 mm²/s |
| Kinematic viscosity | 100°C | DIN 51562 pt. 01/ASTM D-445/ASTM D 7042 | approx. 6.7 mm²/s |
| Viscosity index | DIN ISO 2909 | >= 90 | |
| Copper corrosion, 3 h/100 °C | DIN EN ISO 2160 | 1 - 100 corrosion degree |
|
| Pour point | DIN ISO 3016 | <= -30 °C | |
| Demulsifying capacity | 54 °C | DIN 51599, ASTM D 1401 | 40/37/3 ml |
| Foam test, sequence I/24 °C | ASTM-D 892, ISO 6247 | <= 50/0 ml | |
| Foam test, sequence II/ 93.5 °C | ASTM-D 892, ISO 6247 | <= 50/0 ml | |
| Foam test, sequence III/24°C | ASTM D 892, ISO 6247 | <= 50/0 ml | |
| Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx. |
36 months |
Application notes
When selecting the oil viscosity for air compressors, please observe the manufacturer's instructions. When switching a used compressor to Klüber Summit TM 15 or TM 20, drain the old oil from the whole circuit while still warm. We also recommend changing all oil filters and separators. Then refill the compressor with Klüber Summit TM 15 or TM 20. Incompatibility reactions due to the changeover or mixing with the previously used oil are not expected. If the previously used oil was a mineral oil, oxidation residues may be present in the compressor. Typical symptoms are black discoloration or impurities in the previously used oil. As such residues can affect the service life of the fresh Klüber Summit TM oil, we recommend cleaning the compressor with Klüber Summit Varnasolv prior to changeover. For further information please turn to your contact person at Klüber Lubrication or see the product information leaflet on Klüber Summit Varnasolv. After changing over to Klüber Summit TM 15 or Klüber Summit TM 20, we recommend determining the oil change interval through an oil analysis or the Klüber Summit TAN Kit.
Satisfied customers:
Quality brands only
genuine packages
Save costs
take control of your costs
save time and money
Global Deliveries
sea containers
air freight worldwide
