7 warehouses in Europe
Klüber Syntheso HT 1500
97% supplied in 5 working days
Shipping costs for all EU countries are calculated at checkout.
VAT number required
during checkout
Pay online or by invoice (within 30 days)
Klüber Syntheso HT 1500
Synthetic long-term and high-temperature oils
Application Klüber Syntheso HT 1500
SYNTHESO HT oil are used for the lubrication of spur and bevel gears and rolling bearings such as spherical roller bearings in bowl mill crushers, plain bearings and gear couplings subject to high temperatures and high surface pressure. Substantially less friction and powerful protection against wear are major benefits of these products.
Performance, Features & Benefits of Klüber Syntheso HT 1500 are:
- Synthetic long-term and high-temperature oils
- Very good viscosity/ temperature properties
- Reduce friction
- High scuffing load capacity
- Good anti-wear properties
If you have any questions, please contact OilOnline Technical Helpdesk
Product Description Klüber Syntheso HT 1500
SYNTHESO HT are long-term and high-temperature oils on a polyglycol basis. They have a high scuffing load capacity and protect well against wear. In the FZG test, DIN 51 354, A/8, 3/90, their scuffing load stage is >12 and their work-related change in weight is ≤ 0.2 mg/kWh. SYNTHESO HT oils have excellent ageing and oxidation stability and very good viscosity/ temperature properties and are ideal for high temperatures.
Typical Characteristics
| Product specifications | Method |
Klüber Syntheso HT 1500 |
|
| Article number | 012107 | ||
| ISO viscosity grade | DIN ISO 3448 | 1 500 | |
| Lower service temperature | 0 °C / 32 °F | ||
| Upper service temperature | 150 °C / 302 °F | ||
| Density | 20 °C | DIN 51757 | approx. 1.09 g/cm³ |
| Kinematic viscosity | 40 °C | DIN 51562 pt. 01/ASTM D-445/ASTM D 7042 | approx. 1 500 mm²/s |
| Kinematic viscosity | 100 °C | DIN 51562 pt. 01/ASTM D-445/ASTM D 7042 | approx. 230 mm²/s |
| Viscosity index | DIN ISO 2909 | >= 220 | |
| Pour point | <= 0 °C | DIN ISO 3016 | |
| Flash point, Cleveland, open-cup apparatus | >= 200 °C | DIN EN ISO 2592 | |
| FZG scuffing test, change in weight | DIN ISO 14635-1, A/8.3/90 |
<= 0.2 mg/kWh |
|
| FZG scuffing test, scuffing load stage | DIN ISO 14635-1, A/8.3/90 | > 12 | |
| Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx. |
36 months |
Application notes
SYNTHESO HT oils are often used for immersion lubrication. Immersion circulation and injection lubrication are supported as well provided that you do not exceed the viscosity limits of the pumps or the entire system. SYNTHESO HT oils are not miscible with mineral oils and synthetic hydrocarbons. Therefore, you are advised to clean the lubrication points before SYNTHESO HT oils are introduced. Because of their high viscosity, be careful about rinsing with SYNTHESO HT. Experience shows that contamination of up to about 5% with mineral oils and hydrocarbons will not be critical. Beyond that level, you should drain the oil once more when it is at operating temperature and completely refill the system with fresh oil. SYNTHESO HT oils are neutral towards ferrous materials and virtually all non-ferrous metals. There may be increased wear when the contact surfaces of design elements made of aluminium or aluminium alloys are exposed to dynamic stress (sliding speed and high loads). It may be necessary to carry out wear tests. Depending on temperature and time of exposure, synthetic lubricants based on polyglycol may affect the functionality of rubber-elastic sealing materials. Seals made of NBR materials (acrylonitrile butadiene rubber) can be used at permanent temperatures up to 100 °C. For higher temperatures, it is advisable to use seals based on FPM (fluoropolymers) as those elastomers are resistant to SYNTHESO HT oils. Be aware that different elastomer qualities from the same or different manufacturers will behave differently. Coats of paints may be attacked by synthetic lubricants. When applying SYNTHESO HT oils we recommend the use of twocomponent (reactive) paints for interior coating. Oil inspection glasses should preferably be made of natural glass or polyamide materials. Other transparent plastics such as plexiglass tend to crack under stress. It is advisable to test the suitability of design materials, especially those intended for series application.
Satisfied customers:
Quality brands only
genuine packages
Save costs
take control of your costs
save time and money
Global Deliveries
sea containers
air freight worldwide
You may also be interested in
-
![Klüber Syntheso HT 1000]()
Klüber Syntheso HT 1000Starting at: € 31,41 / Kg
