Klüber Tyreno Fluid 12/25 V

Performance, Features & Benefits of Klüber Tyreno Fluid 12/25V are:

• Reliable operation of vacuum pumps as well as installations and components using gaseous oxygen due to low oil vapour pressure; due to very low tendency to thermal ageing; due to good chemical stability and resistance to aggressive media; due to high oxygen pressure surge resistance (see product data)
• Versatile sliding agent for industrial handling of oxygen, air, carbon dioxide, inert and other gases as well as their condensates; for maintenance and care of breathing apparatus on the low pressure side
• Each production batch is checked for its reactivity with oxygen

Typical Characteristics

Application notes

All surfaces to be wetted must be thoroughly cleaned prior to product application. The friction and lubrication points of these surfaces/components must be clean and bright (i.e. free from oil, grease, dirt particles or perspiration, etc.). For optimum lubrication results, we recommend cleaning the friction points with clean white spirit and then Klüberalfa XZ 3-1, ensuring residue-free surfaces when dried. Application to equipment, valves and fittings carrying oxygen must also be "oxygen clean" to attain a "ready for oxygen service" condition. For use at low temperatures, e.g. where components are in direct contact with liquid oxygen, experimental testing and approval by the component manufacturer is required since the design and power ratings, for example in actuator gears, may play a decisive role in this context. For optimised service life, please contact our service engineers. * Notes on the lower service temperature limit (see product data): The service temperature is defined on the basis of physical and mechanical-dynamic product characteristics. At very low temperature and pressure, however, where oxygen remains fluid, the product retains its stability in liquid oxygen tests. If the product is intended to be used below the lower service temperature limit, it has to be checked if reliable operation of the component is ensured under these conditions. In cases of doubt, application-specific tests would have to be performed. ** Notes on the upper service temperature limit (see product data): The service temperature is defined on the basis of physical and mechanical-dynamic product characteristics. When working in an atmosphere with added oxygen and/or under high oxygen partial pressure, the upper service temperature limit may be reduced due to a reaction with oxygen. To assess whether use in a particular application is safe, please refer to the product data section in this product information. In cases of doubt, application-specific tests would have to be performed.