7 warehouses in Europe
Klüber Wolfracoat C Fluid
97% supplied in 5 working days
Shipping costs for all EU countries are calculated at checkout.
VAT number required
during checkout
Pay online or by invoice (within 30 days)
Klüber Wolfracoat C Fluid
High-temperature lubricating compound
Application Klüber Wolfracoat C Fluid
WOLFRACOAT C FLUID was developed as a lubricating compound for surfaces subject to high thermal loads, as e.g. in rotary kilns in the base material industry (chemical industry, cement, ore processing, etc.) between the inner surfaces of the tyres and the kiln shell’s slide elements as well as the running surfaces of the axial supports. WOLFRACOAT C FLUID is also suitable for the lubrication of pouring ladles used in the steel industry, and could also be used as a screw compound for hightemperature bolt and screw connections.
Performance, Features & Benefits of Klüber Wolfracoat C Fluid are:
- Very good corrosion protection → increased component lifetime
- Ready-for-use → just mix vigorously
- Low consumption → low costs, high efficiency
- Easy application → reduces maintenance time
- Easier to mix in smaller canisters → less effort required
- No part-used stock → the 5 l pack size matches the tank of the Klübermatic KD spray pump
If you have any questions, please contact OilOnline Technical Helpdesk
Product Description Klüber Wolfracoat C Fluid
WOLFRACOAT C FLUID is a viscous high-temperature release agent and lubricating compound based on a mineral and ester oil mixture. It contains solid lubricants, metal pigments and an inorganic thickener. The base fluid starts to evaporate at approx. 200°C, leaving a solid lubricant film, which separates frictional surfaces (dry lubrication).
Typical Characteristics
| Product specifications | Method |
Klüber Wolfracoat C Fluid |
|
| Article number | 099118 | ||
| Solid lubricants, percentage | approx. 16 % by weight | ||
| Lower service temperature | -25 °C / -13 °F | ||
| Upper service temperature | 1050 °C / 1922 °F | ||
| Colour space | grey | ||
| Texture | homogeneous | ||
| Texture | very viscous | ||
| Density | 20 °C | approx. 1.03 g/cm³ | |
| Worked penetration, acc. to Klein, lower limit value | 25 °C | 800 x 0.1 mm | |
| Worked penetration, acc. to Klein, upper limit value | 25 °C | 900 x 0.1 mm | |
| Kinematic viscosity of the base oil | 40 °C | DIN 51562 pt. 01/ASTM D-445/ASTM D 7042 | approx. 150 mm²/s |
| Ignition temperature | >= 370 °C | DIN 51794 | |
| Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx. |
24 months |
Application notes
WOLFRACOAT C FLUID is usually applied to the area between the tyre and the kiln shell with the Klübermatic KD manual spray jet equipment (other commercially available spray devices can also be used). In other cases the product can also be applied by brush. Each tyre should be relubricated once a week with 2-3 litres of WOLFRACOAT C FLUID according to the tyre width. It is important to ensure relative motion between the tyre and the kiln shell. We recommend reference to the relative motion value stated by the OEM (between 10 and 30 mm). NOTE: Always shake WOLFRACOAT C FLUID vigorously prior to application, as the solid lubricants tend to settle out during storage. Without agitation, the spray jet would be filled only with the oil component, which would not provide dry lubrication following evaporation. Additionally, the oil component has an auto-ignition point of approx. 370 °C which may constitute a risk.
Satisfied customers:
Quality brands only
genuine packages
Save costs
take control of your costs
save time and money
Global Deliveries
sea containers
air freight worldwide
You may also be interested in
-
![Klüber WOLFRAKOTE TOP FLUID]()
Klüber WOLFRAKOTE TOP FLUIDStarting at: € 120,44 / L
