7 warehouses in Europe
Klüberalfa
-
Klüber Klüberalfa DH 3-350 N
Quick orderingMore infoKlüber Klüberalfa DH 3-350 N
Lubricating oil with good wetting properties for plastic friction points
Application KKlüber Klüberalfa DH 3-350 N
Klüberalfa DH 3 N can be used for the wetting of metals and synthetic material parts of various configurations. Due to their good material compatibility, these products should be your first choice for the vehicle interior. Application examples: – Contact surfaces with different material pairings in the dashboard: minimisation of unwanted noises – Impact, rubbing and sliding points inside cars, even of various material pairings – Sliding guides in the centre console, cup holder, navigation screen – Locking mechanism of trays, ventilation flaps, etc. General behaviour towards plastics and elastomers Perfluorinated polyether oils are generally regarded as neutral towards elastomers and plastics (possible exception: highly fluorinated rubber). Despite this, prior to a series application, the compatibility of the lubricant with the material with which it is to come into contact, must be confirmed.
Show moreStarting at: € 107,29 -
Klüber Klüberalfa MR 3
Quick orderingMore infoKlüber Klüberalfa MR 3
Universal sliding fluid for seals, guideways and plastic friction points
Application Klüber Klüberalfa MR 3
Due to its good compatibility, Klüberalfa MR 3 may be used in combination with most materials, e.g. leather, textile or plastic, in car interiors or on the car body. Klüberalfa MR 3 is compatible with most thermoplastics or thermosetting plastics used, for example, in dashboards, seat and sunroof sliding rails, arm rests, seat adjustment mechanisms, door and sunroof seals. Perfluorinated polyether oils are generally regarded as neutral towards elastomers and plastics (possible exception: highly fluorinated rubber). Nevertheless we recommend testing compatibility with the material to be used, especially prior to series application.
Show moreStarting at: € 298,00 / L -
Klüber Klüberalfa YV 93-302
Quick orderingMore infoKlüber Klüberalfa YV 93-302
Sliding agent for valves, fittings and installations carrying oxygen under high partial pressure
Application Klüber Klüberalfa YV 93-302
Klüberalfa YV 93-302 is used as a lubricant for valves, fittings and installations carrying gaseous and/or liquid oxygen or in chemical installations and equipment requiring high resistance to various gases. (Conclusion by analogy based on chemical composition. We recommend users conduct their own component tests under conditions as occur in practice). The product's high pressure-absorption capacity and consistent friction values over a wide temperature range ensure constant actuation forces. Test results show the product's usability for an O2 content > 21 % by vol. under operating conditions specified in the product data section of this product information leaflet. Possible applications are: – Oxygen valves – Peripheral aggregates of chemical installations – Hose couplings, e.g. oxygen pipe connections, sliding and plain bearings, bolts, slideways, etc. – Steel and heavy industry – Assembly aid for most rubber-elastic materials and plastics – For industrial handling, maintenance and care of oxygen components Behaviour towards metal, elastomers and plastics Klüberalfa YV 93-302 is normally neutral towards metallic materials, plastics and elastomers within the given temperature range. Nevertheless, we recommend checking the compatibility of the lubricant with the materials in contact prior to its introduction.
Show moreStarting at: € 414,56 -
Klüber Klüberalfa XZ 3-1
Quick orderingMore infoKlüber Klüberalfa XZ 3-1
Dispersant, solvent and detergent
Application Klüber Klüberalfa XZ 3-1
As solvent and detergent: Klüberalfa XZ 3-1 may be used to clean friction points prior to the application of PFPE products such as BARRIERTA L55/2. When used on clean surfaces, both the adhesion and the performance of such lubricants are significantly improved. To attain optimum lubrication results, we recommend cleaning the friction point prior to initial application first with white spirit 180/210 and then with Klüberalfa XZ 3-1. Prior to initial lubrication, the friction point should be bright (i.e. free of any residues) and free of dirt particles. As a dispersant: PFPE greases dispersed with Klüberalfa XZ 3-1 are used for minimum-quantity lubrication of bearings, chains, small gears, seals and many other components. With Klüberalfa XZ 3-1, the active substance content in dispersions of the Klüberalfa product family can be adjusted to individual needs without difficulty. Due to its high dispersive capacity, Klüberalfa XZ 3-1 is used as a flushing fluid to remove used PFPE grease from components that are difficult to clean. The cleaned surfaces remain free of grease and bright. It may be advisable to protect them against corrosion after cleaning. Food-processing and pharmaceutical industries: Klüberalfa XZ 3-1 is NSF H1 registered and therefore complies with FDA 21 CFR § 178.3570. The product was developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical or animal feed industries. The use of Klüberalfa XZ 3-1 can contribute to increase reliability of your production processes. We nevertheless recommend conducting an additional risk analysis, e.g. HACCP.
Show more€ 517,78 / L -
Klüber Klüberalfa YM 3-30 N
Quick orderingMore infoKlüber Klüberalfa YM 3-30 N
Lubricating oils for synthetic material friction points with good wetting properties
Application Klüber Klüberalfa YM 3-30 N
Klüberalfa YM 3-30 N and Klüberalfa YM 3-65 N can be used for the wetting of metals and synthetic material parts of various configurations. Due to their good material compatibility, these products should be your first choice for the vehicle interior. Application examples: – Guide bars of headrests – Impact, rubbing and sliding points, even of various material pairings, to minimise annoying noises in the components such as fittings, sliding guides in the centre console, cup holder, navigation screen, locking mechanism of trays, ventilation outlet valve, etc. General conduct toward synthetic materials and elastomers: Perfluoropolyethers are generally to be classified as widely neutral (possible exception: high fluorinated FKMs) in comparison to elastomers and synthetic materials. Despite this, prior to a series application, the compatibility of the lubricant with the material with which it is to come into contact, must be confirmed.
Show moreStarting at: € 586,03 -
Klüber Klüberalfa DH 3-100
Quick orderingMore infoKlüberalfa DH 3-100
High-temperature lubricating oils for sintered metal plain bearings and plastic components
Application Klüberalfa DH 3-100
Sintered metal components Klüberalfa DH 3 oils are used for the impregnation of sintered metal plain bearings subject to high temperatures where longterm lubrication is required. Due to their high thermal and chemical stability, additional lubrication with, for example, MIKROZELLA is normally not necessary. Plastic components Klüberalfa DH 3 oils are suitable for the lubrication of both plastic components and metal-plastic sliding contact surfaces. These clear, colourless and odourless oils do not form unwanted resins. Klüberalfa DH 3 oils are generally regarded as neutral towards elastomers and plastics (possible exception: perfluorinated rubber), so no negative effect on the material is to be expected. Nevertheless compatibility with the materials should be tested, especially prior to series application.
Show moreStarting at: € 736,99 -
Klüber Klüberalfa DH 3-150
Quick orderingMore infoKlüber Klüberalfa DH 3-150
High-temperature lubricating oils for sintered metal plain bearings and plastic components
Application Klüberalfa DH 3-150
Sintered metal components Klüberalfa DH 3 oils are used for the impregnation of sintered metal plain bearings subject to high temperatures where longterm lubrication is required. Due to their high thermal and chemical stability, additional lubrication with, for example, MIKROZELLA is normally not necessary. Plastic components Klüberalfa DH 3 oils are suitable for the lubrication of both plastic components and metal-plastic sliding contact surfaces. These clear, colourless and odourless oils do not form unwanted resins. Klüberalfa DH 3 oils are generally regarded as neutral towards elastomers and plastics (possible exception: perfluorinated rubber), so no negative effect on the material is to be expected. Nevertheless compatibility with the materials should be tested, especially prior to series application.
Show moreStarting at: € 783,08 -
Klüber Klüberalfa MR 3-800
Quick orderingMore infoKlüber Klüberalfa MR 3-800
Universal sliding fluid for seals, guideways and plastic friction points
Application Klüber Klüberalfa MR 3-800
Due to its good compatibility, Klüberalfa MR 3 may be used in combination with most materials, e.g. leather, textile or plastic, in car interiors or on the car body. Klüberalfa MR 3 is compatible with most thermoplastics or thermosetting plastics used, for example, in dashboards, seat and sunroof sliding rails, arm rests, seat adjustment mechanisms, door and sunroof seals. Perfluorinated polyether oils are generally regarded as neutral towards elastomers and plastics (possible exception: highly fluorinated rubber). Nevertheless we recommend testing compatibility with the material to be used, especially prior to series application.
Show moreStarting at: € 647,89 / L -
Klüber Klüberalfa KR 3-730
Quick orderingMore infoKlüber Klüberalfa KR 3-730
Protecting and lubricating fluid for plug-in contacts
Application Klüber Klüberalfa KR 3-730
Klüberalfa KR 3-730 is suitable for the large-batch oiling of plug-in contacts of different shapes and materials which have to the meet high requirements in e.g. telecommunications, automation technology or car manufacture. In-house tests have shown that the protecting effect of Klüberalfa KR 3-370 is best on lead-free tin alloys. Optimum results are achieved with contact forces below 5 N.
Show moreStarting at: € 65,39 / L -
Klüber Klüberalfa DH 3-230
Quick orderingMore infoKlüber Klüberalfa DH 3-230
High-temperature lubricating oils for sintered metal plain bearings and plastic components
Application Klüberalfa DH 3-230
Sintered metal components Klüberalfa DH 3 oils are used for the impregnation of sintered metal plain bearings subject to high temperatures where longterm lubrication is required. Due to their high thermal and chemical stability, additional lubrication with, for example, MIKROZELLA is normally not necessary. Plastic components Klüberalfa DH 3 oils are suitable for the lubrication of both plastic components and metal-plastic sliding contact surfaces. These clear, colourless and odourless oils do not form unwanted resins. Klüberalfa DH 3 oils are generally regarded as neutral towards elastomers and plastics (possible exception: perfluorinated rubber), so no negative effect on the material is to be expected. Nevertheless compatibility with the materials should be tested, especially prior to series application.
Show moreStarting at: € 886,52 / L -
Klüber Klüberalfa HL 3-150
Quick orderingMore infoKlüber Klüberalfa HL 3-150
High-performance PFPE oils for lifetime lubrication under extreme conditions
Application Klüber Klüberalfa HL 3-150
Klüberalfa HL 3 Fluids should be used where lifetime lubrication is desired in combination with stringent operational requirements, such as: – wide ranging extremes of temperature – high vacuum – influence by aggressive chemicals – compatibility with wide ranging elastomer types Thanks to their low evaporation rate, Klüberalfa HL 3 Fluids are also suitable for sensitive applications in clean rooms and in the optical and electronics sectors. When used in sintered metal plain bearings, Klüberalfa HL 3 Fluids excel by means of their low friction coefficients across a wide service temperature range. Behaviour towards elastomers and plastics Perfluorinated polyether oils (PFPE) are generally regarded as neutral towards elastomers and plastics (possible exception: perfluorinated rubber). Nevertheless compatibility with the materials should be tested, especially prior to series application.
Show more€ 1 426,00 -
Klüber Klüberalfa YV 93-1202
Quick orderingMore infoKlüber Klüberalfa YV 93-1202
Premium sliding agent for valves, fittings and installations carrying oxygen under very high partial pressure
Application Klüber Klüberalfa YV 93-1202
Klüberalfa YV 93-1202 is used as a sliding agent for the lubrication of valves, fittings and installations carrying gaseous and/or liquid oxygen, in individual cases subject to gas pressures considerably above 300 bar, or in chemical installations and equipment requiring high resistance to various gases. (Conclusion by analogy based on chemical composition. We recommend users conduct their own component tests using the complete component under conditions similar to series application). The product's high pressure-absorption capacity and consistent friction values over a wide temperature range ensure constant actuation forces. Test results show the product's usability for an O2 content > 21 % by vol. under operating conditions specified in the product data section of this product information leaflet. Possible applications are: – Oxygen valves – Peripheral aggregates of chemical installatons – Hose couplings, e.g. oxygen pipe connections, sliding and plain bearings, bolts, slideways, etc. – Steel and heavy industry – Assembly aid for most rubber-elastic materials and plastics – For industrial handling, maintenance and care of oxygen components Behaviour towards metal, elastomers and plastics Klüberalfa YV 93-1202 is normally neutral towards metallic materials, plastics and elastomers within the envisaged temperature range. Nevertheless, we recommend checking the compatibility of the sliding agent with materials prior to the introduction of this product.
Show more€ 1 994,20 / Kg -
Klüber Klüberalfa KRA 3-730
Quick orderingMore infoKlüber Klüberalfa KRA 3-730
High-performance lubricant for plug-in contacts
Application Klüber Klüberalfa KRA 3-730
Klüberalfa KRA 3-730 is suitable for the large-batch lubrication of plug-in contacts of different shapes and materials which have to meet high requirements in e.g. telecommunications, automation technology or car manufacture.
Show more€ 638,08 / L
Our customers value us
"We like your site, it shows that you are experts in lubricants!"
-- Ian Adair
"You deliver quicker than our previous UK supplier!"
-- Cris Scullion
"Surprise to us!
We paid to much in the past"
-- Stuart Wyatt
Our customers value us
"We like your site, it shows that you are experts in lubricants!"
-- Ian Adair
"You deliver quicker than our previous UK supplier!"
-- Cris Scullion
"Surprise to us!
We paid to much in the past"
-- Stuart Wyatt