7 warehouses in Europe
Klüberfluid
-
Klüber Klüberfluid NH1 4-005
Quick orderingMore infoKlüber Klüberfluid NH1 4-005
Synthetic barrier fluid for mechanical seals
Application Klüber Klüberfluid NH1 4-005
Klüberfluid NH1 4-005 can be used as a barrier fluid in mechanical seals operating under inert gas conditions. Mechanical seals have been used in mixers, driers, mills, kneaders, reactors and pumps in the chemical and the pharmaceutical industry for many years. Klüber Lubrication offers a range of oils that were especially developed for use as a barrier medium in mechanical seals. The more the seal is stressed in terms of pressure, speed and heat, the lower should the oil's viscosity be. For naturally circulating barrier fluids, the selected oil viscosity is normally approx. 5 mm²/s, as is the case with Klüberfluid NH1 4-005. Which type of barrier fluid should be chosen depends on the type of seal elastomer as well as on the application's process conditions. For forced circulation, the oil should have a viscosity of 12 - 90 mm²/s. Klüber Lubrication offers solutions also for these cases. Our experts will be pleased to provide advice.
Show moreStarting at: € 23,11 / L -
Klüber Klüberfluid 9 R 100
Quick orderingMore infoKlüber Klüberfluid 9 R 100
Assembly and anticorrosion fluid
Application Klüber Klüberfluid 9 R 100
Klüberfluid 9 R 100 is particularly suitable for automotive brake components. It can also be used as an anticorrosion agent for steel parts, protecting them while in stock and during transport between production and assembly, with the advantage that it does not have to be removed prior to the fitting of SBR and EPDM elastomer parts. When used as an assembly fluid, Klüberfluid 9 R 100 facilitates the precise joining of individual components and thus supports functional reliability, preventing damage to the seals during fitting. Klüberfluid 9 R 100 is used as an assembly aid, anticorrosion agent and functional lubricant, e.g. to attain the roll-back effect of brake pistons. Its excellent wetting properties in conjunction with high lubricity have a favourable effect on initial friction, especially when metal and elastomer materials are paired.
Show moreStarting at: € 24,43 / L -
Klüber Klüberfluid D-F 1 Ultra
Quick orderingMore infoKlüber Klüberfluid D-F 1 Ultra
Repair lubricant for open girth gear drives
Application Klüber Klüberfluid D-F 1 Ultra
Klüberfluid D-F 1 ULTRA was specially developed for repair lubrication of damaged open gears. It is also highly suitable for rapid running-in of new or newly aligned gear sets such as those used with rotary kilns, tube kilns and winches, for example in the cement industry, power generation, mining, chemical industry, paper and sugar industry as well as the marine sector.
Show moreStarting at: € 127,35 / Kg -
Klüber Klüberfluid C-F 3 Ultra
Quick orderingMore infoKlüber Klüberfluid C-F 3 Ultra
Operational lubricant for large girth gear drives
Application Klüber Klüberfluid C-F 3 Ultra
Klüberfluid C-F 3 ULTRA can be used for immersion, paddle wheel, circulation and spray lubrication of large girth gear drives. Application possibilities are not restricted, neither by gear sizes nor power ratings. A peripheral speed of 10.0 m/s should not be exceeded. Such drives are found in rotary kilns, tube mills, drums and similar machinery used in the cement, lime, gypsum, mining and chemical industries and in power plants. Further applications are found in sugar and paper production as well as in marine and offshore technology
Show moreStarting at: € 26,71 / Kg -
Klüber Klüberfluid C-F 3 S Ultra
Quick orderingMore infoKlüber Klüberfluid C-F 3 S Ultra
Operational lubricant for large girth gear drives
Application Klüber Klüberfluid C-F 3 S Ultra
Klüberfluid C-F 3 S ULTRA is primarily used for spray lubrication of large gear rim/pinion drives. It can be used with all gear sizes and power ratings. A peripheral speed of 10 m/s should however not be exceeded. Such drives are primilary found in rotary kilns, tube mills, drums and similar machinery used in the cement, lime, gypsum, mining and chemical industries as well as in coal-fired power stations. Further applications are found in sugar and paper production as well as in the marine and offshore sector.
Show moreStarting at: € 27,88 / Kg -
Klüber Klüberfluid C-F 4 Ultra
Quick orderingMore infoKlüber Klüberfluid C-F 4 Ultra
Transparent operational lubricant for large open gear drives
Application Klüber Klüberfluid C-F 4 Ultra
Klüberfluid C-F 4 Ultra can be applied by immersion, transfer paddle wheel, pressure fed circulation and spray lubrication systems. It can be used with all gear sizes and power ratings. A peripheral speed of 7 m/s should however not be exceeded. Open gear drives are found in rotary kilns, tube mills, drums and similar machinery used in the cement, lime, gypsum, mining and chemical industries as well as in power stations. It can also be used for medium-size to large girth gear drives in sugar and paper production as well as in the marine and offshore sector.
Show moreStarting at: € 31,80 / Kg -
Klüber Klüberfluid C-F 3 M Ultra
Quick orderingMore infoKlüber Klüberfluid C-F 3 M Ultra
Operational lubricant for large girth gear drives
Application Klüber Klüberfluid C-F 3 M Ultra
Klüberfluid C-F 3 M ULTRA is primarily used for the lubrication of rather large gear-rim/pinion drives. It can be used with all gear sizes and power ratings. A peripheral speed of 12 m/s should however not be exceeded. Klüberfluid C-F 3 M ULTRA was especially developed for ships and the offshore sector, where most of such drives are found. However, application is also in other industries.
Show moreStarting at: € 32,30 / Kg -
Klüber Klüberfluid B-F 1 Ultra
Quick orderingMore infoKlüber Klüberfluid B-F 1 Ultra
Running-in lubricant for open drives
Application Klüber Klüberfluid B-F 1 Ultra
Klüberfluid B-F 1 Ultra is used in the splash, paddle wheel or circulation lubrication of open gears for running-in lubrication or tooth profile correction. Possible uses are limited neither by component size nor by driving power. The peripheral speed should not exceed 8.5 m/s. Drives of this kind are mainly used in rotary kilns, tube mills, and similar machines as are used in the cement, lime, gypsum, mining and chemical industries. Klüberfluid B-F 1 Ultra is not suitable for the lubrication of (rolling or sliding) bearings.
Show moreStarting at: € 32,96 / Kg -
Klüber Klüberfluid B-F 2 Ultra
Quick orderingMore infoKlüber Klüberfluid B-F 2 Ultra
Light-coloured running-in and correction lubricant for open gear rim/pinion drives
Application Klüber Klüberfluid B-F 2 Ultra
Klüberfluid B-F 2 Ultra is used for the running-in lubrication of new, open drives by means of immersion, transfer, circulation and spray lubrication, or for tooth flank correction of large gear drives that have been in use for some time. The use of Klüberfluid B-F 2 Ultra is not subject to any limitations regarding the size or power of the drives. A peripheral speed of 8.5 m/s should not be exceeded. Such drives are primarily to be found in rotary kilns, tubular mills and similar machinery in the cement, lime, gypsum and chemical industries and the mining sector. Klüberfluid B-F 2 Ultra must not be used for plain or rolling bearings.
Show moreStarting at: € 32,74 / Kg -
Klüber Klüberfluid C-F 7 Ultra
Quick orderingMore infoKlüber Klüberfluid C-F 7 Ultra
Operational lubricant for large, open girth gear drives
Application Klüber Klüberfluid C-F 7 Ultra
Klüberfluid C-F 7 Ultra can be applied by immersion, transfer paddle wheel, circulation or spray lubrication systems. It can be used with all gear sizes and power ratings. A peripheral speed of 10 m/s however should not be exceeded. Such drives are mostly found in rotary kilns, tube mills, drums and similar machinery used in the cement, lime, gypsum, mining and chemical industries as well as in coal-fired power stations. Further applications are in sugar and paper production as well as in the marine and offshore sector.
Show moreStarting at: € 36,02 / Kg -
Klüber Klüberfluid C-F 8 Ultra
Quick orderingMore infoKlüber Klüberfluid C-F 8 Ultra
Operational lubricant for large girth gear drives
Application Klüber Klüberfluid C-F 8 Ultra
Klüberfluid C-F 8 ULTRA can be applied by immersion, transfer paddle wheel, pressure fed circulation and total loss spray lubrication systems. It can be used with all gear sizes and power ratings. A peripheral speed of 8 m/s however should not be exceeded. Such drives are mostly found in rotary kilns, tube mills, drums and similar machinery used in the cement, lime, gypsum, mining and chemical industries as well as in coal-fired power stations. Further applications are found in sugar and paper production as well as in the marine and offshore sector
Show more€ 31,21 / Kg
Our customers value us
"We like your site, it shows that you are experts in lubricants!"
-- Ian Adair
"You deliver quicker than our previous UK supplier!"
-- Cris Scullion
"Surprise to us!
We paid to much in the past"
-- Stuart Wyatt
Our customers value us
"We like your site, it shows that you are experts in lubricants!"
-- Ian Adair
"You deliver quicker than our previous UK supplier!"
-- Cris Scullion
"Surprise to us!
We paid to much in the past"
-- Stuart Wyatt