7 warehouses in Europe
Klüber
-
Klüber Klübersynth GE 4 75W90
Quick orderingMore infoKlüber Klübersynth GE 4 75 W 90
Synthetic high-performance gear oil
Application Klüber Klübersynth GE 4 75 W 90
Klübersynth GE 4 75 W 90 is used for the lubrication of spur, bevel and hypoid gears requiring maximum wear protection and service life, even when exposed to impact loads. Klübersynth GE 4 75 W 90 is suitable for drives in rail vehicles, industrial robots, textile machines and forming presses.
Show moreStarting at: € 29,78 / L -
Klüber Summit DSL 125
Quick orderingMore infoKlüber Summit DSL 125
Fully synthetic air compressor oils for oil change intervals up to 8,000 operating hours
Application Klüber Summit DSL 125
The Klüber Summit DSL 32 … 68 oils have been especially designed for oil change intervals up to 8,000 operating hours* in oil-injected screw-type compressors. Klüber Summit DSL 32 and 46 can also be used for the lubrication of centrifugal compressors, whereas Klüber Summit DSL 68 ... 125 is particularly suitable for the lubrication reciprocating piston compressors. Klüber Summit DSL oils are used for compressors that were previously run with conventional mineral oils. These oils are neutral towards most elastomer seals used in air compressors, therefore leakage is not to be expected. Klüber Summit DSL 32 oils are mainly used in reciprocating piston compressors which do not achieve the desired maintenance intervals when using mineral oils or which show severe residue formation (carbon buildups) on valves and in the compression chamber. Klüber Summit DSL 32, 46, and 68 are biodegradable and can therefore be used in eco-sensitive applications. Klüber Summit DSL oils offer good oxidation stability due to the synthetic base oil, thus minimizing oxidation residues in the compressors and extending oil change intervals and the service life of oil filters and separators (screw-type compressors) and valves (reciprocating piston compressors).
Show moreStarting at: € 29,35 / L -
Klüber Summit HySyn FG 46
Quick orderingMore infoKlüber Summit HySyn FG 46
Fully synthetic compressor oils for the food-processing and pharmaceutical industry
Application Klüber Summit HySyn FG 46
Klüber Summit HySyn oils can be used for oil-injected screwtype compressors, reciprocating piston compressors and centrifugal compressors. Klüber Summit HySyn FG oils are intended for use in compressors of the food-processing and pharmaceutical industry requiring oil-free compressed air (without oil vapour which cannot be removed by the oil separator). Klüber Summit HySyn FG oils can also be used for the lubrication of gears in oil-free screw-type compressors. Owing to their good stability, these oils are also suitable for lowtemperature applications in industrial gears. Furthermore, Klüber Summit HySyn FG 32-46-68 oils are used in chains, particularly those operating at low temperatures, e.g. in freezing tunnels.
Show moreStarting at: € 24,98 / L -
Klüber Summit NGSH 150
Quick orderingMore infoKlüber Summit NGSH 150
Synthetic gas compressor lubricants
Application Klüber Summit NGSH 150
Klüber Summit NGSH are designed for rotary screw and reciprocating compressors in natural gas service. Due to the varying make-up of gases and operating conditions, please contact your local Klüber representative for specific product recommendations.
Show moreStarting at: € 27,46 / L -
Klüber Summit SH 46 XS
Quick orderingMore infoKlüber Summit SH 46 XS
Synthetic air compressor oil enabling oil change intervals up to 10,000 operating hours
Application Klüber Summit SH 46 XS
Klüber Summit SH 46 SX was especially developed for the lubrication of highly loaded rotary screw compressors which require an oil formulated without the use of silicone raw materials. Klüber Summit SH 46 XS is intended for oil-injected rotary screw compressors with oil change intervals of up to 10,000 operating hours. Used compressors can be switched over from conventional mineral oils to Klüber Summit SH 46 XS. Klüber Summit SH 46 XS is neutral towards most elastomers typically used in air compressors - no leakage is to be expected. Klüber Summit SH 46 XS offers very good oxidation stability due to the synthetic base oil, thus minimising oxidation residues in the compressor and extending oil change intervals and the service life of the oil separator. The product contains special inhibitors to largely prevent the formation of residues in the compressors. Owing to the evaporation stability of the base oil, the oil vapour content in the compressed air can be considerably reduced compared to conventional mineral oils. This contributes to a reduction of oil consumption and clean compressed air; gumming of pneumatic valves in the compressed air circuit can be prevented as well due to the low oil content in the compressed air.
Show more€ 37,89 / L -
Klüber Klüberfood NH1 M 4-100
Quick orderingMore infoKlüber Klüberfood NH1 M 4-100
Fully synthetic high-performance oils for high-speed can closing machines
Application Klüber Klüberfood NH1 M 4-100
Lubrication of can seaming machines with either recirculating or total loss systems. Especially for those systems that have contamination of water or juice mixtures that need to be filtered. Circulating oil systems for bearings, chains and open gears on equipment in the food and beverage industry.
Show moreStarting at: € 27,39 / L -
Klüber Summit DSL 100
Quick orderingMore infoKlüber Summit DSL 100
Fully synthetic air compressor oils for oil change intervals up to 8,000 operating hours
Application Klüber Summit DSL 100
The Klüber Summit DSL 32 … 68 oils have been especially designed for oil change intervals up to 8,000 operating hours* in oil-injected screw-type compressors. Klüber Summit DSL 32 and 46 can also be used for the lubrication of centrifugal compressors, whereas Klüber Summit DSL 68 ... 125 is particularly suitable for the lubrication reciprocating piston compressors. Klüber Summit DSL oils are used for compressors that were previously run with conventional mineral oils. These oils are neutral towards most elastomer seals used in air compressors, therefore leakage is not to be expected. Klüber Summit DSL 32 oils are mainly used in reciprocating piston compressors which do not achieve the desired maintenance intervals when using mineral oils or which show severe residue formation (carbon buildups) on valves and in the compression chamber. Klüber Summit DSL 32, 46, and 68 are biodegradable and can therefore be used in eco-sensitive applications. Klüber Summit DSL oils offer good oxidation stability due to the synthetic base oil, thus minimizing oxidation residues in the compressors and extending oil change intervals and the service life of oil filters and separators (screw-type compressors) and valves (reciprocating piston compressors).
Show moreStarting at: € 28,22 / L -
Klüber Summit HySyn FG 32
Quick orderingMore infoKlüber Summit HySyn FG 32
Fully synthetic compressor oils for the food-processing and pharmaceutical industry
Application Klüber Summit HySyn FG 32
Klüber Summit HySyn oils can be used for oil-injected screwtype compressors, reciprocating piston compressors and centrifugal compressors. Klüber Summit HySyn FG oils are intended for use in compressors of the food-processing and pharmaceutical industry requiring oil-free compressed air (without oil vapour which cannot be removed by the oil separator). Klüber Summit HySyn FG oils can also be used for the lubrication of gears in oil-free screw-type compressors. Owing to their good stability, these oils are also suitable for lowtemperature applications in industrial gears. Furthermore, Klüber Summit HySyn FG 32-46-68 oils are used in chains, particularly those operating at low temperatures, e.g. in freezing tunnels.
Show moreStarting at: € 29,57 / L -
Klüber ISOFLEX LDS 18 SPECIAL A
Quick orderingMore infoKlüber ISOFLEX LDS 18 SPECIAL A
Dynamically light, long-term lubricating grease
Application Klüber ISOFLEX LDS 18 SPECIAL A
ISOFLEX LDS 18 SPECIAL A is suitable for plain and rolling bearings operating at low temperatures and/or high speeds, for example in grinding spindles, machine tool spindles, spindle bearings, textile spindles, bearings in OE-spinning turbines, bearings in precision and optical equipment.
Show moreStarting at: € 26,37 / L -
Klüber Klüberbio EG 2-100
Quick orderingMore infoKlüber Klüberbio EG 2-100
Environmentally compatible, synthetic high-performance gear oils
Application Klüber Klüberbio EG 2-100
Klüberbio EG 2 oils were developed for the lubrication of ships’ gearboxes, particularly for thrusters and rudder propellers. Leading manufacturers of thrusters and propeller shaft seals have tested and approved these oils. Please contact Klüber Lubrication or the manufacturer of the seal or thruster for technical consultation on your specific seallubricant combination. Klüberbio EG 2 oils protect rolling elements effectively against wear and pitting, thus complying with the requirements of rolling bearing manufacturers for highly loaded, large rolling bearings in pod drives. Klüberbio EG 2-68, 100 and 320 oils can also be used for the lubrication of open-running drive and conveyor chains, e.g. in installations and machines in agriculture, forestry and water resources industries as well as for horticultural appliances.
Show moreStarting at: € 26,93 / L -
Klüber Klüberbio EG 2-68
Quick orderingMore infoKlüber Klüberbio EG 2-68
Environmentally compatible, synthetic high-performance gear oils
Application Klüber Klüberbio EG 2-68
Klüberbio EG 2 oils were developed for the lubrication of ships’ gearboxes, particularly for thrusters and rudder propellers. Leading manufacturers of thrusters and propeller shaft seals have tested and approved these oils. Please contact Klüber Lubrication or the manufacturer of the seal or thruster for technical consultation on your specific seallubricant combination. Klüberbio EG 2 oils protect rolling elements effectively against wear and pitting, thus complying with the requirements of rolling bearing manufacturers for highly loaded, large rolling bearings in pod drives. Klüberbio EG 2-68, 100 and 320 oils can also be used for the lubrication of open-running drive and conveyor chains, e.g. in installations and machines in agriculture, forestry and water resources industries as well as for horticultural appliances.
Show moreStarting at: € 26,93 / L -
Klüber BARRIERTA I MI-202
Quick orderingMore infoKlüber BARRIERTA I MI-202
High-temperature greases with good long-term characteristics
Application Klüber BARRIERTA I MI-202
Rolling and plain bearings operating at elevated temperature BARRIERTA I greases attain long service lives when used in rolling and plain bearings operating under high thermal stress. The fine thickener and the high oil content enable smooth running of bearings also at high speeds and ensure a long life of the lubricated components. Typical fields of application are in film stretchers; textile stenter frames; precision engineering; clean-room engineering (e.g. microchip manufacture) The low vapour pressures of BARRIERTA I greases make them also recommendable for use in fine to ultra-high vacuum. Electrical contacts BARRIERTA I EL-102 and BARRIERTA I MI-202 have proven successful for the long-term lubrication of electrical contacts in high and medium-voltage switchboards. Component tests have shown that plug and unplug forces are consistent without unduly influencing transition resistance. There are no known decomposition products that would have an insulating effect on the contacts. Behaviour towards plastics and elastomers BARRIERTA I greases of all viscosity grades are widely neutral towards elastomers and plastics (possible exception: highly fluorinated rubber). Nevertheless, compatibility with the materials should be tested, especially prior to series application
Show more€ 726,96 -
Klüber Summit SH 55
Quick orderingMore infoKlüber Klüber Summit SH 55
Synthetic air compressor oils for oil change intervals up to 10,000 operating hours
Application Klüber Klüber Summit SH 55
Klüber Summit SH oils have been designed especially for the lubrication of highly loaded, oil-injected screw-type compressors with oil change intervals up to 10,000 operating hours. Klüber Summit SH oils can also be used for compressors that were previously run with mineral oils. They are neutral towards most elastomer seals used in air compressors, therefore leakage is not to be expected. Klüber Summit SH 32 is especially suitable for centrifugal compressors and Klüber Summit SH 100 for reciprocating piston compressors. Klüber Summit SH oils offer good oxidation stability due to the synthetic base oil, thus minimizing oxidation residues in the compressors and extending oil change intervals and the service life of oil filters and separators. Special inhibitors contained in the oils keep the inside of compressors clean. Owing to the evaporation stability of the base oil, the oil vapour content in the compressed air can be considerably reduced compared to conventional mineral oils. This contributes to a reduction of oil consumption and clean compressed air; gumming of pneumatic valves in the compressed air circuit can be prevented as well due to the low oil content of the Klüber Summit SH oils.
Show moreStarting at: € 27,66 / L -
Klüber Lamora D 100
Quick orderingMore infoKlüber Lamora D 100
Lubricating oils for slideways and guideways
Application Klüber Lamora D 100
LAMORA D oils are especially suited for the lubrication of heavily loaded slideways with low feed rates. LAMORA D oils have been tried and tested for the lubrication of slideways and guideways in modern machining centres, milling machines, lathes and other machine tools. As they show good compatibility with water-miscible machining fluids and cooling lubricants, LAMORA D oils can be used in applications where they may mix with aqueous media.
Show moreStarting at: € 20,14 / L -
Klüber Lamora D 150
Quick orderingMore infoKlüber Lamora D 150
Lubricating oils for slideways and guideways
Application Klüber Lamora D 150
LAMORA D oils are especially suited for the lubrication of heavily loaded slideways with low feed rates. LAMORA D oils have been tried and tested for the lubrication of slideways and guideways in modern machining centres, milling machines, lathes and other machine tools. As they show good compatibility with water-miscible machining fluids and cooling lubricants, LAMORA D oils can be used in applications where they may mix with aqueous media.
Show moreStarting at: € 10,23 / L -
Klüber Klüberalfa DH 3-100
Quick orderingMore infoKlüberalfa DH 3-100
High-temperature lubricating oils for sintered metal plain bearings and plastic components
Application Klüberalfa DH 3-100
Sintered metal components Klüberalfa DH 3 oils are used for the impregnation of sintered metal plain bearings subject to high temperatures where longterm lubrication is required. Due to their high thermal and chemical stability, additional lubrication with, for example, MIKROZELLA is normally not necessary. Plastic components Klüberalfa DH 3 oils are suitable for the lubrication of both plastic components and metal-plastic sliding contact surfaces. These clear, colourless and odourless oils do not form unwanted resins. Klüberalfa DH 3 oils are generally regarded as neutral towards elastomers and plastics (possible exception: perfluorinated rubber), so no negative effect on the material is to be expected. Nevertheless compatibility with the materials should be tested, especially prior to series application.
Show moreStarting at: € 736,99 -
€ 37,26 / L -
Klübersynth GEM 4-32 N
Quick orderingMore infoKlübersynth GEM 4-32 N
Synthetic high-performance gear and multipurpose oil with KlüberComp Lube Technology
Application Klübersynth GEM 4-32 N
Klübersynth GEM 4 N was specially developed for the lubrication of spur, bevel, hypoid and planetary gears that are subject to high loads. Such gears are frequently used in the wind, steel, mining and sugar industries. It is also used for the lubrication of standard worm gears as defined in DIN 3996. Klübersynth GEM 4 N can also be used for the lubrication of plain and rolling bearings, all kinds of toothed couplings, chains, guideways, joints, spindles and pumps, especially in applications where the equipment is exposed to elevated temperatures or pronounced temperature fluctuations.
Show moreStarting at: € 28,97 / L -
Klüber Summit NGSH 220
Quick orderingMore infoKlüber Summit NGSH 220
Synthetic gas compressor lubricants
Application Klüber Summit NGSH 220
Klüber Summit NGSH are designed for rotary screw and reciprocating compressors in natural gas service. Due to the varying make-up of gases and operating conditions, please contact your local Klüber representative for specific product recommendations.
Show moreStarting at: € 27,84 / L -
Klüber HOTEMP PLUS
Quick orderingMore infoKlüber HOTEMP PLUS
High-temperature chain oil
Application Klüber HOTEMP PLUS
HOTEMP PLUS is suitable for all oil-lubricated stenter chains such as – roller chains, – chains or clips with ball bearings in cases of combined lubrication of bearings, chain joints and slide ways, and – slide chains with lubrication of slide rails, chain joints and bolts in equalizing frames, single-layer stenters, tier stenters, festoon driers and steamers as well as installations.
Show moreStarting at: € 66,85 / L
Küber lubricants
High-performance Klüber oils and greases for optimal lubrication of assets. Resulting in higher reliability, less time spent on maintenance and lower lubricant consumption. With a lower cost to operate, fewer breakdowns, more performance, more output and a better result. Also food safe or biodegradable if required, with the official registrations and certifications.
What makes Klüber lubricants so good?
Klüber is the specialist for special greases and oils. I think there is no other brand with such a broad portfolio of lubricating greases as Klüber. Kluber's portfolio already includes more than 10,000 products. Therefore, you often see very high-quality and very specific products in their portfolio. The price of this specialist in lubricants is high, but fortunately very small packages are available.
My machine supplier prescribes Klüber lubricants. Should I use these?
Klüber has an extremely good relationship with these OEMs and has often looked very closely at the needs and requirements of these machine builders. Therefore, it is not always obvious to select a general product. In addition, warranty also plays an important role. If the consumption is not very high, we would save you the trouble of looking for an alternative.
Where can I buy Klüber oil in United Kingdom?
The easiest way is online! OilOnline delivers Klüber oil and greases in the whole Benelux. They are specialised in business use, but the private individual can also buy directly from the wholesaler.
Our customers value us
"We like your site, it shows that you are experts in lubricants!"
-- Ian Adair
"You deliver quicker than our previous UK supplier!"
-- Cris Scullion
"Surprise to us!
We paid to much in the past"
-- Stuart Wyatt
Our customers value us
"We like your site, it shows that you are experts in lubricants!"
-- Ian Adair
"You deliver quicker than our previous UK supplier!"
-- Cris Scullion
"Surprise to us!
We paid to much in the past"
-- Stuart Wyatt